Icon Q Boundless S4 User Manual - Pairing Devices Using Nfc

5  

2.  The indicator light on the back of the speaker will flash 

red and blue rapidly. The speaker is in pairing mode.  (If 

the speaker was already on, press the Bluetooth button 

on top of the speaker until the indicator light flashes 

red and blue.)

3.  Turn on your Bluetooth device and ensure its Bluetooth 

function is activated. You will find this option on most 

devices under Settings or Options.

4.  Follow your device’s instructions to search for Blue-

tooth devices. After a few seconds, your Bluetooth 

device will list the speaker as a discovered device. The 

speaker ID is “Boundless S4”.

5.  Select the Boundless S4 to pair the two devices. If asked 

for a passcode, enter “0000”.

6.  When the indicator light flashes blue only, it means 

your Bluetooth-compatible device has been success-

fully connected.

C. 

PAIRING DEVICES USING NFC

If you have an NFC enabled device, you can take advan-

tage of the Boundless S4’s NFC function for easier and 

quicker pairing. NFC lets you pair devices almost instanta-

neously by simply tapping them together.

Steps:

1.  Make sure the speaker is charged. Turn on the speaker.

2.  The indicator light by the power button will flash red 

and blue rapidly. The speaker is in pairing mode.

3.  Turn on your device and ensure its Bluetooth  is acti