1. DL manuals
  2. Icop
  3. Motherboard
  4. VDX-6300RD
  5. User Manual

Icop VDX-6300RD User Manual

Manual is about: DM&P Vortex86DX 800MHz DIP 68pin CPU Module with (3x TX/ RX Only)/2USB/LAN/2GPIO/CF/PWMx24 256MB DDR2 Onboard

Summary of VDX-6300RD

  • Page 1

    Vdx-6300rd vsx-6100-evb (evaluation board) dm&p vortex86dx 800mhz dip 68pin cpu module with (3x tx/ rx only)/2usb/lan/2gpio/cf/pwmx24 256mb ddr2 onboard user’s manual (revision 1.1a).

  • Page 2

    Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current...

  • Page 3

    T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s ............................................................. Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list ............................................................ 1 1.2 product description ..........................

  • Page 4: This Page Is Blank

    This page is blank.

  • Page 5: C H A P T E R    1

    Vdx-6300rd vortex86dx dip 68pin cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vdx-6300rd embedded vortex86dx dip 68 pin cpu module rs232 cable x 3 usb cable x 1 ps/2 keyboard cable x 1 product name package vsx-6100-evb embedded vortex86sx/dx dip 68pin cpu module eva...

  • Page 6: 1.2 Product Description

    Vdx-6300rd vortex86dx dip 68pin cpu module 2 1.2 product description the vdx-6300rd family of low-power x86 embedded controller is designed to meet dip 68pin cpu module specification, and integrated with the following features. 800mhz vortex86dx system-on-chip 256mb ddr2 system memory 10/100mbps eth...

  • Page 7: 1.3  Specifications

    Vdx-6300rd vortex86dx dip 68pin cpu module 3 1.3 specifications features vsx-6100-evb (evaluation board) connectors 2.00mm ∅ 10-pin header for rs-232 x1 2.54mm ∅ 10-pin header for pw m x1 2.54mm ∅ 10-pin header for gpio x3 2.54mm ∅ 3-pin header for servo x8 2.54mm ∅ 34-pin connector for multi-i/o x1...

  • Page 8

    Vdx-6300rd vortex86dx dip 68pin cpu module 4 features vdx-6300rd cpu dm&p soc cpu vortex86dx- 800mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache l2:128kb cache bios ami bios system memory 256 /512mb ddr2 onboard watchdog timer software programmable from 30.5 us to 5...

  • Page 9

    Vdx-6300rd vortex86dx dip 68pin cpu module 5 1.4 board dimension vsx-6100-evb (evaluation board).

  • Page 10: Vdx-6300Rd

    Vdx-6300rd vortex86dx dip 68pin cpu module 6 vdx-6300rd.

  • Page 11: Installation

    Vdx-6300rd vortex86dx dip 68pin cpu module 7 c h a p t e r 2 installation 2.1 board outline vdx-6300rd.

  • Page 12

    Vdx-6300rd vortex86dx dip 68pin cpu module 8 2.2 connectors & jumpers location vsx-6100-evb (evaluation board).

  • Page 13: Vdx-6300Rd

    Vdx-6300rd vortex86dx dip 68pin cpu module 9 vdx-6300rd.

  • Page 14: Summary Table

    Vdx-6300rd vortex86dx dip 68pin cpu module 10 2.3 connectors & jumpers summary vsx-6100-evb (evaluation board) summary table nbr description type of connections pin nbrs. J1 10/100base-t ethernet lan rj45 connector 8-pin j2 gpio port 0 / 1 pin header, 2.54 ∅ ,10x2 20-pin j3 usb 2 usb connector 6-pin...

  • Page 15: Vdx-6300Rd

    Vdx-6300rd vortex86dx dip 68pin cpu module 11 vdx-6300rd summary table nbr description type of connections pin nbrs. J2 usb wafer, 1.25 ∅ , 5x1 5-pin j3 ps/2 keyboard wafer, 1.25 ∅ , 5x1 4-pin j4 jtag wafer, 1.25 ∅ , 6x1 6-pin j5 com3 wafer, 1.25 ∅ , 3x1 3-pin j6 com4 wafer, 1.25 ∅ , 3x1 3-pin j8 co...

  • Page 16: J4: Timer Counter (Com2)

    Vdx-6300rd vortex86dx dip 68pin cpu module 12 2.4 pin assignments & jumper settings a: pin assignments & jumper settings of vsx-6100-evb j2: gpio (port 0 / port 1) j4: timer counter (com2) pin # signal name pin # signal name 1 gnd 2 vcc 3 gp00 4 gp10 5 gp01 6 gp11 7 gp02 8 gp12 9 gp03 10 gp13 11 gp0...

  • Page 17: J6: Servo1

    Vdx-6300rd vortex86dx dip 68pin cpu module 13 j6: servo1 pin # signal name 1 gnd 2 vdd 3 p20 j7:rs232 / ttl select (com1) pin # signal name open com1 rs232 close com1 ttl / port4 j8: servo2 pin # signal name 1 gnd 2 vdd 3 p21 j9: servo3 pin # signal name 1 gnd 2 vdd 3 p22.

  • Page 18: J10: Com 1

    Vdx-6300rd vortex86dx dip 68pin cpu module 14 j10: com 1 pin # signal name pin # signal name 1 dcd1 2 rxd1 3 txd1 4 dtr1 5 gnd 6 dsr1 7 rts1 8 cts1 9 ri1 10 gnd 11 gnd j11: servo4 pin # signal name 1 gnd 2 vdd 3 p23 j12: system power connector (terminal block 5.0mm) pin # signal name 1 dc in : +6v~+...

  • Page 19: J16: Servo7

    Vdx-6300rd vortex86dx dip 68pin cpu module 15 j16: servo7 pin # signal name 1 gnd 2 vdd 3 p26 j17: servo power connector (terminal block 5.0mm) pin # signal name 1 vdd 2 gnd j18: servo8 pin # signal name 1 gnd 2 vdd 3 p27 j19: irq6 selection pin # signal name 1 gnd 2 irq6.

  • Page 20

    Vdx-6300rd vortex86dx dip 68pin cpu module 16 u1: dip-68 connector – 68pin pin # signal name pin # signal name 1 gnd 35 gnd 2 reset 36 txden2 3 gp00/pwm0 37 cts2\ 4 gp01/pwm1 38 dsr2\ 5 gp02/pwm2 39 dtr2\ 6 gp03/pwm3 40 rxd2\ 7 gp04/pwm4 41 ri2 8 gp05/pwm5 42 rts2 9 gp06/pwm6 43 txd2 10 gp07/pwm7 44...

  • Page 21: J2: Usb

    Vdx-6300rd vortex86dx dip 68pin cpu module 17 b: pin assignments & jumper settings of vdx-6300rd j2: usb pin # signal name pin # signal name 1 vcc 2 lusbd0- 3 lusbd0+ 4 gnd 5 gnd j3: ps/2 keyboard pin # signal name pin # signal name 1 kbclk 2 kbdat 3 gnd 4 vcc j4: jtag pin # signal name pin # signal...

  • Page 22: J5: Com3

    Vdx-6300rd vortex86dx dip 68pin cpu module 18 j5: com3 pin # signal name pin # signal name 1 txd3 2 rxd3 3 gnd j6: com4 pin # signal name pin # signal name 1 txd4 2 rxd4 3 gnd j7: com9 pin # signal name pin # signal name 1 txd9 2 rxd9 3 gnd j8: slide switch (console redirection) pin # signal name pi...

  • Page 23

    Vdx-6300rd vortex86dx dip 68pin cpu module 19 u5: dip-68 connector – 68pin pin # signal name pin # signal name 1 gnd 35 gnd 2 pwrgnd 36 txden2 3 gp00/pwm0 37 cts2\ 4 gp01/pwm1 38 dsr2\ 5 gp02/pwm2 39 dtr2\ 6 gp03/pwm3 40 rxd2\ 7 gp04/pwm4 41 ri2 8 gp05/pwm5 42 rts2 9 gp06/pwm6 43 txd2 10 gp07/pwm7 4...

  • Page 24: 2.5

    Vdx-6300rd vortex86dx dip 68pin cpu module 20 2.5 system mapping.

  • Page 25

    Vdx-6300rd vortex86dx dip 68pin cpu module 21.

  • Page 26

    Vdx-6300rd vortex86dx dip 68pin cpu module 22.

  • Page 27: 2.6  Watchdog Timer

    Vdx-6300rd vortex86dx dip 68pin cpu module 23 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux and wince...

  • Page 28

    Vdx-6300rd vortex86dx dip 68pin cpu module 24 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We also offer...

  • Page 29

    Vdx-6300rd vortex86dx dip 68pin cpu module 25 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost many of...

  • Page 30

    Vdx-6300rd vortex86dx dip 68pin cpu module 26 2.9 pwm (pulse-width modulation) pulse-width modulation (pwm) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. The popular app...

  • Page 31: Driver Installation

    Vdx-6300rd vortex86dx dip 68pin cpu module 27 c h a p t e r 3 driver installation lan the vortex86dx processor also integrated 10/100mbps ethernet controller that supports both 10/100base-t and allows direct connection to your 10/100mbps ethernet based local area network for full interaction with lo...

  • Page 32: Appendix

    Vdx-6300rd vortex86dx dip 68pin cpu module 28 appendix a. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/dhcp, ft...

  • Page 33: B. Bios Default Setting

    Vdx-6300rd vortex86dx dip 68pin cpu module 29 b. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to load op...

  • Page 34

    Vdx-6300rd vortex86dx dip 68pin cpu module 30 c. Console redirection setting hardware requirement: 1. Vdx-6300rd & vsx-6100-evb (evaluation board) 2. Any pc with com port, which installed windows xp ( or other windows os) with hyper terminal 3. A d-sub 9 pin female to female cable. Enable console re...

  • Page 35

    Vdx-6300rd vortex86dx dip 68pin cpu module 31.

  • Page 36

    Vdx-6300rd vortex86dx dip 68pin cpu module 32.

  • Page 37

    Vdx-6300rd vortex86dx dip 68pin cpu module 33.

  • Page 38

    Vdx-6300rd vortex86dx dip 68pin cpu module 34.

  • Page 39

    Vdx-6300rd vortex86dx dip 68pin cpu module 35 d. Vsx-6100-evb (evaluation board) schematic schematic information can help baseboard designer to optimize exactly how each of these functions implements physically. Designer can place connectors precisely where needed for the application on a baseboard ...

  • Page 40: Warranty

    Vdx-6300rd vortex86dx dip 68pin cpu module 36 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no add...