Interactive Fitness Expresso HD Assembly And Installation Manual - page 15
Expresso HD Recumbent Bike
Assembly and Installation Guide
2. Configure the Bike - In the Configuration screen, select Configure Bike and press OK. Then follow the onscreen
instructions to complete the configuration. Here is a brief description of the steps:
a. Calibrate Steering: Follow onscreen instructions.
b. Resynchronize Time: Sync bike time with servers. (Recommended)
c. Configure Timezone: Default is PST. (Recommended)
d. Set Idle Timeout: Default is 60 seconds.
e. Set Player ID: Assign a unique ID to each bike for group rides. (Recommended for multi bike installations)
f.
Toggle Network Riders: Default is Enabled. (Required for eLive)
g. Toggle TV: This setting is currently unavailable.
h. Configure TV System: This setting is currently unavailable.
i.
Configure TV Channels: This setting is currently unavailable.
j.
Configure Music: By Default mature audience channels are off.
k. Enable Logins: Turn on/off login options. Default is on. (Required for eLive)
l.
Set Metric System: Turn on/off metric distances. Default is off.
m. Set Steering: Reverses steering. (Not recommended)
n. Station Health: This is a diagnostic tool (Not required)
o. Reset Location: Change the location name displayed on the station. (Offline stations only)
3. Configure Network - Select Use Network and press OK.
a. Select Ping Expresso Server and press OK to check connectivity.
b. Select Upload Log Files after the initial installation or as requested by Interactive Fitness Customer Service.
4. Exit the Configuration screen
a. Follow onscreen instructions to return to the Main Menu.
b. Select Exit Config Mode
15