J&M JMDM-IPBT-JCB03 Installation & Operation Instructions - page 3
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
3. Package Contents
• Digital music controller with connection harness
• iPod connection cable
• Auxiliary extension cable
to
rear-mounted
CB antenna
(not included)
black
3-pin plug
ground to
frame
fuse
holder
inline
noise
filter
battery post +
black 6-pin plug
black
9-pin
plugs
6-pin din
driver's
helmet headset
(not included)
passenger's
helmet headset
(not included)
red
black
orange
12 volt switchable
source
passenger
CB transmit
switch
6-pin
plugs
female
6-pin din
6-pin
plugs
black
2-pin
plug
iPod/iPhone
cable
iPhone/iPod
(not included)
power for
GPS
for radar
detector
J&M Plug-and-Play
Radar Detector Connection
Harness (Not Included)
Radar Detector
aux cable
Diagram A
4. Installation Instructions
1. Mount the JMDM-IPBT-JCB03 using zip ties or double sided tape
provided, taking into consideration cable lengths.
2. Plug the JMDM-IPBT-JCB03 into the black 6 pin plug from the
JMCB-2003E/K. (Diagram A)
3. If using an iPhone/iPod plug the cable into the JMDM-IPBT-
JCB03 and the iPhone/iPod.
4. If using an satellite radio or other auxiliary device use the aux
cable provided. Note: When using an auxiliary device the iPhone/
iPod will not be heard through the JMDM-IPBT-JCB03.