Interlogix TVB-2201 Installation Manual

Summary of TVB-2201

  • Page 1

    Truvision ir bullet camera tvb-2201/tvb-4201 and tvb-2202/tvb-4202 installation guide p/n 1072924 • rev a • iss 10feb15.

  • Page 2: Content

    2 installation guide content product overview 2 camera description 4 installation 4 specifications 6 regulatory information 7 product overview this is the truvision ir bullet camera installation guide for models tvb-2201 / tvb-2202 / tvb-4201 / tvb-4202. This guide describes a standard installation..

  • Page 3: Package Contents:

    Installation guide 3 package contents: camera with power and video output cables 3 m4 screws (3 x 25 mm) and 4 dry wall anchors (Ø7.5 x 24.5 mm) for wall or ceiling installation template cd installation guide • weee and battery disposal.

  • Page 4: Camera Description

    4 installation guide camera description 1. Video cable 2. Power cable 3. Mounting base 4. Sun shield 5. Lens 6. Ir led installation to install the camera: 1. Using the template, place it level against the mounting surface and mark the position of the mounting holes. 5 6 4 2 1 3.

  • Page 5

    Installation guide 5 2. Following all local codes, drill and prepare the mounting holes. 3. Securely fasten the mount to the mounting surface with the supplied screws. 4. Connect a 75-ohm coaxial video cable to the video cable and a 12 vdc power supply to the power cable. 5. Loosen the bracket screw...

  • Page 6: Specifications

    6 installation guide 6. Retighten the bracket screws. Specifications power supply 12 vdc current max. 330 ma power consumption 1.8 w max.(max. 4 w with ir cut filter on) weight 0.79 lb. (360 g) dimensions (Ø × l) 2.76 x 5.89 in. (70 x 149.5 mm) 360° 90° 360°.

  • Page 7: Regulatory Information

    Installation guide 7 regulatory information copyright: © 2015 united technologies corporation. Interlogix is part of utc building & industrial systems, a unit of united technologies corporation. All rights reserved. Trademarks and patents: trade names used in this document may be trademarks or regis...

  • Page 8: Acma Compliance

    8 installation guide interference in which case the user will be required to correct the interference at his own expense. Acma compliance notice! This is a class a product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate mea...