1. DL manuals
  2. ICOP Technology
  3. Processor
  4. Vega86-6247
  5. User manual

ICOP Technology Vega86-6247 User manual

Manual is about: VIA Mark CoreFusion 533MHz 3.5" CPU Module with 6S/3USB/VGA/LCD/LAN/Audio/CF 256MB SDRAM Onboard

Summary of Vega86-6247

  • Page 1

    Vega86-6247 via mark corefusion 533mhz 3.5" cpu module with 6s/3usb/vga/lcd/lan/audio/cf 256mb sdram onboard user’s manual (revision 1.0a).

  • Page 2

    Ii copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document. And makes no commitment to update or to keep cur...

  • Page 3

    Iii t a b l e o f c o n t e n t s t a b l e o f c o n t e n t s .............................................................Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list............................................................ 1 1.2 product description.........................

  • Page 4

    Iv this page is blank.

  • Page 5: C H A P T E R    1

    Vega86-6247 vega86™ 3.5" cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vega86-6247 embedded vega86 cpu all-in-one board manual & drivers cd x 1 rs232 cable x 5 printer cable x1 fdd cable x 1 ide cable x 1 (44pin to 40 pin) usb cable x 1 (usb port x 2 ) audio cable x...

  • Page 6: 1.2  Product Description

    Vega86-6247 vega86™ 3.5" cpu module 2 1.2 product description the vega86 single-board-computer series (powered by via mark corefusion processor) offers high performance, cost-effective and energy efficient processor with integrated prosavage4 sa graphics controller, which is the powerful embedded x8...

  • Page 7: 1.3 Specification

    Vega86-6247 vega86™ 3.5" cpu module 3 1.3 specification features vega86-6247 cpu via mark corefusion 533mhz chipset via vt82c686b bios ami bios system memory 256mb sdram onboard cache l1:64kb l2:64kb bus interface pc/104 standard compliant watchdog timer none vga integrated 2d/3d agp2x graphics with...

  • Page 8

    Vega86-6247 vega86™ 3.5" cpu module 4 flash disk support 44-pin ide flash disk( embeddisk 16mb or above) type i/ii cf card power requirement single voltage +5v @2.25a dimension 102 x 144mm (4.01 x 5.67 inches) weight 290g operating temperature -20 o c ~ +60 o c.

  • Page 9: 1.4 Board Dimension

    Vega86-6247 vega86™ 3.5" cpu module 5 1.4 board dimension unit: mm.

  • Page 10: C H A P T E R    2

    Vega86-6247 vega86™ 3.5" cpu module 6 c h a p t e r 2 installation 2.1 board outline.

  • Page 11

    Vega86-6247 vega86™ 3.5" cpu module 7 to guarantee the stability & maximum performance of original design, vega86-6247 must be used with the manufacturer designated passive heat sink shown as below photo..

  • Page 12: Solder Side

    Vega86-6247 vega86™ 3.5" cpu module 8 2.2 connectors & jumpers location solder side.

  • Page 13: Bottom Side

    Vega86-6247 vega86™ 3.5" cpu module 9 bottom side.

  • Page 14: Summary Table

    Vega86-6247 vega86™ 3.5" cpu module 10 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 fdd pin header, 2.0 ∅ ,17x2 10-pin j2 reset pin header, 2,54 ∅,1x2 2-pin j4 usb box header,2.0 ∅ , 5x2 10-pin j5 keyboard pin header, 2,54 ∅,1x5 5-pin j6 ps/2 keyboa...

  • Page 15

    Vega86-6247 vega86™ 3.5" cpu module 11 led 1 lan 1 link led ( yellow ) led-smd pwr_l ed power active led ide_le d ide link led sp1 buzzer s1 reset switch.

  • Page 16: J1: Fdd

    Vega86-6247 vega86™ 3.5" cpu module 12 2.4 pin assignments & jumper settings j1: fdd pin # signal name pin # signal name 34 dskchg\ 33 gnd 32 hdsel\ 31 gnd 30 rd\ 29 gnd 28 wp\ 27 gnd 26 tr0\ 25 gnd 24 wg\ 23 gnd 22 wd\ 21 gnd 20 step\ 19 gnd 18 dir\ 17 gnd 16 mtr1\ 15 gnd 14 ds0\ 13 gnd 12 ds1\ 11 ...

  • Page 17: J5: Keyboard

    Vega86-6247 vega86™ 3.5" cpu module 13 j5: keyboard pin # signal name pin # signal name 1 kbclk 2 kbdat 3 nc 4 gnd 5 +5v j6: ps/2 keyboard / mouse pin # signal name pin # signal name 1 kbclk 2 msclk 3 gnd 4 kbdat 5 irq12 6 +5v j7: lan pin # signal name pin # signal name 1 tx+ 2 tx- 3 rx+ 4 led0 5 le...

  • Page 18: J8: Lcd Connector

    Vega86-6247 vega86™ 3.5" cpu module 14 j8: lcd connector pin # signal name pin # signal name 1 lcdvcc 2 lcdvcc 3 fpd0 4 fpd1 5 fpd2 6 fpd3 7 fpd4 8 fpd5 9 fpd6 10 fpd7 11 fpd8 12 fpd9 13 fpd10 14 fpd11 15 fpd12 16 fpd13 17 fpd14 18 fpd15 19 fpd16 20 fpd17 21 fpd18 22 fpd19 23 fpd20 24 fpd21 25 fpd22...

  • Page 19: J10: Ide

    Vega86-6247 vega86™ 3.5" cpu module 15 j10: ide pin # signal name pin # signal name 1 pcirst- 2 gnd 3 ided7 4 ided8 5 ided6 6 ided9 7 ided5 8 ided10 9 ided4 10 ided11 11 ided3 12 ided12 13 ided2 14 ided13 15 ided1 16 ided14 17 ided0 18 ided15 19 gnd 20 nc 21 idereq 22 gnd 23 ideiow- 24 gnd 25 ideior...

  • Page 20: J13: Power Connector

    Vega86-6247 vega86™ 3.5" cpu module 16 j13: power connector pin # signal name 1 5v 2 gnd j14: fan pin # signal name 1 5v 2 gnd j15: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk * 2 gnd 3 sd7 4 resetdrv 5 sd6 6 +5v 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd...

  • Page 21

    Vega86-6247 vega86™ 3.5" cpu module 17 47 sa7 48 irq4 49 sa6 50 irq3 51 sa5 52 dack2 * 53 sa4 54 tc 55 sa3 56 bale 57 sa2 58 +5v 59 sa1 60 osc 61 sa0 62 gnd 63 gnd 64 gnd j16: 4p power source (interconnect to pc/104 - j15) pin # signal name 1 +12v 2 -12v 3 -5v 4 gnd j17: pc104 connector – 40pin pin ...

  • Page 22: J18: Com 1

    Vega86-6247 vega86™ 3.5" cpu module 18 j18: com 1 pin # signal name pin # signal name 1 dcd1 2 rxd1 3 txd1 4 dtr1 5 gnd 6 dsr1 7 rts1 8 cts1 9 ri1 10-11 ggnd j19: print pin # signal name pin # signal name 1 stb- 2 pd0 3 pd1 4 pd2 5 pd3 6 pd4 7 pd5 8 pd6 9 pd7 10 ack- 11 busy 12 pe 13 slct 14 afd- 15...

  • Page 23: J21: Com2

    Vega86-6247 vega86™ 3.5" cpu module 19 j21: com2 pin # signal name pin # signal name 1 dcd2 2 rxd2 3 txd2 4 dtr2 5 gnd 6 dsr2 7 rts2 8 cts2 9 ri2 10 vcc j22: rs485 (auto direction) pin # signal name 1 rs485+ 2 rs485- 3 gnd j23: com3 pin # signal name pin # signal name 1 dcd3 2 rxd3 3 txd3 4 dtr3 5 g...

  • Page 24: J25: Com5

    Vega86-6247 vega86™ 3.5" cpu module 20 j25: com5 pin # signal name pin # signal name 1 dcd5 2 rxd5 3 txd5 4 dtr5 5 gnd 6 dsr5 7 rts5 8 cts5 9 ri5 10 vcc j26: com6 pin # signal name pin # signal name 1 dcd6 2 rxd6 3 txd6 4 dtr6 5 gnd 6 dsr6 7 rts6 8 cts6 9 ri6 10 vcc j27: line out pin # signal name 1...

  • Page 25: J29: Line In

    Vega86-6247 vega86™ 3.5" cpu module 21 j29: line in pin # signal name 1 linein_r 2 gnd 3 gnd 4 linein_l j30: usb pin # signal name pin # signal name 1 vcc 2 vcc 3 -data1 4 -data0 5 +data1 6 +data0 7 gnd 8 gnd 9 gnd 10 gnd.

  • Page 26: 2.5 System

    Vega86-6247 vega86™ 3.5" cpu module 22 2.5 system mapping.

  • Page 27

    Vega86-6247 vega86™ 3.5" cpu module 23.

  • Page 28: Driver Installation

    Vega86-6247 vega86™ 3.5" cpu module 24 c h a p t e r 3 driver installation vga the mark corefusion processor also integrates s3 graphics’ 128-bit prosavage4 graphics accelerator that brings mainstream graphics performance to the value pc with leading-edge 2d, 3d and dvd video acceleration into a cos...

  • Page 29: Appendix

    Vega86-6247 vega86™ 3.5" cpu module 25 appendix a. Stn flat panel data output.

  • Page 30

    Vega86-6247 vega86™ 3.5" cpu module 26 b. Tft flat panel data output.

  • Page 31: C. Flat Panel Bios Setting

    Vega86-6247 vega86™ 3.5" cpu module 27 c. Flat panel bios setting the vega86-6247 offers the bios setting for the various lcd flat panel support. Before you connect the lcd flat panel to cpu board, please go to biosÆenter “the pci /plug and play setup” Æ adjust “boot screen” from “auto “to “both crt...

  • Page 32: Lcd Panel Type

    Vega86-6247 vega86™ 3.5" cpu module 28 lcd panel type function 0 640x480 tft at 24mhz (18bit,24bit) 1 800x600 tft (for some special panel use) 2 1024x768 tft 2 pixel / clk at 32mhz (36bit) 3 1280x1024 tft 2 pixel / clk at 81mhz (24bit) 4 640x480 dstn at 25mhz (16bit) 5 800x600 dstn at 40mhz (16bit) ...

  • Page 33

    Vega86-6247 vega86™ 3.5" cpu module 29 d. Flat panel wiring and lighting before you connect the lcd flat panel with vega86-6247, please make sure that the lcd flat panel use 3.3v or 5v, then place the j9 ( see page 14) on the correct position. For the wiring, please refer to page 14(j8: lcd connecto...

  • Page 34: Warranty

    Vega86-6247 vega86™ 3.5" cpu module 30 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional...