Truvision ir turret camera tvt-2201/4201 installation guide p/n 1072922a • rev a • iss 10feb15.
Installation guide 1 contents package contents 2 camera description 4 installation 4 specifications 8 regulatory information 9.
2 installation guide package contents this is the truvision ir turret camera installation guide for models tvt-2201/4201. This guide describes a standard installation. The camera consists of the following: camera with power and video output cables 3 m4 screws (3 x 25 mm) and 3 drywall anchor (Ø7.5 x...
Installation guide 3 hex wrench installation guide cd.
4 installation guide camera description 1. Mounting base 2. Fixed ring 3. Lock screw 4. Enclosure 5. Camera 6. Video cable 7. Power cable installation to install the camera: 1. Using the template, place it level against the mounting surface and mark the position of the mounting holes..
Installation guide 5 2. Following all local codes, drill and prepare the mounting holes. 3. Loosen the lock screw on the mounting base to release the turret camera. 4. Securely fasten the mounting base to the mounting surface with the screws..
6 installation guide 5. Connect a 75-ohm coaxial video cable to the video cable, and connect a 12 vdc power supply to the power cable. 6. Secure the camera to the mounting base by tightening the lock screw..
Installation guide 7 7. Loosen the locked screw to adjust the surveillance angle according to the figure below, then tighten the locked screw. 0°~360° 0°~75° 0°~360°.
8 installation guide specifications power supply 12 vdc current max. 330 ma power consumption max. 1.8 w (max. 4 w with ir cut filter on) weight 0.88 lb. (400 g) dimensions (Ø × l) 2.76 x 5.89 in. (89.6 x 59.1 mm).
Installation guide 9 regulatory information copyright: © 2015 united technologies corporation. Interlogix is part of utc building & industrial systems, a unit of united technologies corporation. All rights reserved. Trademarks and patents: trade names used in this document may be trademarks or regis...
10 installation guide interference at his own expense. Acma compliance notice! This is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Canada this class a digital apparatus complies with canadian...