Intermec IP3 Intellitag Quick Start Manual - Using The Portable Reader

Other manuals for IP3 Intellitag: Installation Instructions, Instructions
Manual is about: Portable Reader (UHF)

Summary of IP3 Intellitag

  • Page 1

    Quick start guide portable reader (uhf) ip3 intellitag.

  • Page 2: Packing List

    2 ip3 intellitag portable reader (uhf) quick start guide packing list check to ensure that you receive these items: s intermec r ip3ua1104 intellitag portable reader (uhf) s battery pack (p/n: 318-014-001) s compliance statement s warranty card setting up your 700 color mobile computer before using ...

  • Page 3: 700 Color Mobile Computer

    3 ip3 intellitag portable reader (uhf) quick start guide connecting the portable reader to the 700 color mobile computer rf exposure regulations limit exposure to radiofrequency (rf) radiation. To comply with these regulations, operators of this device must maintain a distance of at least 20 cm. (8 ...

  • Page 4

    4 ip3 intellitag portable reader (uhf) quick start guide 1 slide your mobile computer into your portable reader. 2 ensure it slides in all the way. Your mobile computer com- municates with the reader via the irda. Therefore, the irda signal passing from the portable reader must have a good irda acce...

  • Page 5: Explanation

    5 ip3 intellitag portable reader (uhf) quick start guide removing the 700 color mobile computer from portable reader 4 remove the two retaining screws. 5 grasp the 700 color mobile computer at the display end, and simultaneously lift up (away from the reader), then pull forward. Portable reader led ...

  • Page 6

    6 ip3 intellitag portable reader (uhf) quick start guide battery installation and removal to charge the battery contained in your portable reader, it is necessary to remove the battery from the handle and place it in the ip3u dual battery pack charger. This charging unit charges the battery in four ...

  • Page 7: Using The Portable Reader

    7 ip3 intellitag portable reader (uhf) quick start guide using the portable reader 1 charge battery four hours before using the first time. 2 squeeze trigger on reader to check capacity of battery (bot- tom led). 3 aim the reader front at the id tag and squeeze the trigger. To obtain a good first ti...

  • Page 8: Performance Specifications

    8 ip3 intellitag portable reader (uhf) quick start guide performance specifications you can expect to read at least six tags per second up to three feet. Attempting to read tags beyond these specifications produces poor results. Sometimes using the reader continuously reading tags may result in the ...

  • Page 9

    9 ip3 intellitag portable reader (uhf) quick start guide overall performance dispatch rates spec detail rfid tag identification rate at lease six tags per second with one to ten tags per field, located at half the maxi- mum read distance from the reader front panel. Rfid tag read distance 36 inches ...

  • Page 10

    10 ip3 intellitag portable reader (uhf) quick start guide reader configuration access summary function responsibile party control machanism change country code factory or intermec field technician hardware key or config- uration tag etc. Download updated firmware remote or on-site field technician i...

  • Page 11

    11 ip3 intellitag portable reader (uhf) quick start guide telephone support these services are available from intermec technologies corpo- ration. Service description in the u.S.A. And canada call 1-800-755-5505 and choose this option factory repair and on-site repair request a return authorization ...

  • Page 12

    12 ip3 intellitag portable reader (uhf) quick start guide corporate headquarters 6001 36th avenue west everett, washington 98203 tel 425.348.2600 fax 425.355.9551 www.Intermec.Com *962054065c* pn 962-054-065c ip3 intellitag portable reader (uhf) quick start guide august 2004 u.S.A. E 2003 by interme...