Intermec IF5 Quick Start Manual - page 8
8
IF5 Fixed Reader Quick Start Guide
Front Panel Port Descriptions
Port Name Description
AC power
Main AC power port.
Ethernet
Ethernet port. Use a standard Ethernet cable to
connect the IF5 to your wired network.
Serial
RS-232 serial port. Use a DB9 null-modem cable
(P/N 059167) to connect the IF5 to a desktop PC for
configuration or maintenance.
Control
General purpose input/output (GPIO) interface. Use a
standard DB25 cable (P/N 236-057-001) to connect
the IF5 to the GPIO Terminal Block accessory.
Understanding the Rear Panel Ports
The IF5 ships with terminators installed on RFID antenna ports
2, 3, and 4. Do not remove the terminator from any port unless
you are installing an antenna on that port.
RFID antenna ports
(4 places)
802.11g
antenna ports
(2 places)
Terminator
IF5 Rear Panel
Note: The IF5 ships with RFID antenna ports 2, 3,
and 4 software disabled.