Bluetooth helmet headset #hs-wls465 series © 2013 j&m corporation . All rights reserved. 4/13 owner’s manual.
1. Product description j&m’s #hs-wls465 performance series stereo bluetooth wireless helmet headset is designed for installation into most open-face, flip-front and full- face style helmets. Superior audio fidelity has been achieved with our ultra-slim and wide-fidel- ity helmet speakers, along with...
5. Controls and functions a. On/off pairing and intercom linking button – used for turning on/off, pairing mode for bluetooth, and linking headsets for intercom use. B. Multifunction button – used for answering cell phone calls; rejecting cell phone calls, toggling between music from an a2dp device ...
Important note: modern day helmets can present special challenges for wireless headset installation. If you do not feel you are up to the task, you may send your “un-modified” helmet to our factory in tucson and we will perform the installation for a nominal fee. (please call first to insure that we...
J&m wireless 465 series helmet headset installation instructions warning! Helmet speakers may not be legal in all jurisdictions. Check your local laws before using this product. J & m corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or...
J&m wireless 465 series helmet headset installation instructions warning! Helmet speakers may not be legal in all jurisdictions. Check your local laws before using this product. J & m corporation cannot control the circumstances surrounding the sale of this equipment, the quality of installation, or...
1. Plug the supplied ac adapter into the rear jack (d) on the hs-wls465. The red led will turn on to indicate that the battery is charging. The red led will turn off when the battery is fully charged (3.7v) and ready for use. The charger can also be left plugged into the unit for extended periods of...
Pairing and operation with a bluetooth enabled cell/smart phone and a bluetooth enabled mp3 player or stereo dongle. 1. Power-on the mp3 player or stereo dongle & put it into pairing mode. Put the hs-wls465 into a pairing mode. Both the mp3 player or stereo dongle and the hs-wls465 led’s will be fla...
