1. DL manuals
  2. Interlogix
  3. Media Converter
  4. FS MC250-1T/1S
  5. User Manual

Interlogix FS MC250-1T/1S User Manual

Manual is about: Interlogix Industrial Media Converter User Manual

Summary of FS MC250-1T/1S

  • Page 1

    Ifs mc250-1t/1s user manual p/n 1072573 • rev r00.03 • iss 10sep12.

  • Page 2

    Copyright © 2012 utc fire & security company. All rights reserved. Trademarks and patents interlogix, ifs mc250-1t/1s, the ifs brand and logo are trademarks of utc fire & security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of t...

  • Page 3

    2002/96/ec (weee directive): products marked with this symbol cannot be disposed of as unsorted municipal waste in the european union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For...

  • Page 5: Contents

    Ifs mc250-1t/1s user manual i contents overview 1 package contents 1 product features 2 installation 3 product description 3 front panel 5 led indicators 6 converter top panel 7 wiring the power inputs 7 wiring the fault alarm contact 8 mounting installation 9 installation steps 13 switch operation ...

  • Page 7: Overview

    Ifs mc250-1t/1s user manual 1 overview this section describes the functionalities of the ifs mc250- 1t/1s industrial media converter’s components and guides how to install it on the desktop. Basic knowledge of networking is assumed. Please read this chapter completely before continuing. In the follo...

  • Page 8: Product Features

    2 ifs mc250-1t/1s user manual product features physical port mc250-1t/1s … 1-port 10/100base-tx rj-45 … 1-port 100base-fx sfp slot (distance depends on sfp module) industrial design … slim type ip-30 metal case … -40 to +75 degree c operating temperature … din rail and wall mount design … 12 to 48v ...

  • Page 9: Installation

    Ifs mc250-1t/1s user manual 3 installation this section describes the functionalities of the industrial fast ethernet switch’s components and guides how to install it on the desktop. Basic knowledge of networking is assumed. Please read this chapter completely before continuing. In the following sec...

  • Page 10

    4 ifs mc250-1t/1s user manual with the fast ethernet sfp interface, the mc250-1t/1s extends the transmission distances from 220km to 70km. The actual distance is defined by the fast ethernet sfp module selected. The ifs family of fast ethernet sfp modules comes with one of the following models. The ...

  • Page 11: Front Panel

    Ifs mc250-1t/1s user manual 5 front panel the figure below shows the front panel of the mc250-1t/1s..

  • Page 12: Led Indicators

    6 ifs mc250-1t/1s user manual led indicators system led color function p1 green indicates that power 1 is on. P2 green indicates that power 2 is on. Fault green indicates either power 1 or power 2 has no power. Per 10/100base-tx port led color function light indicates that the link through that port...

  • Page 13: Converter Top Panel

    Ifs mc250-1t/1s user manual 7 converter top panel the top panel of the mc250-1t/1s consists of a terminal block connector with two dc power inputs. Wiring the power inputs the 6-contact terminal block connector on the top panel of the mc250-1t/1s is used for two dc redundant powers inputs. Please fo...

  • Page 14: Note:

    8 ifs mc250-1t/1s user manual 1 2 3 4 5 6 power 1 fault power 2 - + - + wiring the fault alarm contact the fault alarm contacts are in the middle of the terminal block connector as the picture shows below. Inserting the wires, the mc250-1t/1s will detect the fault status of the power failure and the...

  • Page 15: Mounting Installation

    Ifs mc250-1t/1s user manual 9 mounting installation this section describes how to mount the mc250-1t/1s and make connections to it. Please read the following section and perform the procedures in the order presented. Note: in the installation steps below, this manual uses the ifs 8 port industrial g...

  • Page 16

    10 ifs mc250-1t/1s user manual 1. Lightly press down and push the bottom of the din-rail connector mount into the track. 2. Check that the din-rail connector mount is tightly mounted on the track. 3. Please refer to following procedures to remove the mc250- 1t/1s from the track..

  • Page 17: Mounting to A Wall

    Ifs mc250-1t/1s user manual 11 4. Lightly press down and pull the bottom of din-rail connector mount to remove it from the track. Mounting to a wall to install the mc250-1t/1s on the wall, please follow the instructions described below. 1. Loosen the screws to remove the din rail from the media conv...

  • Page 18

    12 ifs mc250-1t/1s user manual 2. Place the wall mount plate on the rear panel of the mc250- 1t/1s. 3. Assemble the wall mount plate on the mc250-1t/1s 4. Use the hook holes at the corners of the wall mount plate to hang the mc250-1t/1s on the wall..

  • Page 19: Installation Steps

    Ifs mc250-1t/1s user manual 13 installation steps step 1: unpack the industrial fast ethernet switch. Step 2: check that din-rail is screwed on the industrial fast ethernet switch. (please refer to the din-rail mounting section for din-rail installation. If you want to wall mount the industrial fast...

  • Page 20: Switch Operation

    14 ifs mc250-1t/1s user manual switch operation address table the industrial fast ethernet switch is implemented with an address table. This address table is composed of many entries. Each entry is used to store the address information of each node in the network, including mac address, port no., et...

  • Page 21: Auto-Negotiation

    Ifs mc250-1t/1s user manual 15 from the frames before transmission. Lack of error packet occurrence is important for an efficient and stable network.. The industrial fast ethernet switch scans the destination address from the packet-header, searches the routing table provided for the incoming port a...

  • Page 22: Troubleshooting

    16 ifs mc250-1t/1s user manual troubleshooting this chapter contains information to help resolving issues. If the industrial fast ethernet switch is not functioning properly, make sure the device was set up according to instructions in this manual. The link led is not light solution: check the cable...

  • Page 23: Specifications

    Ifs mc250-1t/1s user manual 17 specifications product mc250-1t/1s hardware specification 10/100base-tx port 1 rj-45 auto-mdi/mdi-x port 100base-fx port 1 sfp slot fiber port type cable distance optical frequency launch power (dbm) receive sensitivity (dbm) maximum input power (dbm) deprends by sfp m...

  • Page 24: Rj45 Pin Assignments

    18 ifs mc250-1t/1s user manual when connecting to other ethernet equipment such as a router, bridge, switch, or hub, please refer to that device’s technical manual. Rj45 pin assignments 10/100mbps, 10/100base-tx rj-45 connector pin assignment contact mdi media dependant interface mdi-x media dependa...

  • Page 25

    Ifs mc250-1t/1s user manual 19 please make sure your connected cables are with same pin assignment and color as above picture before deploying the cables into your network..

  • Page 26: Contacting Technical Support

    20 ifs mc250-1t/1s user manual contacting technical support contact technical support if you encounter any difficulties during this installation. Please make sure you have the requested diagnostic or log files ready before you contact us by phone or go to www.Interlogix.Com/customer-support . Techni...