IConnectivity iConnectAUDIO 2 Owner's Manual - Quick Start
of
43
7
Quick Start
This Quick Start guide will get audio and MIDI in and out of your interface as simply as
possible.
NOTES ABOUT THE DEFAULT SETUP:
YOU WILL NOT HEAR ANYTHING UNTIL YOU BRING UP THE LEVELS as shown below. The
output levels come set all the way down for protection.
THE ANALOG COMBO INPUTS ARE ROUTED TO THE COMPUTERS, NOT THE OUTPUTS.
The default setup is for recording (or processing, or monitoring). You will only hear the audio
coming from the computer(s), unless you change the audio routing as explained later.