Iconia W510 User Manual - Error Messages
Frequently asked questions - 61
If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorized service center for
assistance.
Disk boot failure
Insert a system (bootable) disk, then press
Enter> to reboot.
Equipment
configuration error
Press F2> (during POST) to enter the BIOS
utility, then press Exit in the BIOS utility to
reboot.
Hard disk 0 error
Contact your dealer or an authorized service
center.
Hard disk 0 extended
type error
Contact your dealer or an authorized service
center.
I/O parity error
Contact your dealer or an authorized service
center.
Keyboard error or no
keyboard connected
Contact your dealer or an authorized service
center.
Keyboard interface
error
Contact your dealer or an authorized service
center.
Memory size
mismatch
Press F2> (during POST) to enter the BIOS
utility, then press Exit in the BIOS utility to
reboot.