Intermatic HA04 Supplementary Manual

Intermatic, Inc.  Spring Grove, IL  60061   www.intermatic.com 

Thank you for purchasing Intermatic’s HomeSettings devices.  With the HomeSettings program you 

can reliably and remotely control lighting and appliances.   

The outstanding features of the HomeSettings HA04 Outdoor Appliance Module includes: 

•  Feedback that will allow you to see whether your device has received the ON/OFF (you cannot 

DIM with this module) signal.  

•  RF signal reliability – each HomeSettings product has a special feature that virtually 

guarantees that RF signals are received 

•  Ease of installation 

• Manual 

override 

• Weather 

resistant 

•  Compatible with other Z-wave™ enabled devices

The HA04 Outdoor Appliance Module is a Z-wave™ enabled device and is fully compatible with any 

Home Settings network and any Z-wave™ enabled network. Z-wave™ enabled devices displaying the 

Z-wave™ logo can also be used with Home Settings modules and controllers regardless of the 

manufacturer, and Home Settings modules and controllers can also be used in other manufacturer’s 

Z-wave™ enabled networks

. Each module in a Home Settings network is designed to act as a 

repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended 

destination by routing the signal around obstacles and radio dead spots.

                                                        INSTALLATION                                                                

_

1. Plug the HA04 Outdoor Appliance Module into a 

120VAC, 60Hz outlet. 

2.  Plug a lamp or appliance into the module. 

3.  Turn the knob or switch on the lamp or appliance to the 

ON position. 

4.  To manually turn ON the HA04 Outdoor Appliance 

Module, press and release the ON/OFF/PROGRAM 

button. The green indicator LED will turn ON, and the 

lamp or appliance plugged into the HA04 Outdoor 

Appliance Module will also turn ON. 

5.  To manually turn OFF the HA04 Outdoor Appliance 

Module, simply press and release the 

ON/OFF/PROGRAM button. The green indicator will 

turn OFF and the lamp or appliance plugged into the 

HA04 Outdoor Appliance Module will also turn OFF. 

If the lamp does not turn ON, check to make sure that the power switch for your lamp is turned to the 

“ON” position, and check to make sure that your lamp is operating properly.

NOTE:  This module must be mounted in a vertical position with the receptacle facing 

downward and with the receptacle not reaching ground level.

Suitable for Indoor & Outdoor Use 

in Dry, Damp, & Wet Locations 

MODEL HA04 

OUTDOOR APPLIANCE MODULE