Interlogix TruVision 10 Quick Start Manual
TruVision NVR 10 Quick Start
Guide
Figure 1: Back panel connections
1. Embedded ports to connect up to eight IP
cameras (depending on model).
2. Connect up to four alarm inputs and one alarm
relay output.
3. Connect to a network.
4. Connect an RCA connector for audio input
5. Connect to speakers for audio output.
6. Connect to a VGA monitor.
7. Connect to an HDTV. The HDMI connection
supports both digital audio and video.
8. Universal Serial Bus (USB) 3.0 port. Connect to
an additional device such as a USB mouse,
CD/DVD burner, or USB HDD.
9. Connect to ground.
10. Connect to a power cord.
P/N 1072767-EN • REV C • ISS 12MAY15
© 2015 United Technologies Corporation. Interlogix is part of UTC Building & Industrial Systems, a unit of United
Technologies Corporation. All rights reserved.