1. DL manuals
  2. Icop
  3. Computer Hardware
  4. VDX2-6526
  5. User Manual

Icop VDX2-6526 User Manual

Manual is about: DM&P Vortex86DX2 800MHz 3.5” CPU Module with 4S/4USB/VGA/LCD/LVDS/AUDIO/3LAN/GPIO/PWMx16 512MB/1GB DDR2 Onboard

Summary of VDX2-6526

  • Page 2: Vdx2-6526

    Vdx2-6526 dm&p vortex86dx2 800mhz 3.5” cpu module with 4s/4usb/vga/lcd/lvds/audio/ 3lan/gpio/pwmx16 512mb/1gb ddr2 onboard user’s manual (revision 1.3a).

  • Page 3

    Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update or to keep current...

  • Page 4

    T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s ............................................................. Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list ............................................................ 1 1.2 ordering information .........................

  • Page 5: This Page Is Blank

    This page is blank.

  • Page 6: C H A P T E R    1

    Vortex86dx2-6526 vortex86dx2 pc/104 cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package som304d2-6526 vortex86dx2 base board rs232 cable x 4 printer cable x1 usb cable x 2 (usb port x 3 ) vga cable x 1 lan cable x 2 gpio cable x 1 audio line x2 screw kit x 1 som304d2 cpu ...

  • Page 7

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 2 1.3 product description the vdx2-6526 family of low-power x86 embedded controller is designed to meet 3.5” specification, and integrated with the following features. 800 mhz vortex86dx2 soc vga, tft/ lvds lcd support up to 1280x1024 resolution 512mb/ 1g...

  • Page 8: 1.4    Specifications

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 3 1.4 specifications features vdx2-6526 cpu dm&p soc cpu vortex86dx2- 800mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache l2:256kb cache bios ami bios bus interface pc/104 standard compliant system memory 512mb/ 1 gb ddr2 ...

  • Page 9

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 4 flash disk support onboard 4mb spi flash disk (driver: a) pwm 16 channels power requirement single voltage +5v@1a dimension 102 x 146mm (4.01 x 5.75 inches) weight 150g operating temperature -10 o c ~ +60 o c -40 o c ~ +85 o c (optional) operating syste...

  • Page 10: 1.5    Board Dimension

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 5 1.5 board dimension.

  • Page 11: Installation

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 6 c h a p t e r 2 installation 2.1 board outline note: 1. Com rs232/485 is selected by bios setting. 2. Usb4 hot swap is optional. Usb4 has no function if hot swap is not selected. 3. Touchscreen is optional. No onboard spi rom and ps/2 mouse functions if...

  • Page 12: Connectors

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 7 2.2 connectors location connectors.

  • Page 13: Summary Table

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 8 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 lcd box header, 2.0 ∅ , 22x2 44-pin j2 24-bit lvds pin header, 2.0 ∅ , 10x2 20-pin j3 vga pin header, 2.0 ∅ , 5x2 10-pin j4 sata dom sata 7p connector, 7x1 7...

  • Page 14: J1: Lcd (Dvo) Connector

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 9 2.4 pin assignments & jumper settings j1: lcd (dvo) connector pin # signal name pin # signal name 1 +3.3v 2 +3.3v 3 lg2 4 lg3 5 lg4 6 lg5 7 nc 8 nc 9 lr0 10 lr1 11 lr2 12 lr3 13 lr4 14 lr5 15 gnd 16 nc 17 nc 18 nc 19 nc 20 gnd 21 nc 22 nc 23 lb0 24 lb1 ...

  • Page 15: J3: Vga

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 10 j2: lvds (24-bit support only) pin # signal name pin # signal name 1 vcc3(+3.3v) 2 vcc3(+3.3v) 3 gnd 4 gnd 5 rxin0+ 6 rxin0- 7 rxin1- 8 gnd 9 gnd 10 rxin1+ 11 rxin2+ 12 rxin2- 13 ckin- 14 gnd 15 gnd 16 ckin+ 17 rxin3- 18 gnd 19 gnd 20 rxin3+ j3: vga pi...

  • Page 16: J7: Reset

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 11 j7: reset pin # signal name pin # signal name 1 rst_sw 2 gnd j8: gpio (port 0/1 / pwmx16) j9: lan1 (rj45) pin # signal name pin # signal name 1 gtx+ 2 gtx- 3 grx+ 4 gtxc+ 5 gtxc- 6 grx- 7 grxd+ 8 grxd- j10: lan2 pin # signal name pin # signal name 1 at...

  • Page 17: J12: Usb2 (Usb Type A)

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 12 j12: usb2 (usb type a) pin # signal name pin # signal name 1 vcc 2 lusbd2- 3 lusbd2+ 4 gnd 5 ggnd 6 ggnd 7 ggnd 8 ggnd j13: usb0&1 pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd0- 4 lusbd1- 5 lusbd0+ 6 lusbd1+ 7 gnd 8 gnd 9 ggnd 10 ggnd j14: u...

  • Page 18

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 13 j17: com2 rs232 / 485 (optional: ttl / gpio-p5) pin # signal name pin # signal name 1 dcd2 / 2rs485- 2 rxd2 / 2rs485+ 3 txd2 4 dtr2 5 gnd 6 dsr2 7 rts2 8 cts2 9 ri2 10 nc j18: com3 rs232 / 485 (optional: ttl / gpio-p6) pin # signal name pin # signal na...

  • Page 19

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 14 j20a: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk* 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd1 16 ows 17 sd0 18 +12v 19 iochrdy 20 gnd 21 aen 22 smemw* 23 sa19 24 smemr* 25...

  • Page 20: J23: Line Out

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 15 j20b: pc104 connector – 40pin j21: 4p power source (interconnect to pc/104 – j20) pin # signal name 1 -5v 2 -12v 3 +12v 4 gnd j23: line out pin # signal name 1 loutr 2 gnd 3 gnd 4 loutl pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16* 4 sbhe ...

  • Page 21: J24: Mic-In

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 16 j24: mic-in pin # signal name 1 micvref 2 gnd 3 gnd 4 mic-in j25: touch screen (optional) pin # signal name 1 y- 2 x- 3 y+ 4 x+ *no onboard spi rom if touch screen function is selected j26: print pin # signal name pin # signal name 1 stb- 14 afd- 2 pd0...

  • Page 22: 2.5

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 17 2.5 system mapping.

  • Page 23

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 18.

  • Page 24

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 19.

  • Page 25

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 20

  • Page 26

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 21.

  • Page 27: 2.6  Watchdog Timer

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 22 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx/dx2 cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux and...

  • Page 28

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 23 2.7 gpio (general purpose input / output) 20 gpio pins (16 channels without acc and ground) are provided by the vortex86dx2 for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-...

  • Page 29

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 24 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system cost many ...

  • Page 30

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 25 2.9 pwm (pulse-width modulation) pulse-width modulation (pwm) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load. The popular a...

  • Page 31: Driver Installation

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 26 c h a p t e r 3 driver installation vga thevortex86dx2 processor integrated a 2d vga chip within. It is capable in providing vga display resolution up to 1280x1024 and also supports tft/ lvds flat panel resolution up to 1024x768 while share system memo...

  • Page 32: Appendix

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 27 appendix a. Tft flat panel data output.

  • Page 33: Size

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 28 b. Tft flat panel support list size brand resolution model no. 3.5” planar 160x120 el320.240.36-hb 5.7” planar 320x240 el160.120.39 5.7” toshiba 320x240 lta057a343f 5.7” sharp 320x240 (qvga/vga) lq057q3dc02 5.7” data image 640x480 fg050710dsswjg01/dg01...

  • Page 34: Hardware

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 29 c. Flat panel wiring and lighting hardware before you connect tft lcd flat panel with vdx2-6526, please make sure if the input voltage of lcd is + 3.3v or not. Bios please contact or e-mail our regional sales to get special bios for any tft lcd flat pa...

  • Page 35

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 30 d. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: bootp/dhcp, ftp serve...

  • Page 36

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 31 e. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” to load ...

  • Page 37: Warranty

    Vortex86dx2-6526 vortex86dx2 3.5” cpu module 32 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no a...