Td-2x, td-22x late-breaking news june 1998 dha0209h0
Copyright 1998 intergraph computer systems. All rights reserved. This document contains information protected by copyright, trade secret, and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any derivative work, without written ...
1 general default disk drive formatting and partitioning your system’s primary system disk drive and any additional disk drives were formatted and partitioned before shipment. In explorer or my computer, you can right-click a disk drive and click properties to display the drive’s partition size and ...
2 avoiding loss of video during boot (td-22/25) on a td-22 or td-25 with intense 3d 100 graphics and a scsi adapter (part number cinf02702), the system may lose video during boot. This may occur when the intense 3d 100 video display adapter is running video bios version 98, 103, or 103a. The video b...
3 windows nt 4.0 ethernet network setup and configuration on a system equipped with an ethernet network adapter, note the following: u network adapter driver software is preinstalled. Operating system setup no longer prompts you to install networking. U core network software and the netbeui network ...
4 6. In the data box, type f347. 7. Under radix, select hex; then select ok. 8. Exit from the registry editor. 9. Restart the system. 10. Restart the system. Default ensoniq mixer settings if you need to return the ensoniq mixer software to its default settings (for example, after reinstalling windo...
5 windows 95 installing 3com network adapter driver software if your system includes a 3com network adapter, the driver software is not preinstalled. The first time windows 95 starts, it detects the 3com network adapter and prompts you for the driver software. Install the driver software from the 3 ...
6 a backup diskette, you can use the product to add custom settings to internet explorer 4.01. These settings include links that give you quick access to intergraph computer systems sites on the world wide web. To use the ie 4 settings product: 1. In explorer or my computer, go to the following dire...
7 to use a pc card device with a system in the described configuration, shut down the system, insert the pc card device in the pc card adapter, and then restart the system. Once the system has restarted, you can remove and reinsert the pc card device as needed. Default ensoniq mixer settings if you ...
8 while installing the driver, you are asked to insert windows 95 disk 1. The driver’s setup program is looking for the driver diskette delivered with the adapter. Make sure the diskette is in the floppy disk drive, type the path to the diskette (typically a:\), and then click ok. While installing t...
