ICOP Technology VDX-6324RD User manual

Manual is about: DM&P Vortex86DX 800MHz Half-Size CPU Module with 4S/4USB/VGA/LCD/LAN/GPIO/PWMx16 256MB DDR2 Onboard

Summary of VDX-6324RD

  • Page 1

    Full 16-bit isa bus vdx-6324rd dm&p vortex86dx 800mhz half-size cpu module with 4s/4usb/vga/lcd/lan/gpio/pwmx16 256mb ddr2 onboard user’s manual (revision 1.2a).

  • Page 2

    Copyright the information in this manual is subject to change without notice for continuous improvement of the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracy that may be contained in this document and makes no commitment to update or to keep current t...

  • Page 3

    T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s ............................................................. Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list ............................................................ 1 1.2 product description ..........................

  • Page 4: This Page Is Blank

    This page is blank.

  • Page 5: C H A P T E R    1

    Vortex86dx-6324rd vortex86dx half-size cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vdx-6324rd embedded vortex86dx cpu all-in-one board rs232 cable x 3 print cable x1 ide cable x 1 usb cable x 2 (usb port x 2 ) gpio cable x 1 ykb for ps/2 keyboard & mouse x 1.

  • Page 6

    Vortex86dx-6324rd vortex86dx half-size cpu module 2 1.2 product description the vdx-6324 family of low-power x86 embedded controller is designed to meet half-size specification with full 16-bit isa bus, and integrated with the following features. 800mhz vortex86dx system-on-chip vga, tft/lvds lcd su...

  • Page 7: 1.3    Specifications

    Vortex86dx-6324rd vortex86dx half-size cpu module 3 1.3 specifications features vdx-6324 cpu dm&p soc cpu vortex86dx- 800mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache, l2 cache 128kb bios ami bios bus interface pc/104 standard compliant (optional: pci-104) system ...

  • Page 8

    Vortex86dx-6324rd vortex86dx half-size cpu module 4 connectors 2.54mm ∅ 26-pin box header for print x1 2.54mm ∅ 10-pin box header for rs-232 x3 2.54mm ∅ 10-pin box header for usbx2 2.54mm ∅ 20-pin box header for 16-bit gpio x1 2.54mm ∅ 3-pin header for rs-485 x1 2.54mm ∅ 2-pin header for reset x1 2....

  • Page 9: 1.4    Board Dimension

    Vortex86dx-6324rd vortex86dx half-size cpu module 5 1.4 board dimension.

  • Page 10: Installation

    Vortex86dx-6324rd vortex86dx half-size cpu module 6 c h a p t e r 2 c h a p t e r 2 c h a p t e r 2 c h a p t e r 2 installation 2.1 board outline com4 com3 com2 rs-232/422/485 gpio lcd connector display type selection rs-485 power connector usb x 2 com1 usb x 2 lan vga ps/2 kb/mouse flexible dc pow...

  • Page 11: Connectors

    Vortex86dx-6324rd vortex86dx half-size cpu module 7 2.2 connectors & jumpers location connectors.

  • Page 12: Jumpers & Leds

    Vortex86dx-6324rd vortex86dx half-size cpu module 8 jumpers & leds.

  • Page 13: Summary Table

    Vortex86dx-6324rd vortex86dx half-size cpu module 9 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 ide box header, 2.0 ∅ , 22x2 44-pin j2 usb1 box header, 2.54 ∅ , 5x2 10-pin j3 usb2 box header, 2.54 ∅ , 5x2 10-pin j4 jtag wafer, 1.25 ∅ , 6x1 6-pin j5...

  • Page 14

    Vortex86dx-6324rd vortex86dx half-size cpu module 10 j41 console redirection (optional) pin header, 2,54 ∅ ,1x2 2-pin pwr-l ed power active led (red) led-smd ide- led ide active led (green ) led-smd mtbf- led mtbf-out (orange) led-smd cf1 compact flash type i/ii cf connector 50-pin sp1 buzzer.

  • Page 15: J1: Ide (44 Pins)

    Vortex86dx-6324rd vortex86dx half-size cpu module 11 2.4 pin assignments & jumper settings j1: ide (44 pins) j2: usb 1 pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd0- 4 lusbd1- 5 lusbd0+ 6 lusbd1+ 7 gnd 8 gnd 9 ggnd 10 ggnd pin # signal name pin # signal name 1 iderst 2 gnd 3 ided7 4 ided8...

  • Page 16: J3: Usb 2

    Vortex86dx-6324rd vortex86dx half-size cpu module 12 j3: usb 2 pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd2- 4 lusbd3- 5 lusbd2+ 6 lusbd3+ 7 gnd 8 gnd 9 ggnd 10 ggnd j4: jtag pin # signal name pin # signal name 1 vcc 2 gnd 3 tck 4 tdo 5 tdi 6 tms j5: reset pin # signal name pin # signal ...

  • Page 17: J8: Ps/2 Kbd / Mouse

    Vortex86dx-6324rd vortex86dx half-size cpu module 13 j8: ps/2 kbd / mouse pin # signal name pin # signal name 1 kbclk 2 msclk 3 gnd 4 kbdat 5 msdat 6 vcc 7 gnd 8 gnd 9 gnd j9: com 1 (optional: ttl/ gpio-p4 / pwmx8) pin # signal name pin # signal name 1 dcd1 2 rxd1 3 txd1 4 dtr1 5 gnd 6 dsr1 7 rts1 8...

  • Page 18

    Vortex86dx-6324rd vortex86dx half-size cpu module 14 j11: gpio (port 0 / port 1/pwmx16) j12: rs485 (auto direction) j17: power connector – 4-pin header (p4 molex 5mm) pin # signal name 1 +5v 2 gnd 3 gnd 4 +12v pin # signal name pin # signal name 1 gnd 2 vcc 3 gp00 4 gp10 5 gp01 6 gp11 7 gp02 8 gp12 ...

  • Page 19: J19: Com3 (Optional: Ttl)

    Vortex86dx-6324rd vortex86dx half-size cpu module 15 j18: power connector (terminal block 5.0mm) pin # signal name 1 +5v 2 gnd j19: com3 (optional: ttl) pin # signal name pin # signal name 1 dcd3 2 rxd3 3 txd3 4 dtr3 5 gnd 6 dsr3 7 rts3 8 cts3 9 ri3 10 nc j20: print pin # signal name pin # signal na...

  • Page 20

    Vortex86dx-6324rd vortex86dx half-size cpu module 16 j22: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk * 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd1 16 ows 17 sd0 18 +12v 19 iochrdy 20 gnd 21 aen 22 smemw * 23 sa19 24 sme...

  • Page 21

    Vortex86dx-6324rd vortex86dx half-size cpu module 17 j24: pc104 connector – 40pin j26: 4p power source (interconnect to pc/104 – j22) pin # signal name 1 -5v 2 -12v 3 +12v 4 gnd pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16 * 4 sbhe * 5 iocs16 * 6 sa23 7 irq10 8 sa22 9 irq11 10 sa21 11 i...

  • Page 22: J27: Pc/104 + (Optional)

    Vortex86dx-6324rd vortex86dx half-size cpu module 18 j27: pc/104 + (optional) vi/o setting: +5v only if you need to use vi/o as +3.3v, please use vdx-6324-fd-plus pin # a b c d 1 gnd nc +5v ad00 2 vi/o(+5v) ad02 ad01 +5v 3 ad05 gnd ad04 ad03 4 c/be0# ad07 gnd ad06 5 gnd ad09 ad08 gnd 6 ad11 vi/o(+5v...

  • Page 23: J29: Lcd Connector

    Vortex86dx-6324rd vortex86dx half-size cpu module 19 j28: vga (d-sub connector) pin # signal name pin # signal name 1 r out 2 g out 3 b out 4 nc 5 gnd 6 gnd 7 gnd 8 gnd 9 vcc 10 gnd 11 nc 12 ddcdat 13 hsync 14 vsync 15 ddcclk j29: lcd connector pin # signal name pin # signal name 1 +3.3v 2 +3.3v 3 l...

  • Page 24: J36: Lan

    Vortex86dx-6324rd vortex86dx half-size cpu module 20 j30~j35: display type setup (crt /lcd) connector pin # signal name j30 1 vcc 2 gpioa 3 gnd j31 1 vcc 2 gpiob 3 gnd j32 1 vcc 2 gpioc 3 gnd j33 1 vcc 2 gpiod 3 gnd j34 1 vcc 2 gpioe 3 gnd j35 1 vcc 2 gpiof 3 gnd (please refer to appendix d, for dis...

  • Page 25: J37: Line Out (Optional)

    Vortex86dx-6324rd vortex86dx half-size cpu module 21 j37: line out (optional) pin # signal name 1 loutr 2 gnd 3 gnd 4 loutl j38: mic-in (optional) pin # signal name 1 micvref 2 gnd 3 gnd 4 mic-in j39: jtag disable (default setting pin 1 & pin 2 short) pin # signal name pin # signal name 1 gnd 2 jtag...

  • Page 26: 2.5

    Vortex86dx-6324rd vortex86dx half-size cpu module 22 2.5 system mapping.

  • Page 27

    Vortex86dx-6324rd vortex86dx half-size cpu module 23.

  • Page 28

    Vortex86dx-6324rd vortex86dx half-size cpu module 24.

  • Page 29: 2.6  Watchdog Timer

    Vortex86dx-6324rd vortex86dx half-size cpu module 25 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and the new one is called wdt1. We also provide dos, linu...

  • Page 30

    Vortex86dx-6324rd vortex86dx half-size cpu module 26 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We als...

  • Page 31

    Vortex86dx-6324rd vortex86dx half-size cpu module 27 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost ...

  • Page 32

    Vortex86dx-6324rd vortex86dx half-size cpu module 28 2.9 pwm (pulse-width modulation) pulse-width modulation (pwm) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. The popu...

  • Page 33: Sd-1917

    Vortex86dx-6324rd vortex86dx half-size cpu module 29 3.0 ide to sd (micro-sd) vortex86dx soc also built-in simulation circuit to adapt sd to ide in order to allow your system to recognize micro-sd card as c: or d: driver sd-1917: 44 pins ide to sd adapter is an ideal solution for industrial pc or em...

  • Page 34: Driver Installation

    Vortex86dx-6324rd vortex86dx half-size cpu module 30 c h a p t e r 3 c h a p t e r 3 c h a p t e r 3 c h a p t e r 3 driver installation vga thevortex86dx processor also use external display chip ““volari™ z9s” which is an ultra low powered graphics chipset with total power consumption at around 1-1...

  • Page 35: Appendix

    Vortex86dx-6324rd vortex86dx half-size cpu module 31 appendix a. Tft flat panel data output.

  • Page 36: Size

    Vortex86dx-6324rd vortex86dx half-size cpu module 32 b. Tft flat panel support list size brand resolution model no. 5.7” data image 320x240 fg050701dsswbg01 5.7” optrex 320x240 55264gd057j-fw-abn 5.7” toshiba 320x240 lta057a343f 5.7” sharp 320x240 (qvga / vga) lq057q3dc02 5.7” kyocera 320x240 (qvga ...

  • Page 37

    Vortex86dx-6324rd vortex86dx half-size cpu module 33.

  • Page 38: Size

    Vortex86dx-6324rd vortex86dx half-size cpu module 34 size brand resolution model no. 8” auo 800x600 (tft 24bits) a080sn01 v0 8.4” sharp 800x600 lq084s3dg01 10.4” pvi 640x480 pd104vt1/vt2 10.4” nec 640x480 nl6448ac33-18 10.4” nec 640x480 nl6448ac33-29 10.4” nec 640x480 nl6448bc33-59 10.4” sharp 640x4...

  • Page 39: Icop–0096

    Vortex86dx-6324rd vortex86dx half-size cpu module 35 c. Lvds flat panel support list if you would like to use lvds flat panel with vortex86sx / vortex86dx series, please contact our regional sales to get icop-0096 information or visit icop website: http://www.Icop.Com.Tw/pddetail.Aspx?Id=65&pid=4 ic...

  • Page 40: Display Type Setup

    Vortex86dx-6324rd vortex86dx half-size cpu module 36 d. Flat panel hardware setting: the vdx-6324rd offers the hardware setting for the various tft lcd flat panels support and please make sure the jumper setting (j30~j35) before you connect the lcd. Display type setup connector lcd 1-2 2-3 j30 c j31...

  • Page 41: Hardware

    Vortex86dx-6324rd vortex86dx half-size cpu module 37 e. Flat panel wiring and lighting hardware before you connect the tft lcd flat panel with vdx-6324rd, please make sure that the input voltage of lcd is +3.3v. Bios please contact or e-mail our regional sales to get the special bios for any tft lcd...

  • Page 42

    Vortex86dx-6324rd vortex86dx half-size cpu module 38 f. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/dhcp, ftp ...

  • Page 43

    Vortex86dx-6324rd vortex86dx half-size cpu module 39 g. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to ...

  • Page 44: Warranty

    Vortex86dx-6324rd vortex86dx half-size cpu module 40 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at...