- DL manuals
- Intermec
- Adapter
- Ethernet Adapter
- User Manual
Intermec Ethernet Adapter User Manual
Summary of Ethernet Adapter
Page 1
Intermec ethernet adapter p/n 068749-003 user’s manual.
Page 2
Intermec technologies corporation 6001 36th avenue west p.O. Box 4280 everett, wa 98203-9280 u.S. Service and technical support: 1.800.755.5505 u.S. Media supplies ordering information: 1.800.227.9947 canadian service and technical support: 1.800.688.7043 canadian media supplies ordering information...
Page 3
Iii manual change record this page records the changes to this manual. The manual was originally released as version 001. Version date description of change 002 2/99 added information on the internal ethernet adapter part no. 069227 and a procedure for printing a test label in data line print mode. ...
Page 5: Contents
Contents v contents before you begin xi warranty information xi safety summary xi warnings, cautions, and notes xii about this manual xii introducing the ethernet adapter overview 1-3 physical description 1-4 computer environments 1-5 installing and integrating 1-6 configuring and managing 1-6 featu...
Page 6: Network
Intermec ethernet adapter user’s manual vi setting up the ethernet adapter for a netware network setting up your ethernet adapter using ndps 3-3 printing methods 3-4 print server mode 3-4 remote printer mode 3-4 advanced installation using axis netpilot 3-4 setting up the ethernet adapter for a wind...
Page 7: Network
Contents vii setting up the ethernet adapter for an os/2 network using the axis print utility for os/2 5-3 integrating your ethernet adapter into the os/2 environment 5-4 creating a print queue 5-4 sharing the print queue 5-4 setting up the ethernet adapter for a macintosh network installing using t...
Page 8: Updating The Software
Intermec ethernet adapter user’s manual viii managing and configuring the ethernet adapter introduction 8-3 using a web browser to manage and configure the ethernet adapter 8-4 using axis netpilot to manage and configure the ethernet adapter 8-6 starting axis netpilot 8-7 changing the parameter valu...
Page 9: Configuration Parameters
Contents ix updating the flash memory 9-3 updating using the axis netpilot 9-4 upgrading over the network using ftp 9-4 configuration parameters changing the configuration parameters a-3 using axis netpilot a-3 using a web browser a-3 using ftp a-3 using ftp for unix, windows, and os/2 workstations ...
Page 11: Before You Begin
Before you begin xi before you begin this section introduces you to standard warranty provisions, safety precautions, warnings and cautions, document formatting conventions, and sources of additional product information. A documentation roadmap is also provided to guide you in finding the appropriat...
Page 12: About This Manual
Intermec ethernet adapter user’s manual xii warnings, cautions, and notes the warnings, cautions, and notes in this manual use the following format. Warning a warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious inju...
Page 13
Before you begin xiii what you will find in this manual this table summarizes the information in each chapter of this manual: chapter description chapter 1 gives an overview of how to use the ethernet adapter and lists features and benefits. Chapter 2 explains how to attach the ethernet adapter to y...
Page 14
Intermec ethernet adapter user’s manual xiv format conventions for input from a keyboard this table describes the formatting conventions for input from pc or host computer keyboards: convention description special text shows the command as you should enter it into the reader. See “format conventions...
Page 15
Before you begin xv other intermec manuals you may need additional information when working with the ethernet adapter in a data collection system. Please visit our web site at www.Intermec.Com to access many of our current manuals in pdf format. To order printed versions of the intermec manuals, con...
Page 17
Introducing the ethernet adapter 1.
Page 19: Overview
Code39 code39 introducing the ethernet adapter 1-3 1 this chapter gives an overview of how and where to use your ethernet adapter and explains the features of your ethernet adapter. Overview the external ethernet adapter, part no. 068788, and the internal ethernet adapters, part no. 068789 and 06922...
Page 20: Physical Description
Intermec ethernet adapter user’s manual code39 code39 1-4 physical description external ethernet adapter 10baset connector external power supply connector power led network led parallel port connector test button axisi.001 + internal ethernet adapter o i network led power led test button 10baset con...
Page 21: Computer Environments
Code39 code39 introducing the ethernet adapter 1-5 1 physical description (continued) part function 10baset connector connects the ethernet adapter to a 10 mbps ethernet network via a 10baset cable. Parallel port connector (external ethernet adapter only) provides the external ethernet adapter with ...
Page 22: Installing and Integrating
Intermec ethernet adapter user’s manual code39 code39 1-6 installing and integrating you need the appropriate axis client software, which comes with your adapter, to install and integrate the ethernet adapter: • axis netpilot (netware) • axis print monitor (windows 95 or 98) • axis print utility for...
Page 23: Using The Test Button
Code39 code39 introducing the ethernet adapter 1-7 1 features and benefits (continued) monitoring the provided axis netpilot software and the ethernet adapter’s internal web pages allow you to continuously monitor printer status. The axis print monitor for windows 95, 98, and nt can be configured to...
Page 24
Intermec ethernet adapter user’s manual code39 code39 1-8 print quality label *picket-field *supplier* *picket-field* *picket-field* *picket field* *picket field* *picket field* *supplier* intermec intermec corporation everett, wa 98203 model 3440 prog 063755 version 1.4.3 code 39 3.0 / 1 code 39 2....
Page 25
Code39 code39 introducing the ethernet adapter 1-9 1 to print a parameter list • if you have firmware version 5.59 or higher, press the test button twice. Axis 540+/542+ v5.56 jun 3 1998 s/n: 00408c353354 tcp/ip: enabled ip address: 999. 999. 999. 999 wins: enabled status: not registered name: axis3...
Page 26
Intermec ethernet adapter user’s manual code39 code39 1-10 4. Release the test button and wait at least five led flashes. 5. Press and hold the test button again until the network led remains constantly lit. Restart the ethernet adapter by turning it off and on. The ethernet adapter is now reset to ...
Page 27
Connecting the ethernet adapter 2.
Page 29
Code39 code39 connecting the ethernet adapter 2-3 2 this chapter explains how to connect your ethernet adapter to your network and how to install and integrate your ethernet adapter in your network environment. This chapter also explains how to set up your ethernet adapter for tcp/ip. Connecting the...
Page 30: Installation Summary
Intermec ethernet adapter user’s manual code39 code39 2-4 guide to installing the ethernet adapter on your network (continued) network installation procedure netware to install the ethernet adapter with ndps , see “setting up your ethernet adapter using ndps” in chapter 3. To install the ethernet ad...
Page 31: Using Axis Netpilot
Code39 code39 connecting the ethernet adapter 2-5 2 setting up with axis netpilot axis netpilot is part of the axis print utilities, which comes on the cd-rom or disks shipped with your ethernet adapter. Axis netpilot runs on any of the windows platforms: • windows 3.1 • windows 95 • windows 98 • wi...
Page 32
Intermec ethernet adapter user’s manual code39 code39 2-6 axis netpilot installation wizard the axis installation wizard guides you through the installation and asks for the relevant information concerning your network environment. For more information about axis netpilot, see “using axis netpilot t...
Page 33: Setting Up For Tcp/ip
Code39 code39 connecting the ethernet adapter 2-7 2 ip address during the axis installation wizard, you can choose the method the ethernet adapter employs for obtaining an ip address. Dynamic host configuration protocol (dhcp), address resolution protocol (arp), reverse address resolution protocol (...
Page 34: Downloading The Ip Address
Intermec ethernet adapter user’s manual code39 code39 2-8 downloading the ip address you can set the ip address of the ethernet adapter by using dhcp, arp, rarp, or bootp. All methods are enabled by default. If you want to disable any of the methods, you can do so when installing the ethernet adapte...
Page 35
Code39 code39 connecting the ethernet adapter 2-9 2 using dhcp in windows 1. Edit or create a scope in the dhcp manager of the dhcp daemon. This scope should contain the following parameters: • range of ip addresses • subnet mask • default router ip address • wins server ip address(es) • netbios ove...
Page 36
Intermec ethernet adapter user’s manual code39 code39 2-10 the host will return reply from 192.168.3.191 ... Or a similar message. This reply indicates that the address has been set and communications established. Using arp in unix • type the following command: arp -s host_name nn:nn:nn:nn:nn:nn tem...
Page 37
Code39 code39 connecting the ethernet adapter 2-11 2 where: nn:nn:nn:nn:nn:nn is the ethernet adapter’s ethernet address. Host_name is the name mapped to the ethernet adapter’s ip address. For more information about mapping a host name to the ip address, see “assigning a host name to the ip address”...
Page 38: Installing The Lpr Spooler
Intermec ethernet adapter user’s manual code39 code39 2-12 2. Update, if necessary, your host table and alias name databases as required by your system. 3. If it is not already running, start the bootp daemon, typically by using the command bootpd . 4. Restart the ethernet adapter to download the ip...
Page 39: Printing A Test Label
Code39 code39 connecting the ethernet adapter 2-13 2 8. Fill out the dialog box: local spool file : name remote queue name : prx remote host name : xxx.Xxx.X.Xxx where: name is the name of the printer. Prx is the logical printer. Xxx.Xxx.X.Xxx is the ip address for the ethernet adapter. 9. Click ok....
Page 40
Intermec ethernet adapter user’s manual code39 code39 2-14 you need to complete the following installation processes before you can print the test label: • install the ethernet adapter in your network. • download the ip address for the ethernet adapter. For help, see “downloading the ip address” ear...
Page 41
Code39 code39 connecting the ethernet adapter 2-15 2 5. Open the intermec folder and select test_lbl. 6. Click ok. 7. Select the printer you want to print to and click ok. To print the test label using an ftp session 1. Insert the disks or cd-rom that came with the ethernet adapter into the appropri...
Page 43: Netware Network
Setting up the ethernet adapter for a netware network 3.
Page 45
Code9 code9 setting up the ethernet adapter for a netware network 3-3 3 this chapter explains how to install, configure, and manage your ethernet adapter in a netware network. Setting up your ethernet adapter using ndps the ethernet adapter supports novell distributed print services (ndps), which is...
Page 46: Printing Methods
Intermec ethernet adapter user’s manual code39 code39 3-4 printing methods the following overview explains the advantages and limitations of the two supported netware printing methods. Print server mode the ethernet adapter logs into a file server(s) and repeatedly polls the print queues for print j...
Page 47
Setting up the ethernet adapter for a netware network 3-5 3 netware network environment window for netware version 3.X, the ethernet adapter periodically updates the configuration by searching the nds tree or the file servers in the case. To connect a print queue 1. Select the adapter port you want ...
Page 48
Intermec ethernet adapter user’s manual 3-6 3. Select the location of the print queue from the resources box. 4. Select an existing netware print queue for connection to the server port then go to step 7. If you want to create a print queue, click create queue and go to step 5. 5. Type the queue nam...
Page 49: Windows Network
Setting up the ethernet adapter for a windows network 4.
Page 51: About The Axis Print Monitor
Setting up the ethernet adapter for a windows network 4-3 4 this chapter describes how to use the axis print utilities for printing in the windows environment. Using the axis print monitor for windows 95, 98, and nt the axis print monitor is supplied on the cd-rom or disks that are provided with you...
Page 52
Intermec ethernet adapter user’s manual 4-4 client/server printing do not enable pop-up messages on the server as the status of shared printers will not be reported to the client platforms. Pop-up messages are only issued on the server. User dialog although the axis print monitor user dialog varies ...
Page 53
Setting up the ethernet adapter for a windows network 4-5 4 to install printer ports with tcp/ip note: to be able to print using lpr, you must install the ethernet adapter in the tcp/ip environment. For help, see “setting up for tcp/ip” in chapter 2. 1. To start the add printer wizard, select settin...
Page 54
Intermec ethernet adapter user’s manual 4-6 16. Configure the port as described in step 7. 17. Click the apply button. The ethernet adapter printer port is now installed. Using the axis print monitor with windows nt 4.0 follow the next procedure to install axis printer ports from a windows nt 4.0 wo...
Page 55
Setting up the ethernet adapter for a windows network 4-7 4 to install printer ports with tcp/ip note: to be able to print using lpr, you must install the ethernet adapter in the tcp/ip environment. For help, see “setting up for tcp/ip” in chapter 2. 1. To start the add printer wizard, select settin...
Page 56
Intermec ethernet adapter user’s manual 4-8 using the axis print monitor with windows nt 3.5x follow the next procedure to install axis printer ports from a windows nt 3.5x workstation. To install printer ports with netbios or netbeui 1. Open the print manager and select create printer from the prin...
Page 57
Setting up the ethernet adapter for a windows network 4-9 4 7. Select axis port from the list of available print monitors in the print destination dialog box. Click ok. 8. Select lpr (tcp/ip) as your choice of network protocol and click ok. 9. From the add lpr port dialog box, enter the ip address o...
Page 58
Intermec ethernet adapter user’s manual 4-10 using the microsoft lpd monitor with windows nt 4.0 this section describes how to set up windows nt server version 4.0 for lpr printing. To prepare for lpr/lpd printing 1. Open the control panel and click the network icon. 2. Select protocols. 3. Add tcp/...
Page 59
Setting up the ethernet adapter for a windows network 4-11 4 using the microsoft lpd monitor with windows nt 3.5x this section describes how to set up windows nt server versions 3.5 and 3.51 for lpd printing. To install the tcp/ip protocol stack 1. In the control panel, select network. 2. Click add ...
Page 60
Intermec ethernet adapter user’s manual 4-12 setting up the ethernet adapter to use an lpr spooler if you are using an lpr spooler to print via tcp/ip, follow the next instructions to install your ethernet adapter with the lpr spooler. For help installing the lpr spooler, see “installing the lpr spo...
Page 61
Setting up the ethernet adapter for a windows network 4-13 4 about axis print utility for windows axis print utility for windows is a dual purpose application for network printing in the windows environment. It has two fundamental purposes: • install and maintain ethernet adapter printer ports as wi...
Page 62
Intermec ethernet adapter user’s manual 4-14 note: when using client/server mode, other users may still install the axis print utility for windows software to print in peer-to-peer mode. When using client/server mode, it is recommended that you set up the server only on a windows for workgroups work...
Page 63
Setting up the ethernet adapter for a windows network 4-15 4 to set up the server for client/server printing note: in order to print to a network printer, windows 3.1 requires the installation of network support, such as the lan server or lan manager workstation software. 1. Choose a workstation tha...
Page 64
Intermec ethernet adapter user’s manual 4-16 windows clients using lantastic from any windows client, the ethernet adapter may also be used for network printing within lantastic environments. Lantastic users may use the axis utilities in exactly the same manner as described in the preceding windows ...
Page 65: Os/2 Network
Setting up the ethernet adapter for an os/2 network 5.
Page 67
Setting up the ethernet adapter for an os/2 network 5-3 5 this chapter describes how to set up your ethernet adapter for printing in the os/2 environment. Using the axis print utility for os/2 the installation and setup operations are performed with the axis print utility for os/2. You should instal...
Page 68: Environment
Intermec ethernet adapter user’s manual 5-4 integrating your ethernet adapter into the os/2 environment to use your ethernet adapter on an os/2 network, you have to create a print queue for the printer and adapter. After you have created the print queue, you can make the print queue a shared resourc...
Page 69
Setting up the ethernet adapter for an os/2 network 5-5 5 where: queue_name is the name of the queue created. To share a printer resource when using os/2 warp with ibm peer service 1. Click the right mouse button on the printer object. 2. Select share and then start sharing. In the dialogue box, ent...
Page 71: Macintosh Network
Setting up the ethernet adapter for a macintosh network 6.
Page 73: Setting Parameters
Setting up the ethernet adapter for a macintosh network 6-3 6 this chapter describes how to set up your ethernet adapter for printing in the appletalk environment. Installing using the chooser window to perform the basic configuration in the apple ethertalk environment, open the chooser window and s...
Page 74
Intermec ethernet adapter user’s manual 6-4 6. Write a text file containing the following: binary : yes binary_type : tbcp int_addr : 192.168.3.191 the binary parameter can take the values yes or no. The binary_type parameter can take the values bcp or tbcp. See the technical reference for more info...
Page 75: Unix Network
Setting up the ethernet adapter for a unix network 7.
Page 77
Setting up the ethernet adapter for a unix network 7-3 7 this chapter explains how to use axinstall to configure your ethernet adapter. Integrating into the host printer spooler having performed the basic tcp/ip setup procedures in chapter 2, you are now able to print in interactive mode using lpr (...
Page 78
Intermec ethernet adapter user’s manual 7-4 the axinstall script has now been downloaded to your host. Execute the script with this command: sh axinstall follow the step-by-step procedure through the installation. During the installation you will be asked to select a print method; we suggest you cho...
Page 79: Line Printer Daemon
Setting up the ethernet adapter for a unix network 7-5 7 data paths taken by unix print methods file to print print spooler filter/ interface model parallel port directly connected printer pros print daemon named pipe ftp pros b lpd rtelnet pros a printer ethernet adapter direct ftp rtelnet axisi.00...
Page 80: Reverse Telnet
Intermec ethernet adapter user’s manual 7-6 pros a advantages the ethernet adapter appears as a device to the system. This makes all filter and model options available. It provides accounting and status logging and supports bi-directional printing. You can view the printer information read back in a...
Page 81: Customizing Your Printing
Setting up the ethernet adapter for a unix network 7-7 7 customizing your printing the ethernet adapter can alter the print data to match the type of printer you are using, so that you can use your desired print format on any type of printer. You can invoke the following actions from the ethernet ad...
Page 82: Substituting Strings
Intermec ethernet adapter user’s manual 7-8 you can choose from several different filters within the pr1_cset character set conversion. For more information, see appendix a, “configuration parameters.” the output from the conversion filter is always ibm pc set 2 (code page 437), which you should set...
Page 83
Setting up the ethernet adapter for a unix network 7-9 7 where: 01 is the match string count byte (length of the match string) 0a is the match string 02 is the substitute count byte 0d 0a is the substitute string this is the default setting for logical printers pr5 through pr8. Example 2 to replace ...
Page 84: Reading Back Information
Intermec ethernet adapter user’s manual 7-10 the postscript font can be any font that is installed in the printer; if no font is specified, courier will be used. Example: the following entries are needed in your configuration file to set up logical printer number 2 for ascii to postscript conversion...
Page 85
Managing and configuring the ethernet adapter 8.
Page 87: Introduction
Managing and configuring the ethernet adapter 8-3 8 this section describes how you can change the ethernet adapter’s parameter values. Introduction choose the method you use to manage and configure your ethernet adapter based on the operating system protocols used in your network. This section cover...
Page 88: Ethernet Adapter
Intermec ethernet adapter user’s manual 8-4 using a web browser to manage and configure the ethernet adapter once you have established the ethernet adapter in the tcp/ip environment, you can access the ethernet adapter’s web pages from any standard web browser. To access the home page of the etherne...
Page 89
Managing and configuring the ethernet adapter 8-5 8 the home page of your ethernet adapter appears in your browser. You can access links to the following services from the home page of the ethernet adapter. Service description from within the configuration pages you can • modify configuration parame...
Page 90: Ethernet Adapter
Intermec ethernet adapter user’s manual 8-6 home page services (continued) service description the management page allows you to reset the adapter and set the parameters to the factory default values. You may also view basic information about your ethernet adapter, such as the current software versi...
Page 91: Starting Axis Netpilot
Managing and configuring the ethernet adapter 8-7 8 starting axis netpilot to start axis netpilot just click the netpilot icon in the folder where you installed axis netpilot on your host computer. Changing the parameter values from axis netpilot you can change the adapter properties in two differen...
Page 92
Intermec ethernet adapter user’s manual 8-8 to open and edit a property page 1. Select the ethernet adapter from the “network print servers” folder. 2. Click the properties button on the axis netpilot toolbar or select properties from the setup menu. 3. Select the tab that includes the parameter val...
Page 93: Monitoring Printers
Managing and configuring the ethernet adapter 8-9 8 to use the parameter list editor 1. Start the parameter list editor by selecting parameter list from the setup menu. 2. Upload a configuration file from an adapter or from your hard disk by selecting from file or from print server and click the loa...
Page 94: Finding Printer Information
Intermec ethernet adapter user’s manual 8-10 monitoring printers (continued) grouping logically connected adapters for the purpose of simplifying administration of the ethernet adapter, the axis netpilot allows you to create groups of adapters. The adapters comprising each group appear in the axis n...
Page 95
Managing and configuring the ethernet adapter 8-11 8 printer information window the printer information is also displayed in the summary window of every ethernet adapter connected to a printer..
Page 96
Intermec ethernet adapter user’s manual 8-12 using ftp to manage and configure the ethernet adapter after you have assigned an ip address to the ethernet adapter, you can use ftp to view or edit the following files: • the configuration file • the status file • the account file editing the configurat...
Page 97: Viewing The Status File
Managing and configuring the ethernet adapter 8-13 8 226 transfer complete. 8588 bytes received in 0.24 seconds (35.63 kbytes/s) ftp> config config 200 port command successful. 150 opening data connection for config (192,36,253,4,13,223), (mode ascii). 226 transfer complete. 8588 bytes received in 0...
Page 98: Ethernet Adapter
Intermec ethernet adapter user’s manual 8-14 note: type help instead of get account to see a list of all available files and commands. 4. View the account file using your preferred text editor. Using telnet to manage and configure the ethernet adapter after you have assigned an ip address to the eth...
Page 99: Viewing The Status File
Managing and configuring the ethernet adapter 8-15 8 current account file: job user prot lpr s bytes etime otime 1 thomas ftp pr2 c 1885 2 0 2 joe lpt pr1 c 23074 4 0 3 richard pserver pr2 c 43044 5 0 4 macuser apple pr1 c 6717 2 0 5 lslm_user netbios pr2 c 36995 3 0 6 patrick pros pr5 p 83208 9 0 r...
Page 100: System Requirements For Snmp
Intermec ethernet adapter user’s manual 8-16 using snmp to manage and configure the ethernet adapter you may use snmp for remote monitoring of the ethernet adapter. All major functions applicable to adapters are supported. Snmp actually refers to a set of standards for network management, including ...
Page 101: The Ethernet Adapter
Managing and configuring the ethernet adapter 8-17 8 using hp administration tools to manage and configure the ethernet adapter the ethernet adapter is fully compatible with the hp jetadmin and the hp web jetadmin printer management software. This means that you may use either tool to install and co...
Page 102: Notification
Intermec ethernet adapter user’s manual 8-18 printer status (continued) notification using the netware administrator, you may also enable or disable status notification messages for printers connected to the ethernet adapter, such as busy, off-line, out of paper, or paper jam. Print job owners and c...
Page 103
Managing and configuring the ethernet adapter 8-19 8 print layout (continued).
Page 105: Updating The Software
Updating the software 9.
Page 107: Obtaining Updated Software
Updating the software 9-3 9 this chapter explains how to update the software on your ethernet adapter. Obtaining updated software you can update the following software: • axis netpilot configuration software • axis print monitor for windows 95, 98, and nt • axis print utility for windows • axis prin...
Page 108
Intermec ethernet adapter user’s manual 9-4 the preferred methods are described in this chapter. Note: updating instructions are also supplied with the software update. Updating using the axis netpilot an installation wizard is available to guide you through the necessary procedures. Simply click on...
Page 109: Configuration Parameters
Configuration parameters a.
Page 111: Using Axis Netpilot
Configuration parameters a-3 a this appendix provides an overview of the ethernet adapter’s parameters and describes how they may be edited. A sample configuration file is also included. However, please note that because of recent print server software updates, some differences may exist between the...
Page 112
Intermec ethernet adapter user’s manual a-4 5. Download the configuration file by typing put config config . Note: specify the edited file name in block capitals. Otherwise, the edits are regarded as temporary and will be lost once the ethernet adapter has been powered down. Using ftp for macintosh ...
Page 113
Configuration parameters a-5 a sample configuration parameters (continued) dhcp_enb. : yes dhcp protocol enabled bootp_enb. : yes bootp protocol enabled rarp_enb. : yes rarp protocol enabled wins_enb. : yes wins protocol enabled wins_addr1. : 0 0 0 0 the ip address of the primary wins server wins_ad...
Page 114
Intermec ethernet adapter user’s manual a-6 sample configuration parameters (continued) conf_check_delay. : 300 interval between automatic configuration checks fr_802_3. : yes ieee 802.3 frame type enabled fr_eth_2. : yes ethernet ii frame type enabled fr_802_2. : yes ieee 802.2 frame type enabled f...
Page 115
Configuration parameters a-7 a sample configuration parameters (continued) lprint_4. : printer 4 name llogic_4. : pr4 (pr1, pr2, pr3, pr4, pr5, pr6, pr7, pr8, lpt1) printer 4 logical printer lprint_5. : printer 5 name llogic_5. : pr5 (pr1, pr2, pr3, pr4, pr5, pr6, pr7, pr8, lpt1) printer 5 logical p...
Page 116
Intermec ethernet adapter user’s manual a-8 sample configuration parameters (continued) pr1_aft. : pr1 string after print job pr1_dump. : no pr1 hex dump mode pr1_size. : a4(a4, letter, legal, execut) pr1 postscript page size pr1_ornt. : portr (portr, lands, r_portr, r_lands) pr1 postscript page ori...
Page 117
Configuration parameters a-9 a sample configuration parameters (continued) --- printer4 menu pr4_in. : auto(none, auto) pr4 read-back of information pr4_bef. : pr4 string before print job pr4_str. : pr4 string substitutions pr4_cset. : none (none, iso>ibm, 7uk>ibm, 7sw>ibm, 7ge>ibm, 7fr>ibm, 7nd>ibm...
Page 118
Intermec ethernet adapter user’s manual a-10 sample configuration parameters (continued) pr6_size. : a4(a4, letter, legal, execut) pr6 postscript page size pr6_ornt. : portr(portr, lands, r_portr, r_lands) pr6 postscript page orientation pr6_form. : 66 0 100 60 30 50 pr6 postscript page format (mpl,...
Page 119
Configuration parameters a-11 a sample configuration parameters (continued) --- output menu l1_centr. : hispeed (ibm_pc, stndrd, fast, hispeed) lpt1 centronics interface timing l1_bsytm. : 60 lpt1 busy status time-out. All status reporting disabled if set to 0. L1_mgm_info. : auto (disable, auto) lp...
Page 121: Technical Specifications
Technical specifications b.
Page 123: Software Specifications
Technical specifications b-3 b this appendix provides the specifications for the ethernet adapter. All specifications are subject to change without prior notice. Software specifications supported systems novell netware versions 3.11, 3.12, 4.10, and above, supporting both nds and bindery emulation. ...
Page 124: Physical Specifications
Intermec ethernet adapter user’s manual b-4 supported protocols netware ipx, sap, rip, spx, snmp, ncp (extended with nds), nlsp, diag. Windows and os/2 netbios/netbeui or tcp/ip, wins/nbns. Lantastic netbios/netbeui. Tcp/ip lpd, ftp, telnet, reverse telnet, pros, bootp, arp, rarp, dhcp, icmp, ip, tc...
Page 125
Technical specifications b-5 b parallel printers one ieee 1284 compliant high-speed parallel port, 36-pin centronics connector. Sustained throughput up to 400k per second using netware or lan server/lan manager. Bi-directional support for apple, reverse telnet, pros. Front panel 2 led indicators: po...
Page 127: Index
Index i.
Page 129
Index i-3 i a about this manual, xii account button, 8-6 account file ftp, 8-13 telnet, 8-14 adding strings before and after print jobs, 7-8 aix (ibm rs/6000, bull dpx 20), 7-4 anarchie, 6-3 apple ethertalk, 6-3 arp described, 2-8 downloading the ip address, 2-9, 2-10 ascii to postscript, 7-9 attach...
Page 130
Intermec ethernet adapter user’s manual i-4 f factory default settings, 1-9, 8-6 features, 1-6 fetch, 6-3 file transfer protocol, see ftp finding printer information, 8-11 firmware downloading upgrade, 9-3 upgrading, 9-3 flash memory, upgrading, 9-3 freebsd (berkeley unix), 7-4 ftp account command, ...
Page 131
Index i-5 i network changing settings, 8-9 compatible with the adapter, 1-5 connecting to, 2-3 environment window, 8-9 installation guide, 2-3 led, 1-5 management, b-4 management system, 8-16 privileges for tcp/ip, 2-7 nms software, 8-16 notification messages, 8-18 novell distributed print services,...
Page 132
Intermec ethernet adapter user’s manual i-6 tcp/ip (continued) operating systems supporting, b-3 print methods, 7-4 protocol stack, installing, 4-11 setting up for, 2-7 unix, 7-3 unix print methods, 7-4 to 7-6 with windows, 4-3 telnet account file, 8-14 status file, 8-15 using to manage and configur...