1. DL manuals
  2. ICOP Technology
  3. Computer Hardware
  4. VDX-6372RD
  5. User manual

ICOP Technology VDX-6372RD User manual

Manual is about: DM&P Vortex86DX 600MHz PC/104 CPU Module with 2S/2USB/VGA/LCD/GPIO/PWMx16 128MB DDR2 Onboard

Summary of VDX-6372RD

  • Page 1

    Vdx-6372rd/vdx-6372rd-plus dm&p vortex86dx 600mhz pc/104 cpu module with 2s/2usb/vga/lcd/gpio/pwmx16 128mb ddr2 onboard user’s manual (revision 1.1a).

  • Page 2

    Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current...

  • Page 3

    T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s ............................................................. Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list ............................................................ 1 1.2 product description ..........................

  • Page 4: This Page Is Blank

    This page is blank.

  • Page 5: C H A P T E R    1

    Vdx-6372rd vortex86dx pc/104 cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vdx-6372rd & vdx-6372rd-plus embedded vortex86dx cpu all-in-one board manual & drivers cd x 1 rs232 cable x 2 print cable x1 ide cable x 1 usb cable x 1 (usb port x 2 ) vga cable x 1 gpio cab...

  • Page 6

    Vdx-6372rd vortex86dx pc/104 cpu module 2 1.2 product description the vdx-6372rd family of low-power x86 embedded controller is designed to meet pc/104 specification, and integrated with the following features. 600 mhz vortex86dx soc vga, tft/ lvds lcd support up to 1280x1024 resolution 128mb ddr2 s...

  • Page 7: 1.3  Specifications

    Vdx-6372rd vortex86dx pc/104 cpu module 3 1.3 specifications features vdx-6372rd cpu dm&p soc cpu vortex86dx- 600mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache, l2 cache 128kb bios ami bios bus interface pc/104 standard compliant (optional: pci-104) system memory 1...

  • Page 8

    Vdx-6372rd vortex86dx pc/104 cpu module 4 pwm 16~24 channels power requirement single voltage +5v@ 600ma dimension 90 x 96mm (3.54 x 3.77 inches) weight 80g operating temperature -20 o c ~ +70 o c -40°c ~ +85°c (optional).

  • Page 9: 1.4    Board Dimension

    Vdx-6372rd vortex86dx pc/104 cpu module 5 1.4 board dimension.

  • Page 10: C H A P T E R 2

    Vdx-6372rd vortex86dx pc/104 cpu module 6 c h a p t e r 2 installation 2.1 board outline (note1: com2 rs232/422/485 is selected by bios setting) (note2: pci-104 connector is optional) (note3: vi/o default setting of pci-104 connector is +5v) (note4: redundancy signal and system-fail-sw are optional).

  • Page 11: Connectors

    Vdx-6372rd vortex86dx pc/104 cpu module 7 2.2 connectors & jumpers location connectors.

  • Page 12: Jumpers & Leds

    Vdx-6372rd vortex86dx pc/104 cpu module 8 jumpers & leds.

  • Page 13: Summary Table

    Vdx-6372rd vortex86dx pc/104 cpu module 9 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 ide box header, 2.0 ∅ ,22x2 44-pin j2 usb box header,2.0 ∅ , 5x2 10-pin j5 jtag wafer, 1.25 ∅ , 6x1 6-pin j6 reset pin header, 2,54 ∅ ,1x2 2-pin j7 redundancy (op...

  • Page 14: J1: Ide (44 Pins)

    Vdx-6372rd vortex86dx pc/104 cpu module 10 2.4 pin assignments & jumper settings j1: ide (44 pins) j2: usb pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd3- 4 lusbd2- 5 lusbd3+ 6 lusbd2+ 7 gnd 8 gnd 9 ggnd 10 ggnd pin # signal name pin # signal name 1 iderst 2 gnd 3 ided7 4 ided8 5 ided6 6 i...

  • Page 15: J5: Jtag

    Vdx-6372rd vortex86dx pc/104 cpu module 11 j5: jtag pin # signal name pin # signal name 1 vcc 2 gnd 3 tck 4 tdo 5 tdi 6 tms j6: reset pin # signal name pin # signal name 1 rst_sw 2 gnd j7: redundancy (optional) pin # signal name pin # signal name 1 gnd 2 sys-fail-out 3 sys-fail-in 4 gpcs0 5 sys-gpcs...

  • Page 16: J10: Ps/2 Mouse

    Vdx-6372rd vortex86dx pc/104 cpu module 12 j10: ps/2 mouse pin # signal name pin # signal name 1 msclk 2 msdata 3 nc 4 gnd 5 vcc j11: com 1 (optional: ttl/ gpio-p4 / pwmx8) pin # signal name pin # signal name 1 dcd1 2 rxd1 3 txd1 4 dtr1 5 gnd 6 dsr1 7 rts1 8 cts1 9 ri1 10 nc j12: com2 rs232 / 422 / ...

  • Page 17: J18: Print

    Vdx-6372rd vortex86dx pc/104 cpu module 13 j13: gpio (port 0 / 1/ pwmx16) j15: rs485 (auto direction) j16: power connector (terminal block 5.0mm) pin # signal name 1 +5v 2 gnd j18: print pin # signal name pin # signal name 1 stb- 14 afd- 2 pd0 15 err- 3 pd1 16 init- 4 pd2 17 slin- 5 pd3 18 gnd 6 pd4...

  • Page 18

    Vdx-6372rd vortex86dx pc/104 cpu module 14 7 pd5 20 gnd 8 pd6 21 gnd 9 pd7 22 gnd 10 ack- 23 gnd 11 busy 24 gnd 12 pe 25 gnd 13 slct 26 nc j20: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk * 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 1...

  • Page 19

    Vdx-6372rd vortex86dx pc/104 cpu module 15 59 sa1 60 osc 61 sa0 62 gnd 63 gnd 64 gnd j21: pc104 connector – 40pin pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16 * 4 sbhe * 5 iocs16 * 6 sa23 7 irq10 8 sa22 9 irq11 10 sa21 11 irq12 12 sa20 13 irq15 14 sa19 15 irq14 16 sa18 17 dack0 * 18 sa1...

  • Page 20: J23: Pc/104 + (Optional)

    Vdx-6372rd vortex86dx pc/104 cpu module 16 j23: pc/104 + (optional) vi/o default setting: +5v if you need to use vi/o as +3.3v, please see the page 19. Pin # a b c d 1 gnd nc +5v ad00 2 vi/o(+5v) ad02 ad01 +5v 3 ad05 gnd ad04 ad03 4 c/be0# ad07 gnd ad06 5 gnd ad09 ad08 gnd 6 ad11 vi/o(+5v) ad10 gnd ...

  • Page 21: R213

    Vdx-6372rd vortex86dx pc/104 cpu module 17 please remove the 0 ohm (1206 type) of r212 and add 0 ohm (1206 type) on r213.

  • Page 22: J24: Vga

    Vdx-6372rd vortex86dx pc/104 cpu module 18 j24: vga pin # signal name pin # signal name 1 r out 2 gnd 3 g out 4 gnd 5 b out 6 gnd 7 hsync 8 gnd 9 vsyncd 10 gnd j25: lcd (dvo) connector pin # signal name pin # signal name 1 +3.3v 2 +3.3v 3 lg2 4 lg3 5 lg4 6 lg5 7 nc 8 nc 9 lr0 10 lr1 11 lr2 12 lr3 13...

  • Page 23: 2.5

    Vdx-6372rd vortex86dx pc/104 cpu module 19 2.5 system mapping.

  • Page 24

    Vdx-6372rd vortex86dx pc/104 cpu module 20

  • Page 25

    Vdx-6372rd vortex86dx pc/104 cpu module 21.

  • Page 26: 2.6  Watchdog Timer

    Vdx-6372rd vortex86dx pc/104 cpu module 22 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux and wince ex...

  • Page 27

    Vdx-6372rd vortex86dx pc/104 cpu module 23 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We also offer do...

  • Page 28

    Vdx-6372rd vortex86dx pc/104 cpu module 24 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost many of us...

  • Page 29

    Vdx-6372rd vortex86dx pc/104 cpu module 25 2.9 pwm (pulse-width modulation) pulse-width modulation (pwm) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. The popular applic...

  • Page 30: Sd-1917

    Vdx-6372rd vortex86dx pc/104 cpu module 26 3.0 ide to sd (micro-sd) vortex86dx soc also built-in simulation circuit to adapt sd to ide in order to allow your system to recognize micro-sd card as c: or d: driver sd-1917: 44 pins ide to sd adapter is an ideal solution for industrial pc or embedded sys...

  • Page 31: C H A P T E R    3

    Vdx-6372rd vortex86dx pc/104 cpu module 27 c h a p t e r 3 driver installation vga thevortex86dx processor also use external display chip ““volari™ z9s” which is an ultra low powered graphics chipset with total power consumption at around 1-1.5 w. It is capable in providing vga display output upto 1...

  • Page 32: Appendix

    Vdx-6372rd vortex86dx pc/104 cpu module 28 appendix a. Tft flat panel data output.

  • Page 33: Size

    Vdx-6372rd vortex86dx pc/104 cpu module 29 b. Tft flat panel support list size brand resolution model no. 5.7” data image 320x240 fg050701dsswbg01 5.7” optrex 320x240 55264gd057j-fw-abn 5.7” toshiba 320x240 lta057a343f 5.7” sharp 320x240 (qvga / vga) lq057q3dc02 5.7” kyocera 320x240 (qvga / vga) tcg...

  • Page 34: Size

    Vdx-6372rd vortex86dx pc/104 cpu module 30 size brand resolution model no. 8” auo 800x600 (tft 24bits) a080sn01 v0 8.4” sharp 800x600 lq084s3dg01 10.4” pvi 640x480 pd104vt1/vt2 10.4” nec 640x480 nl6448ac33-18 10.4” nec 640x480 nl6448ac33-29 10.4” nec 640x480 nl6448bc33-59 10.4” sharp 640x480 lq104v1...

  • Page 35: Icop–0096

    Vdx-6372rd vortex86dx pc/104 cpu module 31 c. Lvds flat panel support list if you would like to use lvds flat panel with vortex86sx / vortex86dx series, please contact our regional sales to get icop-0096 information or visit icop website: http://www.Icop.Com.Tw/pddetail.Aspx?Id=65&pid=4 icop–0096 : ...

  • Page 36: Hardware

    Vdx-6372rd vortex86dx pc/104 cpu module 32 d. Flat panel wiring and lighting hardware before you connect the tft lcd flat panel with vortex86dx-6372rd, please make sure the input voltage of lcd is +3.3v or not bios please contact or e-mail our regional sales to get the special bios for the any tft l...

  • Page 37

    Vdx-6372rd vortex86dx pc/104 cpu module 33 e. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/dhcp, ftp server, sm...

  • Page 38

    Vdx-6372rd vortex86dx pc/104 cpu module 34 f. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to load optim...

  • Page 39: Warranty

    Vdx-6372rd vortex86dx pc/104 cpu module 35 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additi...