J&D MAnufacturing STORM WITH CONE Manual
NOTE: Read ALL instructions over carefully before attempting
to install the Storm with cone.
If you have any questions please call your local dealer or
J&D Manufacturing at: 1-800-998-2398.
Or visit our website at: www.jdmfg.com
STORM
WITH CONE
55” Fiberglass Exhaust Fan
PARTS LEGEND
WARRANTY
J&D Mfg. warrants all products are free from defects in materials and workmanship under
normal use for the period of one year from date of purchase and our warranty does not
cover normal or regular wear and tear. J&D Mfg can repair or replace at our option, any
product or part of the product that is found to be defective. Our warranty applies to
materials only and does not include return freight, delivery, loss or damage to personal
property, cost of removal or installation, any incidental or consequential damages or labor.
This warranty does not apply to products which are misused, abused, altered, improperly
installed or subject to negligence. All warranties must be approved through our warranty
department. The original purchaser must present a copy of the invoice for the defective
product. One year is our standard warranty unless specified on our literature or in the
installation instructions/user manuals.
INSTALLATION HARDWARE IS NOT PROVIDED
IS198-09H
RECOMMENDED TOOLS FOR INSTALLATION AND ASSEMBLY
(NOT PROVIDED)
Measuring
Tape
Safety Glasses
INCLUDED ASSEMBLY HARDWARE - TO SCALE
Guard
Shutter
Housing
(8) Flat Washer
5/16
”
1/2"
Socket
Socket Wrench
Drill
and Drill Bits
3/16”
3/8”
(8) 3/16” x 1/4"
Aluminium Rivet
(8) 3/16”ID x 1/2"OD
Aluminium Rivet
Rivet Gun
(8) Shutter Clips
(13) Phillips Truss Bolt
5/16”-18 x 1”
(13) Nylock Flange Nut
5/16”-18
Cone
Construct structurally sound 59¾” square finished opening.
59 ¾”
59 ¾”
FINISHED
OPENING
(Inside Dimensions)
NOTE: Read
ALL
instructions over carefully before attempting
to install the Storm with cone
55” Fiberglass Exhaust Fan
Correct orientation of fan. From the inlet side, the motor will be located
above and to the right of the shaft.
Motor
View from inlet
side of fan
Phillips
Screwdriver