- DL manuals
- ICOP Technology
- Computer Hardware
- VDX-6350E
- User manual
ICOP Technology VDX-6350E User manual
Summary of VDX-6350E
Page 1
Vdx-6350e / vdx-6350e-plus dm&p vortex86dx 800mhz pc/104 cpu module with 4s/2usb/lan/gpio/pwmx16 256mb ddr2 onboard user’s manual (revision 1.0a).
Page 2: Copyright
Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document. And makes no commitment to update or to keep curren...
Page 3
T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s .............................................................Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list............................................................ 1 1.2 product description.............................
Page 4: C H A P T E R 1
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vdx-6350e & vdx-6350e-plus embedded vortex86dx cpu all-in-one board manual & drivers cd x 1 rs232 cable x 4 print cable x1 ide cable x 1 usb cable x 1 (usb port x 2 ) lan cable x 1 gpi...
Page 5: 1.2 Product Description
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 2 1.2 product description the vdx-6350e family of low-power x86 embedded controller is designed to meet pc/104 specification, and integrated with the following features. 800mhz vortex86dx system-on-chip 256 / 512mb ddr2 system memory enhanced ide (ultra...
Page 6: 1.3 Specifications
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 3 1.3 specifications features vdx-6350e cpu dm&p soc cpu vortex86dx- 800mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache l2:128kb cache bios ami bios bus interface pc/104 standard compliant (optional: pci-104) system mem...
Page 7: 1.4 Board Dimension
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 4 1.4 board dimension.
Page 8: C H A P T E R 2
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 5 c h a p t e r 2 installation 2.1 board outline (note1: com2 rs232/485 is selected by bios setting) (note2: pci-104 connector is optional) (note3: vi/o default setting of pci-104 connector is +5v) (note4: vdx-6350e-512 is optional) (note5: redundancy s...
Page 9: Connectors
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 6 2.2 connectors & jumpers location connectors (note1: j7 /j8 /j23 are optional).
Page 10: Jumpers & Leds
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 7 jumpers & leds.
Page 11: Summary Table
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 8 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 ide box header, 2.0 ∅ ,22x2 44-pin j2 usb box header,2.0 ∅ , 5x2 10-pin j4 lan pin header, 2.0 ∅ , 4x2 8-pin j5 jtag wafer, 1.25 ∅ , 6x1 6-pin j6 reset pin...
Page 12: J1: Ide (44 Pins)
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 9 2.4 pin assignments & jumper settings j1: ide (44 pins) j2: usb pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd3- 4 lusbd2- 5 lusbd3+ 6 lusbd2+ 7 gnd 8 gnd 9 ggnd 10 ggnd pin # signal name pin # signal name 1 iderst 2 gnd 3 ided7 4 ided8 5 ide...
Page 13: J4: Lan
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 10 j4: lan pin # signal name pin # signal name 1 atx+ 2 atx- 3 arx+ 4 led0 5 led0+ 6 arx- 7 led1+ 8 led1 j5: jtag pin # signal name pin # signal name 1 vcc 2 gnd 3 tck 4 tdo 5 tdi 6 tms j6: reset pin # signal name pin # signal name 1 rst_sw 2 gnd j7: re...
Page 14: J9: Ps/2 Keyboard
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 11 j9: ps/2 keyboard pin # signal name pin # signal name 1 kbclk 2 kbdat 3 nc 4 gnd 5 vcc j10: ps/2 mouse pin # signal name pin # signal name 1 msclk 2 msdata 3 nc 4 gnd 5 vcc j11: com 1 (optional ttl/ gpio-p4 / pwmx8) pin # signal name pin # signal nam...
Page 15: J15: Rs485 (Auto Direction)
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 12 j13: gpio ( port 0 / 1 /pwmx16) j15: rs485 (auto direction) j16: power connector (terminal block 5.0mm) pin # signal name 1 +5v 2 gnd j17: com3 pin # signal name pin # signal name 1 dcd3 2 rxd3 3 txd3 4 dtr3 5 gnd 6 dsr3 7 rts3 8 cts3 9 ri3 10 nc pin...
Page 16: J18: Print
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 13 j18: print pin # signal name pin # signal name 1 stb- 14 afd- 2 pd0 15 err- 3 pd1 16 init- 4 pd2 17 slin- 5 pd3 18 gnd 6 pd4 19 gnd 7 pd5 20 gnd 8 pd6 21 gnd 9 pd7 22 gnd 10 ack- 23 gnd 11 busy 24 gnd 12 pe 25 gnd 13 slct 26 nc j19: com4 pin # signal...
Page 17
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 14 j20: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk * 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd1 16 ows 17 sd0 18 +12v 19 iochrdy 20 gnd 21 aen 22 smemw * 23 sa19 24 smemr ...
Page 18
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 15 j21: pc104 connector – 40pin j22: 4p power source (interconnect to pc/104 – j20) pin # signal name 1 -5v 2 -12v 3 +12v 4 gnd pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16 * 4 sbhe * 5 iocs16 * 6 sa23 7 irq10 8 sa22 9 irq11 10 sa21 11 irq1...
Page 19: J23: Pc/104 + (Optional)
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 16 j23: pc/104 + (optional) vi/o default setting: +5v if you need to use vi/o as +3.3v, please see the page 19. Pin # a b c d 1 gnd nc +5v ad00 2 vi/o(+5v) ad02 ad01 +5v 3 ad05 gnd ad04 ad03 4 c/be0# ad07 gnd ad06 5 gnd ad09 ad08 gnd 6 ad11 vi/o(+5v) ad...
Page 20: R213
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 17 please remove the 0 ohm (1206 type) of r212 and add 0 ohm (1206 type) on r213.
Page 21: J33: Line Out (Optional)
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 18 j33: line out (optional) pin # signal name 1 loutr 2 gnd 3 gnd 4 loutl j34: mic-in (optional) pin # signal name 1 micvref 2 gnd 3 gnd 4 mic-in.
Page 22: 2.5
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 19 2.5 system mapping.
Page 23
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 20
Page 24
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 21.
Page 25: 2.6 Watchdog
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 22 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux and w...
Page 26: 2.7 Gpio
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 23 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We also o...
Page 27
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 24 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost man...
Page 28: 2.9 Pwm
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 25 2.9 pwm (pulse-width modulation) pulse-width modulation (pwm) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. The popular...
Page 29: 3.0 Ide
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 26 3.0 ide to sd (micro-sd) vortex86dx soc also built-in simulation circuit to adapt sd to ide in order to allow your system to recognize micro-sd card as c: or d: driver sd-1917: 44 pins ide to sd adapter is an ideal solution for industrial pc or embed...
Page 30: C H A P T E R 3
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 27 c h a p t e r 3 driver installation lan the vortex86dx processor also integrated 10/100mbps ethernet controller that supports both 10/100base-t and allows direct connection to your 10/100mbps ethernet based local area network for full interaction wit...
Page 31: Appendix
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 28 appendix a. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/dhcp...
Page 32: B. Bios Default Setting
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 29 b. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to loa...
Page 33: Warranty
Vortex86dx-6350e vortex86dx™ pc/104 cpu module 30 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no...