J&M Corporation JAMP-500HC06-SGR Installation and operation instructions manual

Summary of JAMP-500HC06-SGR

  • Page 1

    ? 2011 j&m corporation. All rights reserved. 12/11 500w 4-ch amplifier kit for 2006-2012 harley street glide fairing with rear speakers # jamp-500hc06-sgr installation and operation instructions.

  • Page 2

    Product description this exciting new j&m 4-channel 500w amplifier kit has been design specifically for use in the 2006-2011 harley® street glide with the harley hk radio along with a second set of speakers (4 total) mounted in the rear saddlebag or trunk pod position. This is a full range class g a...

  • Page 3

    Move outside fairing brace remove fig. D remove fig. E 7. Relocate the large plugs from the inside of the fairing braces to the outside of the fairing braces. (figure d) 8. Remove the (4) rubber grommets from the top of the factory radio. (figure d) 9. Remove the metal stud from the right side fairi...

  • Page 4

    Front factory speaker harness gray/ red green/ black green/ white white/ orange right left fl white fr red rl white rr red power harness front amplifier cigarette lighter green green/ brown brown white/ brown right speaker gray/ red green/ black left speaker white/ orange green/ white right speaker ...

  • Page 5

    Fig. J espa-5000 full range class g amplifier output power (rms) @ 1% 1000hz 14.4v cea 2006 stereo @ 4ohms 4 x 75 watts @ 13 amps eff 71% stereo @ 2ohms 4 x 125 watts @ 23 amps eff 66% frequency response -3db 1hz - 69khz s/nratio separation >90db >74db input sensitivity .35v - 3.9v input impedance 4...

  • Page 6

    Warranty registration form please fill out this card completely and mail it immediately after purchase. Please be sure that your zip code and serial number (if applicable) are legible. This will help us to serve you better. (please print) name ________________________________________________________...