- DL manuals
- ICOP Technology
- Computer Hardware
- VSX-6150E-V2
- User manual
ICOP Technology VSX-6150E-V2 User manual
Summary of VSX-6150E-V2
Page 1
Vsx-6150e-v2 / vsx-6150e-v2-plus dm&p vortex86sx 300mhz pc/104 cpu module with 4s/2usb/lan/gpio 128mb ddr2 onboard user’s manual (revision 1.1a).
Page 2: Copyright
Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document. And makes no commitment to update or to keep curren...
Page 3
T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s .............................................................Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list............................................................ 1 1.2 product description.............................
Page 4: C H A P T E R 1
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vsx-6150e-v2 & vsx-6150e-v2-plus embedded vortex86sx cpu all-in-one board manual & drivers cd x 1 rs232 cable x 4 print cable x1 ide cable x 1 usb cable x 1 (usb port x 2 ) lan cab...
Page 5: 1.2 Product Description
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 2 1.2 product description the vsx-6150e-v2 family of low-power x86 embedded controller is designed to meet pc/104 specification, and integrated with the following features. 300 mhz vortex86sx system-on-chip 128 / 256mb ddr2 system memory enhanced id...
Page 6: 1.3 Specifications
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 3 1.3 specifications features vsx-6150e-v2 cpu dm&p soc cpu vortex86sx- 300mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache bios ami bios bus interface pc/104 standard compliant (optional: pci-104) system memory 128 ...
Page 7: 1.4 Board Dimension
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 4 1.4 board dimension.
Page 8: C H A P T E R 2
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 5 c h a p t e r 2 installation 2.1 board outline (note1: com2 rs232/485 is selected by bios setting) (note2: pci-104 connector is optional) (note3: vi/o default setting of pci-104 connector is +5v) (note4: vsx-6150e-v2-256 is optional) (note5: redun...
Page 9: Connectors
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 6 2.2 connectors & jumpers location connectors (note1: j7 /j8 /j23 are optional).
Page 10: Jumpers & Leds
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 7 jumpers & leds.
Page 11: Summary Table
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 8 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 ide box header, 2.0 ∅ ,22x2 44-pin j2 usb box header,2.0 ∅ , 5x2 10-pin j4 lan pin header, 2.0 ∅ , 4x2 8-pin j5 jtag wafer, 1.25 ∅ , 6x1 6-pin j6 reset...
Page 12: J1: Ide (44 Pins)
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 9 2.4 pin assignments & jumper settings j1: ide (44 pins) j2: usb pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd3- 4 lusbd2- 5 lusbd3+ 6 lusbd2+ 7 gnd 8 gnd 9 ggnd 10 ggnd pin # signal name pin # signal name 1 iderst 2 gnd 3 ided7 4 ided8 5...
Page 13: J4: Lan
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 10 j4: lan pin # signal name pin # signal name 1 atx+ 2 atx- 3 arx+ 4 led0 5 led0+ 6 arx- 7 led1+ 8 led1 j5: jtag pin # signal name pin # signal name 1 vcc 2 gnd 3 tck 4 tdo 5 tdi 6 tms j6: reset pin # signal name pin # signal name 1 rst_sw 2 gnd j7...
Page 14: J9: Ps/2 Keyboard
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 11 j9: ps/2 keyboard pin # signal name pin # signal name 1 kbclk 2 kbdat 3 nc 4 gnd 5 vcc j10: ps/2 mouse pin # signal name pin # signal name 1 msclk 2 msdata 3 nc 4 gnd 5 vcc j11: com 1 (optional: ttl/ gpio-p4) pin # signal name pin # signal name 1...
Page 15: J13: Gpio (Port 0 / 1)
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 12 j13: gpio (port 0 / 1) j15: rs485 (auto direction) j16: power connector (terminal block 5.0mm) pin # signal name 1 +5v 2 gnd j17: com3 (optional: ttl) pin # signal name pin # signal name 1 dcd3 2 rxd3 3 txd3 4 dtr3 5 gnd 6 dsr3 7 rts3 8 cts3 9 ri...
Page 16: J18: Print
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 13 j18: print pin # signal name pin # signal name 1 stb- 14 afd- 2 pd0 15 err- 3 pd1 16 init- 4 pd2 17 slin- 5 pd3 18 gnd 6 pd4 19 gnd 7 pd5 20 gnd 8 pd6 21 gnd 9 pd7 22 gnd 10 ack- 23 gnd 11 busy 24 gnd 12 pe 25 gnd 13 slct 26 nc j19: com4 (optiona...
Page 17
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 14 j20: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk * 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd1 16 ows 17 sd0 18 +12v 19 iochrdy 20 gnd 21 aen 22 smemw * 23 sa19 24 sm...
Page 18
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 15 j21: pc104 connector – 40pin j22: 4p power source (interconnect to pc/104 – j20) pin # signal name 1 -5v 2 -12v 3 +12v 4 gnd pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16 * 4 sbhe * 5 iocs16 * 6 sa23 7 irq10 8 sa22 9 irq11 10 sa21 11 ...
Page 19: J23: Pc/104 + (Optional)
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 16 j23: pc/104 + (optional) vi/o default setting: +5v if you need to use vi/o as +3.3v, please see the page 19. Pin # a b c d 1 gnd nc +5v ad00 2 vi/o(+5v) ad02 ad01 +5v 3 ad05 gnd ad04 ad03 4 c/be0# ad07 gnd ad06 5 gnd ad09 ad08 gnd 6 ad11 vi/o(+5v...
Page 20: R213
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 17 please remove the 0 ohm (1206 type) of r212 and add 0 ohm (1206 type) on r213.
Page 21: 2.5
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 18 2.5 system mapping.
Page 22
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 19.
Page 23
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 20
Page 24: 2.6 Watchdog
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 21 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux a...
Page 25: 2.7 Gpio
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 22 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We al...
Page 26
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 23 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost...
Page 27: C H A P T E R 3
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 24 c h a p t e r 3 driver installation vga thevortex86sx processor also use external display chip ““volari™ z9s” which is an ultra low powered graphics chipset with total power consumption at around 1-1.5 w. It is capable in providing vga display ou...
Page 28: Appendix
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 25 appendix a. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/...
Page 29: B. Bios Default Setting
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 26 b. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to...
Page 30: Warranty
Vortex86sx-6150e-v2 vortex86sx ™ pc/104 cpu module 27 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it a...