1. DL manuals
  2. Interlogix
  3. Media Converter
  4. IFS MCR200-1T/1CX
  5. User Manual

Interlogix IFS MCR200-1T/1CX User Manual

Manual is about: Interlogix Ethernet over VDSL2 Converter

Summary of IFS MCR200-1T/1CX

  • Page 1

    Ifs mcr200-1t/1cx user manual p/n 1076520 • rev a • iss 07feb12.

  • Page 2

    Copyright © 2012 utc fire & security company. All rights reserved. Trademarks and patents interlogix, ifs mcr200-1t/1cx, the ifs brand and logo are trademarks of utc fire & security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of...

  • Page 3

    European union directives 2004/108/ec (emc directive): hereby, utc fire & security declares that this device is in compliance with the essential requirements and other relevant provisions of directive 2004/108/ec 2002/96/ec (weee directive): products marked with this symbol cannot be disposed of as ...

  • Page 5: Contents

    Ifs mcr200-1t/1cx user manual i contents overview 1 package contents 1 ethernet over vdsl2 bridge description 1 product features 3 hardware description 4 mcr200-1t/1cx 4 front panel 4 led indicators 5 rear panel 5 mode dip switch 6 co/cpe 6 fast and interleave mode 7 band plan 7 target snr (signal n...

  • Page 7: Overview

    Ifs mcr200-1t/1cx user manual 1 overview package contents check the contents of your package for following parts: • mcr200-1t/1cx x1 • user’s manual x1 if any of the items in the package are damaged or missing, please contact your distributor or ifs sales rep. If possible, retain the original carton...

  • Page 8: Note:

    2 ifs mcr200-1t/1cx user manual this capability is ideal for use as an ethernet extender for your existing ethernet network. The mcr200-1t/1cx converter provides a cost-effective and efficient analog migration to long reach ethernet (lre) networks. The cable specifications of the connection are list...

  • Page 9: Product Features

    Ifs mcr200-1t/1cx user manual 3 product features the mcr200-1t/1cx ethernet over coax converter provides the following key features: • cost-effective vdsl2 co/cpe bridge solution • one unit design, co/cpe selectable via dip switch • defines asymmetric (band plan 998) and symmetric band plans for the...

  • Page 10: Hardware Description

    4 ifs mcr200-1t/1cx user manual hardware description mcr200-1t/1cx the mcr200-1t/1cx provides 1 bnc connector and supports 50 or 75 ohm cable with distances of up to 3.0km. The mcr200-1t/1cx provides 1 rj-45 port. It will distinguish the speed of the incoming connection automatically. This section d...

  • Page 11: Led Indicators

    Ifs mcr200-1t/1cx user manual 5 led indicators system led color function on power on pwr green off power off vdsl led color function on indicates that the vdsl link is established. Fast blinking indicates that the vdsl link is at training status (about 10 seconds). Lnk/act green slow blinking indica...

  • Page 12: Mode Dip Switch

    6 ifs mcr200-1t/1cx user manual figure 2: rear panel mode dip switch the mcr200-1t/1cx provides 4 selective transmission modes. By switching the transmission modes, you can obtain the best transmission mode to suit your cable quality or distance of connectivity. The following is a summary table of t...

  • Page 13: Note:

    Ifs mcr200-1t/1cx user manual 7 home or remote side as the long reach data receiver. The cpe can be connected to a pc, ip camera or wireless access point network devices. However, for high-end security surveillance applications, the cpe setting should be selected for use at the head-end/nvr location...

  • Page 14: Dc Power Jack

    8 ifs mcr200-1t/1cx user manual dc power jack the mcr200-1t/1cx requires 5 vdc power input (sold separately). If you have problems related to the power connection, please contact your local sales representative. Note: this device requires power to operate. For continuous functionality of the device,...

  • Page 15: Installation

    Ifs mcr200-1t/1cx user manual 9 installation installing the mcr200-1t/1cx the mcr200-1t/1cx does not require any software configuration. Users can immediately use any feature of this product simply by attaching the cables and power plug. Based on the quality of the coaxial cable, the maximum distanc...

  • Page 16: Connecting The McR200-1T/1Cx

    10 ifs mcr200-1t/1cx user manual connecting the mcr200-1t/1cx connecting to a standalone ip device refer to the following procedures to setup the mcr200- 1t/1cx to a standalone pc. 1. Set the mcr200-1t/1cx to be co or cpe mode from the dip switch at the rear panel. 2. Turn power on the mcr200-1t/1cx...

  • Page 17: Note:

    Ifs mcr200-1t/1cx user manual 11 2. Turn the power on the mcr200-1t/1cx by connecting its power source. 3. The power led will illuminate. 4. Connect the coaxial cable from another mcr200-1t/1cx to the bnc port of the mcr200-1t/1cx. 5. The lnk led will illuminate. 6. Connect the ethernet port to an e...

  • Page 18: Note:

    12 ifs mcr200-1t/1cx user manual figure 6: insert a mcr200-1t/1cx into an available slot of the mcr-r15 3. Attach a rack-mount bracket to each side of the mcr-r15 chassis with screws supplied with the rack. 4. After the brackets are attached to the mcr-r15 chassis, use suitable screws to securely at...

  • Page 19: Power Information

    Ifs mcr200-1t/1cx user manual 13 power information the power input of mcr200-1t/1cx is a 2.5mm type in the central post and requires +5vdc power input. It will work with the supported power supply, as well as the mcr-r15 media converter rack chassis. If you need assistance regarding the correct powe...

  • Page 20: Troubleshooting

    14 ifs mcr200-1t/1cx user manual troubleshooting symptom: vdsl lnk led does not light after the cable is connected to the vdsl port. Checkpoint: • verify that the length of the cable connected between two mcr200-1t/1cx units are not more than 3 km. Please also try to adjust the dip switch of mcr200-...

  • Page 21: Faq

    Ifs mcr200-1t/1cx user manual 15 faq q1: what is the voltage and current rating to power mcr200- 1t/1cx media converter? A1: 5 vdc, 2a q2: what is vdsl2? A2: vdsl2 (very high-bit-rate digital subscriber line 2), g.993.2 is the newest and most advanced standard of xdsl broadband wire line communicati...

  • Page 22

    16 ifs mcr200-1t/1cx user manual packets of data. Snr measures the quality of a transmission channel over a network channel. The greater the ratio, the easier it is to identify and subsequently isolate and eliminate the source of noise. Generally speaking, the higher snr value gets better line quali...

  • Page 23: Specifications

    Ifs mcr200-1t/1cx user manual 17 specifications product mcr200-1t/1cx hardware specifications 10/100 base-tx 1 x rj-45, auto-negotiation auto-mdi/mdi-x ports vdsl 1 x bnc, female connector dip switch 4 position dip switch functionality • co / cpe mode select • selectable fast and interleaved mode • ...

  • Page 24

    18 ifs mcr200-1t/1cx user manual asymmetric mode 200m -> 100/65mbps 400m -> 100/64mbps 600m -> 100/59mbps 800m -> 100/53mbps 1000m -> 94/44mbps 1200m -> 84/36mbps 1400m -> 74/28mbps 1600m -> 66/19mbps 1800m -> 60/14mbps 2000m -> 44/15mbps 2200m->35/12mbps 2400m->32/10mbps 2600m->29/8mbps 2800m->27/6...

  • Page 25: Contacting Technical Support

    Ifs mcr200-1t/1cx user manual 19 contacting technical support contact technical support if you encounter any difficulties during this installation. Please make sure you have the requested diagnostic or log files ready before you contact us by phone or go to www.Interlogix.Com/customer-support . Tech...