Bluetooth helmet headset #hs-blu277edr series © 2008 j&m cor poration. All rights reser ved. 5/08 owner’s manual.
1. Product description the hs-blu277 is a high audio output, true stereo bluetooth wireless helmet headset that will link to most bluetooth enabled audio devices available today. This lightweight unit also features a plug for connecting to passenger’s standard j&m dual mode helmet headset for seamle...
Power linked/ pairing po wer on/off mul tifunction int vol a b c d e f g h i j k 5. Controls and functions a. Multifunction button – used for turning on/off bluetooth, pairing mode for bluetooth, answering cell phone, and other multifunction features. B. Bluetooth volume up – allows bluetooth volume...
Installation into full-coverage & flip-front style helmets the full-coverage type of helmet presents special challenges for headset instal- lation. If you do not feel you are up to the task, you may send your "un-modi- fied" helmet to our factory in tucson and we will perform the installation for a ...
Installation into a 3/4-style helmet 1. Begin by examining the ear pocket area in your hel- met. Make sure that there is sufficient room to mount the speaker in the ear pocket. If you will be mounting the j&m dynaport ® speakers also make sure that you can position the porting tube down along the se...
Pairing the hs-blu277 to bluetooth enabled devices (cell phone, bluetooth enabled mp3 players, gps audio command centers, or other bluetooth enabled devices. 1. Turn on the hs-blu277 with the on/off intercom volume control (d). Note: if you wish to use your hs-blu277 unit as a driver/passenger inter...
