Summary of InterServe 75
Page 1
Interserve 75 start here october 1998 dha027920
Page 2
Copyright 1998 intergraph computer systems. All rights reserved. This document contains information protected by copyright, trade secret, and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any derivative work, without written ...
Page 3: Contents
Iii contents preface ...................................................................................................................................... V about this document ............................................................................................................... V document...
Page 4
Iv.
Page 5: Preface
V preface interserve 75 start here provides information you need to set up the operating system and associated system software on an interserve 75. The document also provides information you will need if you have to reinstall the operating system and associated system software. About this document i...
Page 6: Hardware Information
Vi hardware information for more information about system hardware, see the system guide delivered with the system. Note the interserve 75 system hardware is the same as the td-260 system hardware described in the system guide . Ergonomic information read the ergonomics guide delivered with your sys...
Page 7: Faxlink
Vii to connect to the ibbs: 1. Set your system’s communications protocol for eight (8) data bits, no parity, one (1) stop bit, and any baud rate up to 14,400. 2. Using a modem, call 1-205-730-8786. Outside the united states, call one of the mirror sites listed on world wide web; see the software sup...
Page 8: More Support Options
Viii u the product’s serial number. Software product serial numbers are included in the product packaging. Hardware product serial numbers are on a sticker affixed to the hardware product. U your name and telephone number. U a brief description of the question or problem. More support options to get...
Page 9: Getting Started
1 1 getting started your interserve 75 shipped with the microsoft windows nt server 4.0 operating system partially installed. To set up your interserve 75 for use, you will need to set up the system hardware, and then set up the operating system and associated system software. To set up your interse...
Page 10
2.
Page 11: Setting Up System Software
3 2 setting up system software follow the instructions in this chapter to set up the operating system and associated system software for your interserve 75. Preparing for setup your system’s primary system disk drive and any additional disk drives were formatted and partitioned before shipment. In e...
Page 12
4 if the system is connected to a network, get and record the following information from your network administrator: u computer name for your system: u workgroup name (if the system will be part of a workgroup): u domain name (if the system will be part of a windows nt domain): u security role for y...
Page 13
5 the windows nt delivery media contains software and drivers for both reduced instruction set computing (risc)- and intel-based systems. When installing windows nt distribution files, make sure to install them from the \ i 386 directory (the intel software directory) on the delivery media. Starting...
Page 14: Finishing System Setup
6 after you configure networking, you can join a workgroup or domain. You cannot set up a user account until after you have completed setup and rebooted the system. See windows nt help for details on setting up a user account and joining a workgroup or domain. For more information on setup, and on u...
Page 15
7 available on the operating system cd-rom. You may need these backup diskettes later -- for example, if you have to reinstall a device driver or the operating system. Note you may not have to create backup diskettes for all system software. If version manager does not list drivers or other system s...
Page 16: What’S Next?
8 publishing a macintosh volume for macintosh clients to access your interserve 75, you must publish a macintosh volume. To publish a macintosh volume: 1. Go to start/programs/administrative tools/server manger. The server manager dialog displays. 2. Click macfile, and then click volumes. The macint...
Page 17: Reinstalling System Software
9 3 reinstalling system software follow the instructions in this section only if you have to reinstall the operating system and associated system software on your interserve 75. Read and understand the entire chapter before you begin. Before you begin have the following items available: u the inform...
Page 18: System Software Products
10 system software products the following table lists drivers and other system software products installed on various configurations of interserve 75. If a system software product is not listed, but installed on your system, the product is available from an operating system software cd-rom, or is de...
Page 19
11 follow the instructions in microsoft’s start here document to install windows nt. As you install the operating system, select the default responses during the setup process, except for the following: u on a system with a 3com network adapter, the network adapter driver software is not preinstalle...
Page 20
12 to enable ide/atapi bus mastering: 1. Ensure that the operating system, service pack 3 software, and qfe update software ( qfe _ nt *) are installed. Note the qfe update software includes an updated atapi device driver that should be installed after service pack 3. Note for reasons of system perf...