Truvision ir turret camera tvt-2202/tvt-4202 installation guide p/n 1072921 • rev a • iss 10feb15.
Installation guide 1 contents product overview 2 camera description 3 installation 4 programming 6 specifications 7 setup menu 8 regulatory information 9.
2 installation guide product overview this is the truvision ir turret camera installation guide for models tvt-2202/tvt-4202. This guide describes a standard installation. Package contents: camera with power and video output cables 4 m4 screws (4 x 25 mm) and 4 dry wall anchors (Ø7.5 x 24.5 mm) for ...
Installation guide 3 • weee and battery disposal installation guide cd camera description 1. Camera 2. Enclosure 3. Mounting base 4. Video cable 5. Power cable 6. Lock screw 7. Zoom and focus.
4 installation guide installation to install the camera: 1. Using the template, place it level against the mounting surface and mark the position of the mounting holes. 2. Following all local codes, drill and prepare the mounting holes. 3. Loosen the lock screw and release the clip plate to release ...
Installation guide 5 4. Fix the mounting base to the mounting surface. 5. Route the cables to the cable hole and connect the corresponding cables. Connect a 75 ohm coaxial video cable to the video cable, and connect a 12 vdc power supply to the power cable.. 6. Adjust the camera according to the fig...
6 installation guide 7. Secure the camera to the mounting base by tightening the lock screw. 8. Use a screwdriver to adjust the zoom screw and the focus screw until you get the optimum image. Programming once the camera hardware has been installed, the camera can then be configured by using a tvs- c...
Installation guide 7 the setup menu provides access to the camera configuration options. See page 8 for an overview of the menu. Please refer to the configuration manual for further information on setting up the camera. Program the camera by attaching a standard video monitor to the system. Specific...
8 installation guide setup menu.
Installation guide 9 regulatory information copyright: © 2015 united technologies corporation. Interlogix is part of utc building & industrial systems, a unit of united technologies corporation. All rights reserved. Trademarks and patents: trade names used in this document may be trademarks or regis...
10 installation guide interference in which case the user will be required to correct the interference at his own expense. Acma compliance notice! This is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate me...
