IConyx IC215S-R Operator's Manual
Digitally Steerable Line Array Loudspeaker Systems
IC
L
ive
ICL-R
Digitally Steerable Line Array
IC215S-R
Dual 15 Inch Subwoofer
OPERATORS GUIDE
ICL-R Preset Listing
Single Array
10 - Factory preset to ‘flat” and locked; for use in aural testing of transducers
11 - Beams factory preset for 50 foot throw and locked; DSP settings are not locked *
12 - Beams factory preset for 75 foot throw and locked; DSP settings are not locked *
13 - Beams factory preset for 100 foot throw and locked; DSP settings are not locked *
14 - See Note ________________________________________________________________________
________________________________________________________________________________
15 - ________________________________________________________________________________
________________________________________________________________________________
16 - ________________________________________________________________________________
________________________________________________________________________________
17 - ________________________________________________________________________________
________________________________________________________________________________
18 - ________________________________________________________________________________
________________________________________________________________________________
19 - ________________________________________________________________________________
________________________________________________________________________________
Stacked Arrays
20 - Factory preset to ‘flat” and locked; for use in aural testing of transducers.
21 - Beams factory preset for 100 foot throw and locked; DSP settings are not locked *
22 - Beams factory preset for 125 foot throw and locked; DSP settings are not locked *
23 - Beams factory preset for 150 foot throw and locked; DSP settings are not locked *
24 - See Note ________________________________________________________________________
________________________________________________________________________________
25 - ________________________________________________________________________________
________________________________________________________________________________
26 - ________________________________________________________________________________
________________________________________________________________________________
27 - ________________________________________________________________________________
________________________________________________________________________________
28 - ________________________________________________________________________________
________________________________________________________________________________
29 - ________________________________________________________________________________
________________________________________________________________________________
* Factory installed presets do not include DSP settings and are left open so DSP settings can be added.
Note. Bean steering information is loaded into Preset 14 (24) by quality assurance during final
performance testing to verify proper software/DSP operation. It is not locked and may be changed.
IC
L
ive
Operators Guide
RH 651 Rev E August 2011
19201 Cook Street, Foothill Ranch, CA USA • Phone: +1 949 588 9997 • Fax: +1 949 588 9514
sales@renkus-heinz.com • www.renkus-heinz.com