Uvd-xp4dnr(-p) camera quick start guide p/n 1079205a • rev 1.0 • iss 20dec11.
Copyright © 2011 utc fire & security. All rights reserved. Trademarks and patents interlogix, ultraview names and logos are trademarks of utc fire & security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products...
Quick start guide 3 en description the uvd-xp4dnr(-p) camera consists of the following parts: • the camera assembly • monitor output cable • mounting screws, wall anchors, and hex key figure 1: the camera assembly and monitor output cable 1. Lens body 5. Camera body 2. Bubble 6. Monitor output bnc 3...
En 4 quick start guide osd control pad table 1 lists the osd control pad functions and describes their use. Table 1: osd control pad functions pad directions description up moves the cursor upward to select an item. Left moves the cursor left to select or adjust the parameters of the selected item. ...
Quick start guide 5 en white cable. Video out. Black cable. Video ground. Note: for ac24v or dc12v, black or red may be used for ground. Camera installation to mount the camera, attach the camera to the mounting surface using the appropriate fasteners. Angle adjustment to adjust the horizontal angle...
En 6 quick start guide 1. Zoom ring thumbscrew for va2 and focus ring for va9 lens. 2. Focus ring thumbscrew for va2 and zooming ring for va9 lens. 1. Loosen the zoom ring thumbscrew. 2. Turn the zoom ring to set the desired zoom. 3. Tighten the zoom ring thumbscrew. 4. Loosen the focus ring thumbsc...
Quick start guide 7 en item. Press right or left on the control pad to select the different options available for the item. You can return to the previous menu from any of the menus (except the main menu) by selecting the previous page option. The menu map is shown on the back page of this manual. R...
En 8 quick start guide.
