Intermec CK3 Series Instructions

You can use the vehicle dock mounting kit to install a vehicle dock on your vehicle. 

This kit includes:

•

One RAM

TM

 mount

•

Four #8 screws

•

Four #10 screws

•

Four Nylok nuts

•

One optional offset plate

To install the mounting kit

1

If you need additional cable clearance between the vehicle dock and the RAM 

mount, use four #8 screws to attach the offset plate to the vehicle dock.

2 If you attached the offset plate in Step 1, use four #10 screws and the Nylok nuts 

to attach the RAM mount to the offset plate.

If you are not using the offset plate, use four #8 screws to attach the RAM 

mount directly to the vehicle dock.

3 Attach the RAM mount base to a solid surface on your vehicle.

The CK3 vehicle dock is shown as an example.

Vehicle Dock Mounting Kit Instructions

#8 screw

(4 places)

Nylok nut

(4 places)

#10 screw

(4 places)

Offset plate

Vehicle dock

RAM mount