1. DL manuals
  2. Icop
  3. Motherboard
  4. VSX-6121-V2
  5. User Manual

Icop VSX-6121-V2 User Manual

Summary of VSX-6121-V2

  • Page 1

    Full 16-bit isa bus vsx-6121-v2 dm&p vortex86sx 300mhz half-size cpu module with 2s/4usb/gpio 128mb ddr2 onboard user’s manual (revision 1.0a) http://www.Microcomputersystems.Com.

  • Page 2

    Copyright the information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document. And makes no commitment to update or to keep curren...

  • Page 3

    T a b l e o f c o n t e n t s t a b l e o f c o n t e n t s .............................................................Iii c h a p t e r 1 introduction……………………………………………1 1.1 packing list............................................................ 1 1.2 product description.............................

  • Page 4: C H A P T E R    1

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 1 c h a p t e r 1 introduction 1.1 packing list product name package vsx-6121-v2 embedded vortex86sx cpu all-in-one board manual & drivers cd x 1 rs232 cable x 1 print cable x1 ide cable x 1 usb cable x 2 (usb port x 2 ) gpio cable x 1 ykb for ps/...

  • Page 5: 1.2  Product Description

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 2 1.2 product description the vsx-6121-v2 family of low-power x86 embedded controller is designed to meet half-size specification with full 16-bit isa bus, and integrated with the following features. 300mhz vortex86sx system-on-chip 128/ 256mb ddr...

  • Page 6: 1.3  Specifications

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 3 1.3 specifications features vsx-6121-v2 cpu dm&p soc cpu vortex86sx- 300mhz real time clock with lithium battery backup cache l1:16k i-cache, 16k d-cache bios ami bios bus interface pc/104 standard compliant (optional: pci-104) system memory 128...

  • Page 7

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 4 flash disk support on board 2mb spi flash disk (driver: a) 44-pin ide flash disk( embeddisk 16mb or above) compact flash type i/ii (optional) sram support 512kb (optional) power requirement single voltage +5v @ 340ma dimension 184mm x 122mm (7.2...

  • Page 8: 1.4  Board Dimension

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 5 1.4 board dimension.

  • Page 9: Installation

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 6 c h a p t e r 2 installation 2.1 board outline (note1: com2 rs232/422/485 is selected by bios setting) (note2: j39 default setting of jtag has to be disable: pin 1 & pin 2 short) (note3: pci-104 connector is optional: vi/o setting: +5v only) (no...

  • Page 10: Connectors

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 7 2.2 connectors & jumpers location connectors.

  • Page 11: Jumpers & Leds

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 8 jumpers & leds.

  • Page 12: Summary Table

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 9 2.3 connectors & jumpers summary summary table nbr description type of connections pin nbrs. J1 ide box header, 2.0 ∅ , 22x2 44-pin j2 usb1 box header, 2.54 ∅ , 5x2 10-pin j3 usb2 box header, 2.54 ∅ , 5x2 10-pin j4 jtag wafer, 1.25 ∅ , 6x1 6-pin...

  • Page 13: J1: Ide (44 Pins)

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 10 2.4 pin assignments & jumper settings j1: ide (44 pins) j2: usb 1 pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd0- 4 lusbd1- 5 lusbd0+ 6 lusbd1+ 7 gnd 8 gnd 9 ggnd 10 ggnd pin # signal name pin # signal name 1 iderst 2 gnd 3 ided7 4 id...

  • Page 14: J3: Usb 2

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 11 j3: usb 2 pin # signal name pin # signal name 1 vcc 2 vcc 3 lusbd2- 4 lusbd3- 5 lusbd2+ 6 lusbd3+ 7 gnd 8 gnd 9 ggnd 10 ggnd j4: jtag pin # signal name pin # signal name 1 vcc 2 gnd 3 tck 4 tdo 5 tdi 6 tms j5: reset pin # signal name pin # sign...

  • Page 15: J8: Ps/2 Kbd / Mouse

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 12 j8: ps/2 kbd / mouse pin # signal name pin # signal name 1 kbclk 2 msclk 3 gnd 4 kbdat 5 msdat 6 vcc 7 gnd 8 gnd 9 gnd j9: com 1 (optional: ttl) pin # signal name pin # signal name 1 dcd1 2 rxd1 3 txd1 4 dtr1 5 gnd 6 dsr1 7 rts1 8 cts1 9 ri1 10...

  • Page 16: J11: Gpio (Port 0 / Port 1)

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 13 j11: gpio (port 0 / port 1) j12: rs485 (auto direction) j17: power connector – 4-pin header (p4 molex 5mm) pin # signal name 1 +5v 2 gnd 3 gnd 4 +12v pin # signal name pin # signal name 1 gnd 2 vcc 3 gp00 4 gp10 5 gp01 6 gp11 7 gp02 8 gp12 9 gp...

  • Page 17: J20: Print

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 14 j18: power connector (terminal block 5.0mm) pin # signal name 1 +5v 2 gnd j20: print pin # signal name pin # signal name 1 stb- 14 afd- 2 pd0 15 err- 3 pd1 16 init- 4 pd2 17 slin- 5 pd3 18 gnd 6 pd4 19 gnd 7 pd5 20 gnd 8 pd6 21 gnd 9 pd7 22 gnd...

  • Page 18

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 15 j22: pc104 connector – 64pin pin # signal name pin # signal name 1 iochchk * 2 gnd 3 sd7 4 resetdrv 5 sd6 6 vcc 7 sd5 8 irq9 9 sd4 10 -5v 11 sd3 12 drq2 13 sd2 14 -12v 15 sd1 16 ows 17 sd0 18 +12v 19 iochrdy 20 gnd 21 aen 22 smemw * 23 sa19 24 ...

  • Page 19

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 16 j24: pc104 connector – 40pin j26: 4p power source (interconnect to pc/104 – j22) pin # signal name 1 -5v 2 -12v 3 +12v 4 gnd pin # signal name pin # signal name 1 gnd 2 gnd 3 memcs16 * 4 sbhe * 5 iocs16 * 6 sa23 7 irq10 8 sa22 9 irq11 10 sa21 1...

  • Page 20: J27: Pc/104 + (Optional)

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 17 j27: pc/104 + (optional) vi/o setting: +5v only if you need to use vi/o as +3.3v, please use vdx-6121-fd-v2-p pin # a b c d 1 gnd nc +5v ad00 2 vi/o(+5v) ad02 ad01 +5v 3 ad05 gnd ad04 ad03 4 c/be0# ad07 gnd ad06 5 gnd ad09 ad08 gnd 6 ad11 vi/o(...

  • Page 21: J37: Line Out (Optional)

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 18 j37: line out (optional) pin # signal name 1 loutr 2 gnd 3 gnd 4 loutl j38: mic-in (optional) pin # signal name 1 micvref 2 gnd 3 gnd 4 mic-in j39: jtag disable (default setting: pin 1 & pin 2 short) pin # signal name pin # signal name 1 gnd 2 ...

  • Page 22: 2.5

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 19 2.5 system mapping.

  • Page 23

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 20

  • Page 24

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 21.

  • Page 25: 2.6 Watchdog

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 22 2.6 watchdog timer there are two watchdog timers in vortex86sx/dx cpu. One is compatible with m6117d watchdog timer and the other is new. The m6117d compatible watchdog timer is called wdt0 and new one is called wdt1. We also provide dos, linux...

  • Page 26: 2.7 Gpio

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 23 2.7 gpio (general purpose input / output) 40 gpio pins are provided by the vortex86sx/dx for general usage in the system. All gpio pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors. We ...

  • Page 27

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 24 2.8 spi flash (serial peripheral interface) as spi flash ( serial peripheral interface) offers many benefits including: reduced controller pin count, smaller and simpler pcbs, reduced switching noise, less power consumption, and lower system co...

  • Page 28: Driver Installation

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 25 c h a p t e r 3 driver installation operating system support the vortex86sx-6121-v2 isa cpu board supports embedded software: free dos, dos 6.22, pcdos 7.1, dr-dos, x-dos, os/2, windows ce 5.0 / 6.0 please get the drivers from the driver cd whi...

  • Page 29: Appendix

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 26 appendix a. Tcp/ip library for dos real mode dsock is a tcp/ip library for dos real mode, which is used by rsip. It provides simple c functions for programmer to write internet applications. Icop also provide internet examples using dsock: boot...

  • Page 30: B.  Bios Default Setting

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 27 b. Bios default setting if the system cannot be booted after bios changes are made, please follow below procedures in order to restore the cmos as default setting. Press “end” key, when the power on press to enter the ami bios setup press “f9” ...

  • Page 31: Warranty

    Vortex86sx-6121-v2 vortex86sx ™ half-size cpu module 28 warranty this product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it...