Is-zw-tstat-300 advanced thermostat operation guide content contact information 1 description 2 home screen 3 menu screen 3 program screen 5 manual screen 6 initial settings 7 auto-run program 7 other functions 8 communicating thermostat 9 specifications 10 contact information for contact informatio...
Description the is-zw-tstat-300 programmable communicating thermostat operates via a high-quality, easy-to-use touch screen. To program or adjust your thermostat, simply touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep”. The screen will respond...
Home screen the home screen is displayed when the unit is operating. This screen shows you the current settings and conditions. Figure 2: home screen link radio target temp time of day current room temperature target temperature day thermostat mode radio indicator time slot fan status lock status ch...
Time of day touch the left (down) or right (up) arrows next to the time display to set the current time (1 minute per touch). Touch and hold the arrow for fast time set (15 minute jumps). Day of week touch the day area to select the present day. Filter the thermostat can be programmed to remind you ...
For full lock, touch the lock icon again for 5 seconds to go to full lock mode (lock icon with two bars). No changes can be made. Once locked, the thermostat will respond just to mode and menu. To unlock, press the menu button. Touch and hold the lock icon for 5 seconds for two bars (if not there al...
Manual screen touch the large current temperature display on the middle of the home screen to access the manual screen. You can use the manual screen to make temporary changes to your thermostat’s operation. Note: the mode must be in heat or cool to access the manual screen. Figure 5: manual screen ...
Table 1: epa program morn day even nite heat 6:00am 8:00am 6:00pm 10:00pm all days 70 f 62 f 70 f 62 f morn day even nite cool 6:00am 8:00am 6:00pm 10:00pm all days 78 f 85 f 78 f 82 f to change the program make sure the thermostat mode is set to either heat or cool, then press the prog button to di...
Feature, press the save energy button in the upper left corner of the unit. The screen will now read “save energy”. To return to normal operation, press the save energy button again. This is useful to save energy if your are going to be gone for a short time. Mode button the mode button sets the the...
Figure 6: usnap radio and port usnap radio usnap port the usnap ports allow you to connect your thermostat to your home z-wave network. This can give you access to your home’s hvac system even when you are away (with additional web service). It can also give you access to web based efficient energy ...
Statement of use: 100% compatible with all popular residential hvac systems; 24 vac single, two- stage conventional heating systems (gas/oil/electric), heat pumps, single stage or auxiliary heat (electric or fossil), zoned forced air and zoned hot water (two or three wire), millivolt systems (with a...
12 is-zw-tstat-300 advanced thermostat operation guide.
