- DL manuals
- ICOP Technology
- Computer Hardware
- VDX-6354RD
- User manual
ICOP Technology VDX-6354RD User manual
Summary of VDX-6354RD
Page 1
Vdx-6354rd / vdx-6354rd-plus dm&p vortex86dx 800mhz pc/104 cpu module with 4s/2usb/vga/lcd/audio/ lan/gpio/pwmx16 256mb ddr2 onboard user’s manual (revision 1.2a).
Page 2
Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current...
Page 3
T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s ............................................................. Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list ............................................................ 1 1.2 product description ..........................
Page 4: This Page Is Blank
This page is blank.
Page 5: C H A P T E R 1
Vdx-6354rd vortex86dx pc/104 cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vdx-6354rd & vdx-6354rd-plus embedded vortex86dx cpu all-in-one board manual & drivers cd x 1 rs232 cable x 4 printer cable x1 ide cable x 1 usb cable x 1 (usb port x 2 ) vga cable x 1 lan ca...
Page 6
Vdx-6354rd vortex86dx pc/104 cpu module 2 1.2 product description the vdx-6354rd family of low-power x86 embedded controller is designed to meet pc/104 specification, and integrated with the following features. 800 mhz vortex86dx soc vga, tft/ lvds lcd support up to 1280x1024 resolution 256 / 512mb ...
Page 7: 1.3 Specifications
Vdx-6354rd vortex86dx pc/104 cpu module 3 1.3 specifications features vdx-6354rd cpu dm&p soc cpu vortex86dx- 800mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache l2:128kb cache bios ami bios bus interface pc/104 standard compliant (optional: pci-104) system memory 25...
Page 8
Vdx-6354rd vortex86dx pc/104 cpu module 4 flash disk support onboard 4mb spi flash disk (driver: a) 44-pin ide flash disk( embeddisk 16mb or above) 44-pin ide to micro sd (optional) pwm 16~24 channels power requirement single voltage +5v@740ma dimension 90 x 96mm (3.54 x 3.77 inches) weight 90g oper...
Page 9: 1.4 Board Dimension
Vdx-6354rd vortex86dx pc/104 cpu module 5 1.4 board dimension.
Page 10: Installation
Vdx-6354rd vortex86dx pc/104 cpu module 6 c h a p t e r 2 installation 2.1 board outline note: 1. Com2 rs232/422/485 is selected in bios setting 2. Pci-104 connector is optional 3. Vi/o default voltage of pci-104 connector is +5v 4. Vdx-6354rd-512 is optional 5. Redundancy signal and system-fail-sw ...
Page 11: Connectors
Vdx-6354rd vortex86dx pc/104 cpu module 7 2.2 connectors & jumpers location connectors.
Page 12: Jumpers & Leds
Vdx-6354rd vortex86dx pc/104 cpu module 8 jumpers & leds.
Page 13: Summary Table
Vdx-6354rd vortex86dx pc/104 cpu module 9 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 ide box header, 2.0 ∅ ,22x2 44-pin j2 usb box header,2.0 ∅ , 5x2 10-pin j4 lan pin header, 2.0 ∅ , 4x2 8-pin j5 jtag wafer, 1.25 ∅ , 6x1 6-pin j6 reset pin header...
Page 14
Vdx-6354rd vortex86dx pc/104 cpu module 10 led 3 lan link/active led (green) led-smd led 4 lan duplex led ( yellow ) led-smd sp1 buzzer.
Page 15: J1: Ide (44 Pins)
Vdx-6354rd vortex86dx pc/104 cpu module 11 2.4 pin assignments & jumper settings j1: ide (44 pins) j2: usb pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd3- 4 lusbd2- 5 lusbd3+ 6 lusbd2+ 7 gnd 8 gnd 9 ggnd 10 ggnd pin # signal name pin # signal name 1 iderst 2 gnd 3 ided7 4 ided8 5 ided6 6 i...
Page 16: J4: Lan
Vdx-6354rd vortex86dx pc/104 cpu module 12 j4: lan pin # signal name pin # signal name 1 atx+ 2 atx- 3 arx+ 4 led0 5 led0+ 6 arx- 7 led1+ 8 led1 j5: jtag pin # signal name pin # signal name 1 vcc 2 gnd 3 tck 4 tdo 5 tdi 6 tms j6: reset pin # signal name pin # signal name 1 rst_sw 2 gnd j7: redundanc...
Page 17: J9: Ps/2 Keyboard
Vdx-6354rd vortex86dx pc/104 cpu module 13 j9: ps/2 keyboard pin # signal name pin # signal name 1 kbclk 2 kbdat 3 nc 4 gnd 5 vcc j10: ps/2 mouse pin # signal name pin # signal name 1 msclk 2 msdata 3 nc 4 gnd 5 vcc j11: com1 (optional: ttl / gpio-p4 / pwmx8) pin # signal name pin # signal name 1 dc...
Page 18: J17: Com3 (Optional: Ttl)
Vdx-6354rd vortex86dx pc/104 cpu module 14 j13: gpio (port 0/1 / pwmx16) j15: rs485 (auto direction) j16: power connector (terminal block 5.0mm) pin # signal name 1 +5v 2 gnd j17: com3 (optional: ttl) pin # signal name pin # signal name 1 dcd3 2 rxd3 3 txd3 4 dtr3 5 gnd 6 dsr3 7 rts3 8 cts3 9 ri3 10...
Page 19: J18: Print
Vdx-6354rd vortex86dx pc/104 cpu module 15 j18: print pin # signal name pin # signal name 1 stb- 14 afd- 2 pd0 15 err- 3 pd1 16 init- 4 pd2 17 slin- 5 pd3 18 gnd 6 pd4 19 gnd 7 pd5 20 gnd 8 pd6 21 gnd 9 pd7 22 gnd 10 ack- 23 gnd 11 busy 24 gnd 12 pe 25 gnd 13 slct 26 nc j19: com4 (optional: ttl) pin...
Page 20
Vdx-6354rd vortex86dx pc/104 cpu module 16 j20: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk* 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd1 16 ows 17 sd0 18 +12v 19 iochrdy 20 gnd 21 aen 22 smemw* 23 sa19 24 smemr* 25 sa18 ...
Page 21
Vdx-6354rd vortex86dx pc/104 cpu module 17 j21: pc104 connector – 40pin j22: 4p power source (interconnect to pc/104 – j20) pin # signal name 1 -5v 2 -12v 3 +12v 4 gnd pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16* 4 sbhe* 5 iocs16* 6 sa23 7 irq10 8 sa22 9 irq11 10 sa21 11 irq12 12 sa20 ...
Page 22: J23: Pc/104 + (Optional)
Vdx-6354rd vortex86dx pc/104 cpu module 18 j23: pc/104 + (optional) vi/o default setting: +5v if you need to use vi/o as +3.3v, please see the page 19. Pin # a b c d 1 gnd nc +5v ad00 2 vi/o(+5v) ad02 ad01 +5v 3 ad05 gnd ad04 ad03 4 c/be0# ad07 gnd ad06 5 gnd ad09 ad08 gnd 6 ad11 vi/o(+5v) ad10 gnd ...
Page 23: R213
Vdx-6354rd vortex86dx pc/104 cpu module 19 please remove the 0 ohm (1206 type) of r212 and add 0 ohm (1206 type) on r213.
Page 24: J24: Vga
Vdx-6354rd vortex86dx pc/104 cpu module 20 j24: vga pin # signal name pin # signal name 1 r out 2 gnd 3 g out 4 gnd 5 b out 6 gnd 7 hsync 8 gnd 9 vsyncd 10 gnd j25: lcd (dvo) connector pin # signal name pin # signal name 1 +3.3v 2 +3.3v 3 lg2 4 lg3 5 lg4 6 lg5 7 nc 8 nc 9 lr0 10 lr1 11 lr2 12 lr3 13...
Page 25: J33: Line Out
Vdx-6354rd vortex86dx pc/104 cpu module 21 j33: line out pin # signal name 1 loutr 2 gnd 3 gnd 4 loutl j34: mic-in pin # signal name 1 micvref 2 gnd 3 gnd 4 mic-in.
Page 26: 2.5
Vdx-6354rd vortex86dx pc/104 cpu module 22 2.5 system mapping.
Page 27
Vdx-6354rd vortex86dx pc/104 cpu module 23.
Page 28
Vdx-6354rd vortex86dx pc/104 cpu module 24.
Page 29: 2.6 Watchdog Timer
Vdx-6354rd vortex86dx pc/104 cpu module 25 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux and wince ex...
Page 30
Vdx-6354rd vortex86dx pc/104 cpu module 26 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We also offer do...
Page 31
Vdx-6354rd vortex86dx pc/104 cpu module 27 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost many of us...
Page 32
Vdx-6354rd vortex86dx pc/104 cpu module 28 2.9 pwm (pulse-width modulation) pulse-width modulation (pwm) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. The popular applic...
Page 33: Sd-1917
Vdx-6354rd vortex86dx pc/104 cpu module 29 3.0 ide to sd (micro-sd) vortex86dx soc also built-in simulation circuit to adapt sd to ide in order to allow your system to recognize micro-sd card as c: or d: driver sd-1917: 44 pins ide to sd adapter is an ideal solution for industrial pc or embedded sys...
Page 34: Driver Installation
Vdx-6354rd vortex86dx pc/104 cpu module 30 c h a p t e r 3 driver installation vga thevortex86dx processor also use external display chip ““volari™ z9s” which is an ultra low powered graphics chipset with total power consumption at around 1-1.5 w. It is capable in providing vga display output upto 1...
Page 35: Appendix
Vdx-6354rd vortex86dx pc/104 cpu module 31 appendix a. Tft flat panel data output.
Page 36: Size
Vdx-6354rd vortex86dx pc/104 cpu module 32 b. Tft flat panel support list size brand resolution model no. 5.7” data image 320x240 fg050701dsswbg01 5.7” optrex 320x240 55264gd057j-fw-abn 5.7” toshiba 320x240 lta057a343f 5.7” sharp 320x240 (qvga / vga) lq057q3dc02 5.7” kyocera 320x240 (qvga / vga) tcg...
Page 37: Size
Vdx-6354rd vortex86dx pc/104 cpu module 33 size brand resolution model no. 8” auo 800x600 (tft 24bits) a080sn01 v0 8.4” sharp 800x600 lq084s3dg01 10.4” pvi 640x480 pd104vt1/vt2 10.4” nec 640x480 nl6448ac33-18 10.4” nec 640x480 nl6448ac33-29 10.4” nec 640x480 nl6448bc33-59 10.4” sharp 640x480 lq104v1...
Page 38: Icop–0096
Vdx-6354rd vortex86dx pc/104 cpu module 34 c. Lvds flat panel support list if you would like to use lvds flat panel with vortex86sx / vortex86dx series, please contact our regional sales to get icop-0096 information or visit icop website: http://www.Icop.Com.Tw/pddetail.Aspx?Id=65&pid=4 icop–0096 : ...
Page 39: Hardware
Vdx-6354rd vortex86dx pc/104 cpu module 35 d. Flat panel wiring and lighting hardware before you connect the tft lcd flat panel with vortex86dx-6354rd, please make sure that the input voltage of lcd is + 3.3v or not bios please contact or e-mail our regional sales to get the special bios for the any...
Page 40
Vdx-6354rd vortex86dx pc/104 cpu module 36 e. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/dhcp, ftp server, sm...
Page 41
Vdx-6354rd vortex86dx pc/104 cpu module 37 f. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to load optim...
Page 42: Warranty
Vdx-6354rd vortex86dx pc/104 cpu module 38 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additi...