1. DL manuals
  2. Intermec
  3. Desktop
  4. CV41C
  5. User Manual

Intermec CV41C User Manual

Manual is about: Vehicle Mount Computer (Windows CE)

Summary of CV41C

  • Page 1

    Cv41 vehicle mount computer (windows ce) cv41c user guide.

  • Page 2

    Ii cv41 vehicle mount computer (windows ce) user guide intermec technologies corporation worldwide headquarters 6001 36th ave.W. Everett, wa 98203 u.S.A. Www.Intermec.Com the information contained herein is provided solely for the purpose of allowing customers to operate and service intermec-manufac...

  • Page 3: Document Change Record

    Cv41 vehicle mount computer (windows ce) user guide iii document change record this page records changes to this document. The document was originally released as revision 001. Version number date description of change 002 7/2012 revised to include: • wwan radio information. • intermec dashboard inf...

  • Page 4

    Iv cv41 vehicle mount computer (windows ce) user guide.

  • Page 5: Contents

    Contents cv41 vehicle mount computer (windows ce) user guide v contents before you begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Xi safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 6: Manage The Computer

    Contents vi cv41 vehicle mount computer (windows ce) user guide connect an external antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 about the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 7: Configure The Computer

    Contents cv41 vehicle mount computer (windows ce) user guide vii update the intermec content software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 update the operating system and low-level firmware. . . . . . . . . . . . . . . . . . . . . . 41 update the...

  • Page 8: Enable Screen Blanking

    Contents viii cv41 vehicle mount computer (windows ce) user guide 6 use wwan and gps communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 about wwan communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 activate...

  • Page 9: Keypads and Keystrokes

    Contents cv41 vehicle mount computer (windows ce) user guide ix clean the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 a specifications and default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 10

    Contents x cv41 vehicle mount computer (windows ce) user guide.

  • Page 11: Before You Begin

    Before you begin cv41 vehicle mount computer (windows ce) user guide xi before you begin this section provides you with safety information, technical support information, and sources for additional product information. Safety information your safety is extremely important. Read and follow cautions i...

  • Page 12: Send Feedback

    Before you begin xii cv41 vehicle mount computer (windows ce) user guide visit the intermec technical knowledge base (knowledge central) at www.Intermec.Com and click support > knowledge central to review technical information or to request technical support for your intermec product. Send feedback ...

  • Page 13: Patent Information

    Before you begin cv41 vehicle mount computer (windows ce) user guide xiii if your product does not have its own product page, click support > manuals. Use the product category, the product family, and product to find your documentation. Patent information product is covered by one or more of the fol...

  • Page 14

    Xiv cv41 vehicle mount computer (windows ce) user guide.

  • Page 15: About The Computer

    1 1 about the computer this chapter introduces the cv41 vehicle mount computer with windows® ce operating system. Use this chapter to learn about the basic features and available accessories..

  • Page 16

    Chapter 1 — about the computer 2 cv41 vehicle mount computer (windows ce) user guide about the cv41 vehicle mount computer the rugged cv41 vehicle mount computer is designed for real-time data collection applications in warehousing, distribution, work-in-process, time and attendance, and stationary ...

  • Page 17

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 3 cv41 back view with quick mount smart dock canbus/audio connector usb connector com2 com1 strain relief clamps wwan antenna plug gps antenna plug wi-fi (aux) antenna plug wi-fi antenna plug.

  • Page 18: What’S New In This Release

    Chapter 1 — about the computer 4 cv41 vehicle mount computer (windows ce) user guide cv41 back view with quick mount smart dock what’s new in this release this version of the user guide contains these updates: • added information about enabling the wwan radio. For more information, see “about wwan c...

  • Page 19: Power Supply Options

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 5 • intel atom 1.6 ghz processor power supply options to use the cv41, you must apply power to it. By default, the cv41 comes with a dc power cable that connects directly to a forklift battery running 10-60 vdc power....

  • Page 20: About The Smart Dock

    Chapter 1 — about the computer 6 cv41 vehicle mount computer (windows ce) user guide about the smart dock the smart dock is secured to a forklift using a ram mounting kit and provides conditioned power to the cv41. The cv41 can then be connected or removed from the smart dock at any time. With this ...

  • Page 21

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 7 7 press the power button on the smart dock to turn on the dock. 8 press the power button on the cv41 to turn on the cv41..

  • Page 22

    Chapter 1 — about the computer 8 cv41 vehicle mount computer (windows ce) user guide remove the cv41 from the smart dock the cv41 can easily be moved from one vehicle equipped with the smart dock to another. 1 press and hold the power button on the cv41 until the computer turns off. 2 pull down on t...

  • Page 23: Secure The Cv41

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 9 secure the cv41 if you do not want users to remove the cv41 from a forklift, use either a padlock or a laptop security provision to keep your cv41 safe. Padlock provision location laptop security provision location.

  • Page 24: About The Leds

    Chapter 1 — about the computer 10 cv41 vehicle mount computer (windows ce) user guide about the leds the leds on the cv41 tell the state of the computer. Use this section to learn about the connection and system leds. Connection leds connection led status descriptions led state description wwan soli...

  • Page 25

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 11 system leds system led status descriptions led state description system solid green the cv41 is on, or the cv41 is on but the backlight or display may be off. Blinking green every 4.5 seconds the cv41 is in suspend...

  • Page 26: Cv41 Accessories

    Chapter 1 — about the computer 12 cv41 vehicle mount computer (windows ce) user guide cv41 accessories the cv41 does not ship with any accessories. All accessories are sold and ordered separately. For help, contact your local intermec sales representative. Ups battery solid green (external power pre...

  • Page 27

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 13 canbus y-cable use the canbus y-cable to connect a canbus interface to the cv41. Ups battery purchase a new ups battery when the one in your cv41 does not provide satisfactory operating time. Audio cable use the au...

  • Page 28: About Internal Ups Battery

    Chapter 1 — about the computer 14 cv41 vehicle mount computer (windows ce) user guide about internal ups battery the cv41 contains an internal ups battery that is automatically charged when you place the cv41 in a powered smart dock. The ups battery can power the cv41 for a minimum of 30 minutes at ...

  • Page 29: About The Backup Battery

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 15 2 tap device settings > power management > battery power. The battery power screen appears. 3 adjust the backlight, screen, and device turn off times in the dropdown menus. 4 tap ok when you are finished to save yo...

  • Page 30: Insert An Sd Card

    Chapter 1 — about the computer 16 cv41 vehicle mount computer (windows ce) user guide insert an sd card you can use an sd card to increase file storage and install software. The computer supports an optional 1 to 4 gb maximum capacity sd card. 1 remove the cv41 from the smart dock. 2 press the power...

  • Page 31: About The Touch Screen

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 17 about the touch screen the cv41 comes with an 8-inch color touch screen display with a resolution of 800 x 480 pixels. The display also comes with an optional heater to reduce condensation on the external surface o...

  • Page 32: Enable The Defroster

    Chapter 1 — about the computer 18 cv41 vehicle mount computer (windows ce) user guide enable the defroster if your cv41 contains a defroster, use it to help reduce condensation on an external surface when the computer is moving between sub-freezing and normal temperatures. 1 tap start > settings > c...

  • Page 33: Change The Volume

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 19 change the volume the cv41 can make sounds when you tap the screen or use an attached scanner. You can change the cv41 volume to suit your needs and the environment. 1 on the keypad, tap alt to enable the secondary...

  • Page 34

    Chapter 1 — about the computer 20 cv41 vehicle mount computer (windows ce) user guide 1 using your own hardware, secure the external antenna to a wall, forklift, or other flat surface. 2 secure the antenna to one of the antenna plugs on the cv41. Because system performance and antenna polarization a...

  • Page 35: About The Keypad

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 21 about the keypad the cv41 comes with one standard keypad overlay and contains a backlight for low light conditions. Use the following sections to understand how to use the keypad. If you need to remap the keypad, u...

  • Page 36: Use The Modifier Keys

    Chapter 1 — about the computer 22 cv41 vehicle mount computer (windows ce) user guide use the modifier keys the cv41 keypad provides modifier keys to let you access additional characters, symbols, and functions printed on the keypad overlay. Once you understand how to use the modifier keys and key s...

  • Page 37

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 23 to disable caps lock: • when caps lock is enabled, press the b key, and then the ] key. The shift key led turns off to show that caps lock has been disabled. Enable or disable the keypad backlight the computer has ...

  • Page 38

    Chapter 1 — about the computer 24 cv41 vehicle mount computer (windows ce) user guide set the keypad and display backlight timer the keypad backlight and the display backlight share the same timer. When the display is on, the keypad backlight is also on. Use this section to learn how to set the keyp...

  • Page 39

    Chapter 1 — about the computer cv41 vehicle mount computer (windows ce) user guide 25 to establish a partnership between your cv41 and a pc, you need to physically connect your computer to your pc using a standard usb cable, and a usb cable adapter. To buy the usb cable adapter, contact your local i...

  • Page 40

    Chapter 1 — about the computer 26 cv41 vehicle mount computer (windows ce) user guide.

  • Page 41: Applications

    27 2 understand the user interface and intermec applications use this chapter to learn about the windows embedded ce 6.0 user interface and how to interact with the screen. You can also use this chapter to learn about the intermec applications on your computer, as well as additional intermec applica...

  • Page 42: About The User Interface

    Chapter 2 — understand the user interface and intermec applications 28 cv41 vehicle mount computer (windows ce) user guide about the user interface the user interface for the windows embedded ce 6.0 operating system is similar to previous versions of windows ce. The interface is touch-friendly and e...

  • Page 43: Use The Taskbar

    Chapter 2 — understand the user interface and intermec applications cv41 vehicle mount computer (windows ce) user guide 29 use the taskbar the taskbar is located at the bottom of the screen. It displays the start menu icon, the current time, the input panel icon, and the current status of informatio...

  • Page 44: Use Pop-Up Menus

    Chapter 2 — understand the user interface and intermec applications 30 cv41 vehicle mount computer (windows ce) user guide use pop-up menus use pop-up menus to quickly perform an action on an item. For example, you can use a pop-up menu to delete or make a copy of an item. To access a pop-up menu, t...

  • Page 45: Use Transcriber

    Chapter 2 — understand the user interface and intermec applications cv41 vehicle mount computer (windows ce) user guide 31 use transcriber use transcriber to write anywhere on the screen using the stylus just as you would on paper. You can write an entire sentence of information, and then pause to l...

  • Page 46: Sync to A Local Time Server

    Chapter 2 — understand the user interface and intermec applications 32 cv41 vehicle mount computer (windows ce) user guide sync to a local time server to keep your cv41 time and date running accurately, you can sync it to a local time server through an internet connection. 1 establish an activesync ...

  • Page 47

    Chapter 2 — understand the user interface and intermec applications cv41 vehicle mount computer (windows ce) user guide 33 ispywifi use ispywifi to check your 802.11 status and diagnose issues with the connection. Profile settings use profile settings to easily configure the computer for a specific ...

  • Page 48: About Intermec Launcher

    Chapter 2 — understand the user interface and intermec applications 34 cv41 vehicle mount computer (windows ce) user guide applications you can download for the computer you can download several intermec applications from the website that extend the capabilities of your computer. All of the applicat...

  • Page 49

    Chapter 2 — understand the user interface and intermec applications cv41 vehicle mount computer (windows ce) user guide 35 smartsystems foundation provides a consistent way to manage intermec devices including computers, vehicle mounted computers, rfid readers, printers and bar code scanners, locate...

  • Page 50

    Chapter 2 — understand the user interface and intermec applications 36 cv41 vehicle mount computer (windows ce) user guide.

  • Page 51: Manage The Computer

    37 3 manage the computer use this chapter to learn how to remotely update, configure, and monitor your intermec computers. You will also find information on installing and developing software applications as well as how to upgrade the system software..

  • Page 52

    Chapter 3 — manage the computer 38 cv41 vehicle mount computer (windows ce) user guide manage the computer in your network when you have multiple computers and peripherals in your network, it is essential to have an easy way to manage updates, configure all of the devices, and remotely troubleshoot ...

  • Page 53: Package Your Application

    Chapter 3 — manage the computer cv41 vehicle mount computer (windows ce) user guide 39 the smartsystems foundation console can report on asset locations and battery status, making it easier to manage your devices. With a provisioning license, smartsystems foundation can automatically push software, ...

  • Page 54

    Chapter 3 — manage the computer 40 cv41 vehicle mount computer (windows ce) user guide install applications using smartsystems foundation console you can use the smartsystems console to drag-and-drop intermec applications onto your computer. The console is part of smartsystems foundation. 1 download...

  • Page 55

    Chapter 3 — manage the computer cv41 vehicle mount computer (windows ce) user guide 41 update the intermec content software the computer uses a series of cab files to update the operating system (os), low-level firmware, and intermec content files. Sspb files deliver intermec functionality such as d...

  • Page 56: Foundation

    Chapter 3 — manage the computer 42 cv41 vehicle mount computer (windows ce) user guide 8 press f and then enter to update the os and device firmware. The installer installs the update onto the cv41. When it is finished, the cv41 turns off. 9 remove the usb flash drive and press the power button. The...

  • Page 57

    Chapter 3 — manage the computer cv41 vehicle mount computer (windows ce) user guide 43 5 double-click the smartsystems bundle on your pc to extract the update files to the software vault. 6 from the smartsystems console, locate the bundle to install and drag it to each computer (or group in a folder...

  • Page 58

    Chapter 3 — manage the computer 44 cv41 vehicle mount computer (windows ce) user guide.

  • Page 59: Configure The Computer

    45 4 configure the computer use this chapter to learn about the available methods for configuring your computer and how to use intermec settings. You can also use this chapter to learn how to configure network communications and wireless security..

  • Page 60

    Chapter 4 — configure the computer 46 cv41 vehicle mount computer (windows ce) user guide how to configure the computer you can configure many parameters on the computer such as the bar code symbologies it decodes or the network settings. The values you set for these parameters determine how the com...

  • Page 61: Start Intermec Settings

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 47 start intermec settings intermec settings is located in the control panel. • tap start > settings > control panel > intermec settings. The intermec settings main menu appears. About the structure of intermec se...

  • Page 62

    Chapter 4 — configure the computer 48 cv41 vehicle mount computer (windows ce) user guide data collection menu data collection options parameters you can configure tethered scanner (com 1) • enable scanner port • symbologies • symbology options • scanner settings • scanner port settings • decode sec...

  • Page 63

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 49 bluetooth bluetooth settings (power, discoverable, connectable, and so on) device settings menu device settings options parameters you can configure backlight keypad backlight date and time date and time settin...

  • Page 64

    Chapter 4 — configure the computer 50 cv41 vehicle mount computer (windows ce) user guide note: the printer menu displays settings for bluetooth connected printers. The settings that appear in the menu are dependent on the printer that is paired with the device. The printer needs to be paired using ...

  • Page 65

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 51 smartsystems information menu smartsystems information options parameters you can configure identity identity information (hardware version, firmware version, os version, and so on) (read-only) administrator ad...

  • Page 66

    Chapter 4 — configure the computer 52 cv41 vehicle mount computer (windows ce) user guide for more information on all parameters in intermec settings, see the intermec settings command reference manual . Navigate in intermec settings you can easily navigate intermec settings to find the parameter yo...

  • Page 67

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 53 profile settings screen use intermec settings to determine the profiles you want the end user to see in the profile settings application. 1 go to device settings > profile settings application. 2 select always ...

  • Page 68: Restore Default Settings

    Chapter 4 — configure the computer 54 cv41 vehicle mount computer (windows ce) user guide restore default settings you can easily restore a menu to its default settings or all of the intermec settings parameters to their default settings if necessary. 1 navigate to the menu that you want to restore ...

  • Page 69: Smartsystems Foundation

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 55 on the computer, you can: • hide menu items by tapping and holding the item, and then choosing hide menu item from the popup list. When asked if you want to hide the menu, tap yes. • restore all hidden items in...

  • Page 70: About Network Communications

    Chapter 4 — configure the computer 56 cv41 vehicle mount computer (windows ce) user guide about network communications you can easily add the computer to your wireless or wired data collection network. You can connect your computer using: • 802.11a/b/g radio communications. • bluetooth communication...

  • Page 71

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 57 2 select the radio enabled check box and tap ok. By default, the computer uses funk security and enables dhcp. 3 use intermec settings to configure any other parameters you need to use for communication with yo...

  • Page 72

    Chapter 4 — configure the computer 58 cv41 vehicle mount computer (windows ce) user guide connect to a bluetooth scanner you can connect the computer to an intermec bluetooth scanner, such as the sf51 or sr61. 1 tap start > settings > control panel > bluetooth scanning. 2 tap add device. 3 select qu...

  • Page 73

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 59 connect to a bluetooth printer to configure your computer for bluetooth wireless printing, you need to: • create an application that opens the wireless printing com port on your computer. For help, see the blue...

  • Page 74: Connect to A Usb Scanner

    Chapter 4 — configure the computer 60 cv41 vehicle mount computer (windows ce) user guide connect to a usb scanner when an hid-enabled usb scanner is used with the cv41, any data handling must be programmed into the scanner because the data transmits to an active window as a keystroke message, and b...

  • Page 75

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 61 2 from the intermec settings main menu, select tethered scanner (com 1 or com 2). 3 tap scanner settings. 4 perform one of these items based on the type of scanner you are connecting: • for an sr30 or sr61t sca...

  • Page 76: Create An Isp Connection

    Chapter 4 — configure the computer 62 cv41 vehicle mount computer (windows ce) user guide 6 check the enable scanner port check box and tap ok. Create an isp connection you can create an internet service provider (isp) connection to send and receive email messages using messaging (outlook email) and...

  • Page 77

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 63 5 select the dial-up connection radio button. 6 tap next. 7 if you are using an external modem connected to your computer with a cable, select hayes compatible on com1 from the select a modem list. 8 tap next. ...

  • Page 78

    Chapter 4 — configure the computer 64 cv41 vehicle mount computer (windows ce) user guide 12 on the dialing properties screen, configure your dialing properties and tap ok. 13 enter the user name, password, and domain (if provided by an isp or your network administrator). 14 tap connect. Create a vp...

  • Page 79: About Wireless Security

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 65 about wireless security the computer provides five types of security for your wireless network: • wi-fi protected access 2 (wpa2™) • wi-fi protected access (wpa) • 802.1x • leap • wep this section explains how ...

  • Page 80

    Chapter 4 — configure the computer 66 cv41 vehicle mount computer (windows ce) user guide • if you are primarily using the computer to connect to wi-fi hotspots, you may want to use microsoft security. To use microsoft security, you need to select it as your security choice. For help, see “select mi...

  • Page 81

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 67 5 select the profile you want to configure. 6 for association, choose wpa or wpa2. Encryption automatically defaults to tkip or aes, respectively. 7 for 8021x, choose ttls, peap, eap-fast, or tls. 8 if you choo...

  • Page 82

    Chapter 4 — configure the computer 68 cv41 vehicle mount computer (windows ce) user guide the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the computer internally converts it to a pre-shared key. This value must match the passphrase on the authenticator...

  • Page 83

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 69 configure leap security with funk after you configure the communications and radio parameters on your computer and select funk as your security choice, you can configure leap. 1 start intermec settings. 2 choos...

  • Page 84

    Chapter 4 — configure the computer 70 cv41 vehicle mount computer (windows ce) user guide 9 define a value for the keys you want to use. You can define up to four keys ( key 1 through key 4). Enter an ascii key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the r...

  • Page 85: Select Microsoft Security

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 71 select microsoft security use the following procedure to select microsoft security. 1 start intermec settings. For help, see “start intermec settings” on page 47 . 2 choose communications > 802.11 radio > secur...

  • Page 86

    Chapter 4 — configure the computer 72 cv41 vehicle mount computer (windows ce) user guide f tap ok to save the microsoft security settings. 8 if you choose peap: a load a root certificate of the authentication server on your computer. For help, see “load a certificate” on page 75 . B tap ok to save ...

  • Page 87

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 73 configure 802.1x security with microsoft use the following procedure to configure 802.1x security with microsoft security. Intermec recommends that you use wpa2-802.1x instead of 802.1x-wep if possible. 1 make ...

  • Page 88

    Chapter 4 — configure the computer 74 cv41 vehicle mount computer (windows ce) user guide 10 for network key setting, choose automatic. 11 save your settings. Configure static wep security with microsoft use the following procedure to configure static wep security with microsoft security. Intermec r...

  • Page 89: Load A Certificate

    Chapter 4 — configure the computer cv41 vehicle mount computer (windows ce) user guide 75 load a certificate to use transport layer security (tls) with wpa or 802.1x security, you need a unique client certificate on the computer and a trusted root certificate authority (ca) certificate. Certificates...

  • Page 90

    Chapter 4 — configure the computer 76 cv41 vehicle mount computer (windows ce) user guide f tap ok to close the message box. 4 to import a certificate chain: a tap the import pfx tab. B tap import certificates to install the selected certificate. C in the certimportui screen, tap the button next to ...

  • Page 91: Use The Auto-On Feature

    77 5 use the auto-on feature you can use the auto-on feature to turn on the cv41 when apply external power to the computer..

  • Page 92: About The Auto-On Feature

    Chapter 5 — use the auto-on feature 78 cv41 vehicle mount computer (windows ce) user guide about the auto-on feature the auto-on feature turns on the cv41 when you apply external power to the computer. When auto-on is disabled, the cv41 monitors the ignition input signal and turns on the computer wh...

  • Page 93

    Chapter 5 — use the auto-on feature cv41 vehicle mount computer (windows ce) user guide 79 2 tap the misc tab. 3 make sure that enable auto-on is not selected and tap ok..

  • Page 94

    Chapter 5 — use the auto-on feature 80 cv41 vehicle mount computer (windows ce) user guide.

  • Page 95

    81 6 use wwan and gps communications some configurations of the cv41 come equipped with a wwan radio. With wwan enabled, you can use umts or cdma communications to transmit data through cellular wide-area networks (wans), and use the global positioning system receiver (gps)..

  • Page 96: About Wwan Communications

    Chapter 6 — use wwan and gps communications 82 cv41 vehicle mount computer (windows ce) user guide about wwan communications the cv41 vehicle mount computer has an optional wwan radio that supports both cdma and umts cellular technology. Use either one of these technologies to transmit data through ...

  • Page 97: Activate Cdma Communications

    Chapter 6 — use wwan and gps communications cv41 vehicle mount computer (windows ce) user guide 83 7 connect an external wwan antenna. For more information, see “connect an external antenna” on page 19 . 8 press the power button to resume the cv41 from suspend mode. 9 select start > programs > gobic...

  • Page 98: About Gps

    Chapter 6 — use wwan and gps communications 84 cv41 vehicle mount computer (windows ce) user guide 4 select start > programs > gobicm > gobicmexe. 5 in firmware selection, select your wireless carrier and click update firmware. 6 select the cdma tab, enter *22899 in the activation code field, and ta...

  • Page 99: Enable Screen Blanking

    85 7 enable screen blanking enable screen blanking on your computer to turn off the computer screen while your vehicle is in motion..

  • Page 100: About Screen Blanking

    Chapter 7 — enable screen blanking 86 cv41 vehicle mount computer (windows ce) user guide about screen blanking the cv41 supports screen blanking. When motion is detected, a screen blanking box or switch turns off the computer screen to avoid uneccessary driver distractions. Once the vehicle is stat...

  • Page 101: Tools You Need

    Chapter 7 — enable screen blanking cv41 vehicle mount computer (windows ce) user guide 87 tools you need to install the switch , you need the following parts and tools: • switch • mounting hardware and tools • custom serial cable create a custom serial cable to install the switch , you need to creat...

  • Page 102: Enable Screen Blanking

    Chapter 7 — enable screen blanking 88 cv41 vehicle mount computer (windows ce) user guide install switch for screen blanking this section explains how mount, connect, and enable the switch for screen blanking. 1 using your own mounting hardware, secure the switch sensor to the vehicle. 2 connect the...

  • Page 103

    89 8 troubleshoot and maintain the computer if you encounter any problems while using the computer, look in this chapter to find a possible solution. You will also find information on routine maintenance..

  • Page 104: About The Intermec Dashboard

    Chapter 8 — troubleshoot and maintain the computer 90 cv41 vehicle mount computer (windows ce) user guide about the intermec dashboard the intermec dashboard is designed to provide proactive monitoring of your mobile computers to prevent downtime. You can easily see the health of the device and can ...

  • Page 105

    Chapter 8 — troubleshoot and maintain the computer cv41 vehicle mount computer (windows ce) user guide 91 the computer is connected to the network and you move to a new site to collect data. Your computer now shows you are not connected to the network. Move closer to an access point or to a differen...

  • Page 106: Troubleshoot 802.1X Security

    Chapter 8 — troubleshoot and maintain the computer 92 cv41 vehicle mount computer (windows ce) user guide troubleshoot 802.1x security use the following table to troubleshoot problems with your 802.1x security that will prevent you from connecting to your network, such as an incorrect password. Chec...

  • Page 107

    Chapter 8 — troubleshoot and maintain the computer cv41 vehicle mount computer (windows ce) user guide 93 follow the next procedure to verify available access points and networks, check signal strength, and view other diagnostics. If you need to contact intermec product support, this information can...

  • Page 108

    Chapter 8 — troubleshoot and maintain the computer 94 cv41 vehicle mount computer (windows ce) user guide 5 tap the rssi tab to view the received signal strength of the host signal. The information box includes the current signal strength, host ssid name, mac address, data rate, and transmit power. ...

  • Page 109

    Chapter 8 — troubleshoot and maintain the computer cv41 vehicle mount computer (windows ce) user guide 95 when you release a scan button or handle trigger, the good read light does not turn off. The good read light remains on if you configure the computer to use continuous/edge triggering. If you co...

  • Page 110

    Chapter 8 — troubleshoot and maintain the computer 96 cv41 vehicle mount computer (windows ce) user guide troubleshoot operating the computer use this section to troubleshoot problems that may prevent you from being able to operate the computer. You scan a valid bar code label to enter data for your...

  • Page 111: Call Product Support

    Chapter 8 — troubleshoot and maintain the computer cv41 vehicle mount computer (windows ce) user guide 97 call product support if you cannot find the answer to your problem in the “troubleshooting the computer” section, you can visit the intermec technical knowledge base (knowledge central) at inter...

  • Page 112: Reset The Computer

    Chapter 8 — troubleshoot and maintain the computer 98 cv41 vehicle mount computer (windows ce) user guide find your operating system version use the following procedure to find the os version of your computer. • tap start > settings > control panel > about. The os version is displayed in the version...

  • Page 113: Clean Boot The Computer

    Chapter 8 — troubleshoot and maintain the computer cv41 vehicle mount computer (windows ce) user guide 99 clean boot the computer in some cases where the computer completely stops responding, it may be necessary to perform a clean boot. Because clean booting may result in data loss, use this method ...

  • Page 114: Replace The Fuse

    Chapter 8 — troubleshoot and maintain the computer 100 cv41 vehicle mount computer (windows ce) user guide 3 press the ups battery disconnect button located below the sim card slot. 4 reinstall the sim card access panel and tighten the screws to a torque to a value of 4-5 in/lbs. Once power external...

  • Page 115: Clean The Computer

    Chapter 8 — troubleshoot and maintain the computer cv41 vehicle mount computer (windows ce) user guide 101 clean the computer to keep the computer in good working order, you may need to clean the touch screen. Clean the touch screen as often as needed for the environment in which you are using the c...

  • Page 116

    Chapter 8 — troubleshoot and maintain the computer 102 cv41 vehicle mount computer (windows ce) user guide.

  • Page 117

    103 a specifications and default settings.

  • Page 118: Physical Dimensions

    Appendix a — specifications and default settings 104 cv41 vehicle mount computer (windows ce) user guide physical and environmental specifications physical dimensions environmental specifications power and electrical specifications cv41 dimensions 21.4 x 26.8 x 4.3 /6.6 cm (8.4 x 10.6 x 1.7/2.6 in) ...

  • Page 119: Hardware

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 105 hardware standard communications • 802.11a/b/g • wwan (optional and only available in north america, europe, and australia) • bluetooth • usb • serial touch screen 20 cm (8 in) color wvga 800 x 4...

  • Page 120: Wireless Lan

    Appendix a — specifications and default settings 106 cv41 vehicle mount computer (windows ce) user guide wireless lan default configuration the following tables list the default values of the configuration settings supported on the computer. If you restore the computer to factory default settings, t...

  • Page 121

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 107 codabar disable codablock a disable codablock f disable code 11 disable code 39 enable code 93 disable code 128/gs1-128 enable code 128, gs1-128, gs1-128 identifier datamatrix enable dutchpost di...

  • Page 122

    Appendix a — specifications and default settings 108 cv41 vehicle mount computer (windows ce) user guide symbology option settings symbology option settings default value preamble none (disable) postamble none (disable) symbology identifier disable multicode disable scanner settings scanner settings...

  • Page 123: Communications

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 109 communications use communications settings to configure how the computer communicates with the network. Device settings use device settings to configure settings on the computer. Communications s...

  • Page 124

    Appendix a — specifications and default settings 110 cv41 vehicle mount computer (windows ce) user guide heater settings screen setting default value screen heater enabled screen heater turns off at 0°c keypad settings keypad setting default value caps lock on reboot disabled power management settin...

  • Page 125

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 111 core messaging service settings use core messaging service settings to configure the message routers between client and server software applications. Screen settings screen settings default value...

  • Page 126: Device Monitor Settings

    Appendix a — specifications and default settings 112 cv41 vehicle mount computer (windows ce) user guide device monitor settings use device monitor settings to configure how the computer monitors the network. Rfid settings use rfid settings to enable the rfid service. Virtual wedge settings use virt...

  • Page 127: Port Pin Assignments

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 113 port pin assignments use this section to learn about the ports pin assignments on the cv41, smart dock, and cables. Com 1 and com 2 ports the com 1 and com 2 ports are located on the smart dock. ...

  • Page 128: Usb Port

    Appendix a — specifications and default settings 114 cv41 vehicle mount computer (windows ce) user guide usb port the usb port is located on the back of the smart dock. Usb port pin signal description 1 gnd common ground 2 usbc_d+ usb client data signal 3 usbc_d- usn client data signal 4 usb_h1_pwr ...

  • Page 129: Canbus/audio Port

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 115 canbus/audio port the cv41 canbus and audio port is located on the smart dock. The cv41 cannot support canbus and audio simultaneously. Canbus/audio port pin signal description 1 - can reserved 2...

  • Page 130: Power Supply Connector

    Appendix a — specifications and default settings 116 cv41 vehicle mount computer (windows ce) user guide power supply connector power is supplied from the smart dock to the cv41 through the power connector. The power supply connector also provides a connection point for the vehicle chassis ground to...

  • Page 131: Usb Dongle Cable

    Appendix a — specifications and default settings cv41 vehicle mount computer (windows ce) user guide 117 usb dongle cable use the usb dongle cable to connect usb devices, such as a usb flash drive to the smart dock and cv41. Usb dongle cable d9 male connector pin signal description 1 gnd common grou...

  • Page 132

    Appendix a — specifications and default settings 118 cv41 vehicle mount computer (windows ce) user guide 8 usb_h1_d- usb host 1 data signal 9 usbc_vbus usb client 5 v detect from attached host usb dongle cable host connector pin signal description 1 5v_usb usb power, current limited 2 usb2n_a usb d-...

  • Page 133: Keypads and Keystrokes

    119 b keypads and keystrokes.

  • Page 134: Standard Characters

    Appendix b — keypads and keystrokes 120 cv41 vehicle mount computer (windows ce) user guide standard characters use the following tables to learn how to enter standard and other available characters and functions with the keypad. If there is no sequence of keystrokes for a particular character or fu...

  • Page 135

    Appendix b — keypads and keystrokes cv41 vehicle mount computer (windows ce) user guide 121 t t u u v v w w x x y y z z cv41 function keys to enter keypad f1 ¡ f2 ¢ f3 £ f4 ¤ f5 ¥ f6 ¦ f7 § f8 ¨ f9 © f10 ª f11 b ¡ f12 b ¢ f13 b £ f14 b ¤ f15 b ¥ cv41 alphanumeric characters (continued) to enter keyp...

  • Page 136

    Appendix b — keypads and keystrokes 122 cv41 vehicle mount computer (windows ce) user guide f16 b ¦ f17 b § f18 b ¨ f19 b © f20 b ª f21 alt ¡ f22 alt ¢ f23 alt £ f24 alt ¤ cv41 special keys to enter keypad * (asterik) b * @ (at symbol) b w # (pound) b # & (ampersand) b & % (percentage) b % : (colon)...

  • Page 137

    Appendix b — keypads and keystrokes cv41 vehicle mount computer (windows ce) user guide 123 + (plus) b 8 ‘ (apostrophe) b h = (equals) b 2 _ (underscore) b m ^ (caret) b u > (greater than) b v b c ( (left parenthesis) b o ) (right parenthesis) b p [ (left square bracket) b b ] (right square bracket)...

  • Page 140

    Appendix b — keypads and keystrokes 126 cv41 vehicle mount computer (windows ce) user guide.

  • Page 141

    127 c scanngo wi-fi configuration bar codes you can use the scanngo wi-fi configuration bar codes to quickly configure the 802.11 radio in your computer..

  • Page 142: 2D Configuration Bar Codes

    Appendix c — scanngo wi-fi configuration bar codes 128 cv41 vehicle mount computer (windows ce) user guide radio configuration bar codes use the following scanngo bar codes to enable the 802.11 radio and set the defaults for either funk security or microsoft security. After you scan the bar codes, y...

  • Page 143: 1D Configuration Bar Codes

    Appendix c — scanngo wi-fi configuration bar codes cv41 vehicle mount computer (windows ce) user guide 129 1d configuration bar codes you can configure the computer with a 1d imager. 1 scan the start here bar code from the table and wait for the program to start. 2 scan the 1/9 bar code. 3 scan the ...

  • Page 144

    Appendix c — scanngo wi-fi configuration bar codes 130 cv41 vehicle mount computer (windows ce) user guide 1d imager radio configuration bar codes when you want to: scan this bar code • set all communication settings to defaults (wi-fi, wwan if applicable) • enable wi-fi - set funk security to defau...

  • Page 145

    Appendix c — scanngo wi-fi configuration bar codes cv41 vehicle mount computer (windows ce) user guide 131 • set all communication settings to defaults (wi-fi, wwan if applicable) • enable wi-fi - set funk security to defaults 1d imager radio configuration bar codes (continued) when you want to: sca...

  • Page 146

    Appendix c — scanngo wi-fi configuration bar codes 132 cv41 vehicle mount computer (windows ce) user guide • set all communication settings to defaults (wi-fi, wwan if applicable) • enable wi-fi - set microsoft security to defaults 1d imager radio configuration bar codes (continued) when you want to...

  • Page 147

    Appendix c — scanngo wi-fi configuration bar codes cv41 vehicle mount computer (windows ce) user guide 133 • set all communication settings to defaults (wi-fi, wwan if applicable) • enable wi-fi - set microsoft security defaults 1d imager radio configuration bar codes (continued) when you want to: s...

  • Page 148

    Appendix c — scanngo wi-fi configuration bar codes 134 cv41 vehicle mount computer (windows ce) user guide.

  • Page 150

    Worldwide headquarters 6001 36th avenue west everett, washington 98203 u.S.A. Tel 425.348.2600 fax 425.355.9551 www.Intermec.Com © 2012 intermec technologies corporation. All rights reserved. Cv41 vehicle mount computer (windows ce) user guide *934-066-002* p/n 934-066-002.