Summary of VD-IP-XP4DNP
Page 1
Uvd-ip-xp4dnr(-p) camera user manual p/n 1072545a-en • rev 1.0• iss 18jun12.
Page 2
Copyright © 2012 utc fire & security. All rights reserved. Trademarks and patents the interlogix and ultraview names and logos are trademarks of utc fire & security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective p...
Page 3: Contents
Uvd-ip-xp4dnr(-p) camera 1 - en contents introduction 2 product description 2 features 2 user guidelines 2 package contents 3 plenum-compliant cabling 3 installation 4 viewing the camera via a digital (ip) connection 4 software requirements 4 connecting analog cables 6 installing the camera 6 angle ...
Page 4: Introduction
En - 2 uvd-ip-xp4dnr(-p) camera introduction this user manual provides basic information on setting up and using the uvd-ip-xp4dnr(-p) camera. Product description the uvd-ip-xp4dnr(-p) color video camera uses a digital signal processor (dsp) to process video signals. The video camera includes a micr...
Page 5: Package Contents
Uvd-ip-xp4dnr(-p) camera 3 - en • if the light source where the camera is installed experiences rapid, wide-variations in lighting, the camera may not operate as intended. Warning: to reduce the risk of fire or electronic shock, do not expose the camera to rain or moisture and do not remove the cove...
Page 6: Installation
En - 4 uvd-ip-xp4dnr(-p) camera the air space must be specifically marked for that purpose or enclosed in a conduit. Re-route the leads from the camera so they exit from the threaded knockout on the side of the camera (see figure 2 below.) move the plug from the side threaded knockout and place it o...
Page 7
Uvd-ip-xp4dnr(-p) camera 5 - en a vlc player activex plug-in is required to play video when internet explorer is used to monitor the camera. Figure 3: activex plug-in option to configure the camera: 1. Configure the uvd-ip camera with a default ip address: 10.1.2.11 2. Configure your host pc/laptop ...
Page 8: Connecting Analog Cables
En - 6 uvd-ip-xp4dnr(-p) camera connecting analog cables to connect the cables: 1. Connect a coaxial cable from the camera’s bnc connector to a cctv monitor or video recording device. 2. Connect a poe switch, a 12 vdc or 24 vac power supply to the power input. Do not connect both the poe connection ...
Page 9: Zoom and Focus Adjustment
Uvd-ip-xp4dnr(-p) camera 7 - en figure 4: camera adjustment platform horizontal adjustment platform vertical adjustment rotor horizontal adjustment zoom and focus adjustment see figure 5 below for the location of the zoom and focus ring thumbscrews. Figure 5: zoom and focus adjustment zoom ring thum...
Page 10: Functions
En - 8 uvd-ip-xp4dnr(-p) camera connecting an analog monitor to set camera functions connect a standard video monitor to the system to adjust the quality of the video image using the dip switches. The dip switches can also be adjusted when connected to the ip system. To connect a video monitor: 1. P...
Page 11: Day/night
Uvd-ip-xp4dnr(-p) camera 9 - en day/night this function controls whether the camera is in automatic day/night mode or forced into night mode. When set to auto day/night mode, the camera produces high-quality color video during the day or when light levels are high. It then switches to monochrome and...
Page 12
En - 10 uvd-ip-xp4dnr(-p) camera switch description 2. Backlight compensation on: blc on; off: blc off 3. Exposure ai/ae on: auto exposure (ae) mode; off: auto iris (ai) mode 4. Day/night setting on: black and white mode; off: auto day/night mode 5. High/normal resolution on: high resolution; off: n...