Intermec CN30 AD9 Quick Start Manual
What is the CN30 Charge Dock?
The CN30 Charge Dock is an accessory for the CN30 Mobile Computer. Use the dock for
serial or USB Client connectivity (to a host PC, for example) and the charger to recharge a
spare module or battery. Before using the charge dock, please read this guide thoroughly
and save it for future reference.
To use the charge dock, you need:
•
a DC power supply (p/n: 851-082-XXX)
•
an AC power cord.
It is important to purchase the appropriate power cord for your location. For more
information, contact your Intermec sales representative
The charge dock charges:
•
56-Key Module (p/n: VE00009-60028)
•
14-Key Module (p/n: VE00009-60029)
•
Battery (p/n: VE00009-60007)
.
Attention: Vous devez utiliser la source d’alimentation Intermec adéquate avec cet
appareil sinon vous risquez d’endommager l’équipement.
The CN30 Dock supports USB 1.1 connectivity from a CN30 Mobile Computer to a USB
host. RS-232 communications is supported via the serial port.
Note: Insert module with keys facing back.
Understanding the Status Indicators
Battery Charging
You must use the appropriate Intermec power supply with this device or
equipment damage may occur.
CN30 Charge Dock
Connectors
Docking
Bay
Charging
Bay
Status
Indicators
Description
Color
No battery or module installed.
Off
Charge cycle in progress
Red
Charge cycle complete.
Green
The battery is not charging.
Try these solutions:
Make sure the battery or module is firmly installed in the
charger.
Make sure the power supply is connected properly to a powered
AC outlet.
Make sure the room temperature is between 5 C and 35 C (41 F
and 95 F).
Yellow
Charging