1. DL manuals
  2. Icop
  3. Touch Panel
  4. PDX3-090T-5A
  5. User manual

Icop PDX3-090T-5A User manual

Manual is about: DM&P Vortex86EX Panel PC with 9” TFT LCD

Summary of PDX3-090T-5A

  • Page 1

    I dm&p vortex86ex panel pc with 9” tft lcd  model: pex-090t-5a / pex-090t-8a user’s manual (revision 1.1a).

  • Page 2: Revision

    I revision date version description 2016/11/18 version 1.0 initial release 2017/01/10 version 1.1 specification correction.

  • Page 3: Copyright

    Ii pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this do...

  • Page 4: Table Of Contents

    Iii pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd table of contents table of contents ............................................................................................. Iii 1 .General information ............................................................................. 1 1.1...

  • Page 5: 1 .General Information

    1 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 1 .General information 1.1 product description pex-090t is an ultra-compact platform for the present demanding embedded and productive applications. It has new vortex86ex soc cpu which consumes only minimum power requirement when running at 4...

  • Page 6: Cpu Board Specifications

    2 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 1.2 product specification table 1-1 product specification cpu board specifications cpu dm&p vortex86ex - 400mhz cache l1:16kb i-cache, 16kb d-cache l2: 128kb cache bios coreboot bios memory 1gb ddr3 onboard watchdog timer software programmabl...

  • Page 7: Lcd Specifications

    3 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd weight 760g front panel protection ip 65 certification ce / fcc / vcci / vibration / shock lcd specifications display type 9” tft lcd backlight unit led display resolution 1024(w) x 600(h) brightness (cd/m 2 ) 300 nits contrast ratio 500 : 1 ...

  • Page 8

    4 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 1.3 inspection standard for tft-lcd panel table 1-2 inspection standard defect type limit note visual defect inter nal spot φ＜0.15mm ignore note1 0.15mm≦φ≦0.5mm n≦4 0.5mm＜φ n=0 fiber 0.03mm5mm n≦3 note1 1.0mm＜w, 1.5mm＜l n=0 polarizer bubble φ...

  • Page 9

    5 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd [note 1] w : width[mm], l : length[mm], n : number, φ: average diameter. 1. White / black spot 2. Polarizer bubble fig 1-1 fig 1-2 [note 2] bright dot is defined through 6% transmission nd filter as following. Fig 1-3.

  • Page 10

    6 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd [note 3] c area: center of display area o area: outer of display area [note 4] judge defect dot and adjacent dot as following. Allow below (as a, b, c and d status) adjacent defect dots, including bright and dart adjacent dot. And they will b...

  • Page 11: 1.4  Product  Dimension

    7 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 1.4 product dimension fig 1-4 product dimension.

  • Page 12

    8 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 1.5 panel mounting instruction 1. Cut a mounting hole in the panel. (refer to pex-090t dimensions on page 7) (note 1) 2. Check and remove the twelve m3 screws in a diagonal pattern as image below if necessary. 3. Place pex-090t face-down on a...

  • Page 13

    9 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd note 1: it is strongly recommended that a professional machine shop cut the mounting hole in the panel. Note 2: the length for all twelve m3 screws will be according to the thickness of mounting panel. For example: the length of standard m3 s...

  • Page 14: 1.6  Ordering Information

    10 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 1.6 ordering information table 1-3 ordering information part number description pex-090t-5a 9” panel pc w/512mb ddr3 / 2usb / line-out / lan / com / microsd / power adapter pex-090t-8a 9” panel pc w/512mb ddr3 / 2usb / line-out / lan / com /...

  • Page 15: 2 .System Installation

    11 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 2 .System installation 2.1 cpu board outline fig 2-1 pex cpu board.

  • Page 16: 2.2 Connector Summary

    12 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 2.2 connector summary table 2-1 summary table nbr description type of connections pin nbrs. J3 usb external usb connector 6-pin j4 usb external usb connector 6-pin j5 usb (optional) 2.0mm 5-pin wafer 5-pin j8 ps/2 keyboard 2.54mm 5-pin box h...

  • Page 17

    13 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 2.3 connector pin assignments j3: usb pin # signal name pin # signal name 1 vcc 2 usbd2- 3 usbd2+ 4 gnd 5 gnd 6 gnd j4: usb pin # signal name pin # signal name 1 vcc 2 usbd3- 3 usbd3+ 4 gnd 5 gnd 6 gnd j5: usb (optional) pin # signal name 1 ...

  • Page 18

    14 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd j14: vga pin # signal name pin # signal name 1 r out 2 gnd 3 g out 4 gnd 5 b out 6 gnd 7 hsync 8 gnd 9 vsyncd 10 gnd j24: mic-in pin # signal name 1 micvref 2 gnd 3 gnd 4 mic-in j25: com3 (tx, rx) pin # signal name 1 gnd 2 txd3 3 rxd3 j26: c...

  • Page 19

    15 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 2.4 external i/o overview { pex-090t-8a } fig 2-2 pex-090t-8a i/o overview { pex-090t-5a } fig 2-3 pex-090t-5a i/o overview {note} 1. Wlan is optional 2. Com1 rs232/422/485 is selected by bios. For rs422 or rs485 signals, please contact your...

  • Page 21

    17 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd j10: com1 rs232/422/485 (change setting by bios) pin # signal name pin # signal name 1 dcd1/422tx-/rs485- 2 rxd1/422tx+/rs485+ 3 txd1 / 422rx+ 4 dtr1 / 422rx- 5 gnd 6 dsr1 7 rts1 8 cts1 9 ri1 rj45 pin # signal name pin # signal name 1 ftxd+ ...

  • Page 22: 2.6  System Mapping

    18 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 2.6 system mapping table 2-2 technical data sheet system mapping memory mapping address description usage 00000000-0009ffff system ram * 000a0000-000affff ega/vga video memory * 000b0000-000b7fff mda ram, hercules graphics display ram * 000b...

  • Page 23

    19 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 0064h keyboard / mouse status / command port * 0065h watchdog0 reload counter * 0070h - 0071h cmos ram port * 0072h - 0075h mtbf control register * 0078h - 007ch gpio port 0,1,2,3,4 default setup * 0080h - 008fh dma page register * 0092h sys...

  • Page 24: Irq Mapping

    20 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd irq mapping irq# description usage irq0 system timer * irq1 keyboard controller * irq2 cascade for irq8 - 15 irq3 unassigned * irq4 serial port 1 * irq5 vga * irq6 audio irq7 ethernet 10/100m lan * irq8 real time clock * irq9 unassigned * ir...

  • Page 25: 2.7  Watchdog Timer

    21 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 2.7 watchdog timer there are two watchdog timers in pex-090t, we also provide dos, linux and wince example for your reference. For more technical support, please visit: http://tech.Icop.Com.Tw or download the pdf file: dmp.Com.Tw/tech.

  • Page 26: 3 .Driver Installation

    22 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd 3 .Driver installation vga the pex-090t is using dmp's vx86vga-9160 display chip, which is an ultra low powered graphics chipset. Lan the vortex86ex processor is integrated 10/100mbps ethernet controller that supports both 10/100base-t and a...

  • Page 27

    23 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd operating system support the pex-090t provides the vga and lan drivers for linux, windows ce, windows xp and windows embedded standard (wes2009). Please get the drivers from icop official website: tech.Icop.Com.Tw pex-090t also supports most...

  • Page 28: Warranty

    24 pex-090t dm&p vortex86ex panel pc with 9” wsvga tft lcd warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair...