1.
2 items included with your model: transmitter aa batteries (4) assembled aircraft li-po battery (2) install the transmitter batteries open the rear cover of the transmitter. Insert the four aa batteries noting the polarity of the batteries molded into the transmitter case. Replace the cover on the t...
3 binding the model your model is shipped ready to fly. If you find the controls are not responding to the transmitter, it may be necessary to bind the radio system. Use the following to bind the radio system. 1. Turn on transmitter 2. Install the flight battery in airplane (if the transmitter and r...
4 flying your model your model has been designed for the intermediate model flyer who is familiar with the use of a four-channel radio system. It is available in mode 1 and mode 2. Always perform a range and flight check to make sure all controls are operating properly before flying your model. Rang...
5 trimming the model in flight if you find that your model does not fly straight, it may be necessary to adjust the trims for straight and level flight. Trimming is best done when flying at 1/2 to 2/3 power. Aileron trim if the model appears to turn slightly to the right or left, it may be required ...
6 spare parts the product team at j perkins hopes that you enjoy your new micro series warbird. Whether flying in your back garden or displaying on the included stand we think that the spitfire is a model that you’ll be proud to show off to your friends and flying buddies. If you ever need replaceme...
7 safety instructions for charging and using li-poly batteries • do not put the battery on, or near anything, that can catch fire when charging. • always charge the battery on a non-flammable base i.E. A metal tray. • do not disassemble the battery. • do not short-circuit the battery. • do not use, ...
8 have fun! We hope that you have many pleasant flights with your raf spitfire micro! J perkins distribution, lenham, uk www.Jperkinsdistribution.Co.Uk v3.10
