- DL manuals
- J-Power
- Toy
- Grob 120TP
- Assembly And Operating Manual
J-Power Grob 120TP Assembly And Operating Manual
Summary of Grob 120TP
Page 1
Assembly and operating manual grob 120tp specification: *length:51 ‐ 2/5"(1305mm) *wing span: 66 ‐ 9/10"(1700mm) *flying weight: 2800g(98-4/5oz.).
Page 2
Dear customer, congratulations on your choice of a factory-assembled model aircraft from the j-power light plane range and thank you for placing your trust in us. The model can very quickly be completed ready to fly. Please read right through these instructions and the separate information sheets be...
Page 3
Assembly and operating manual grob120tp 3 figs. 1 -picture shows the elevator surface ,control horns and hinges .Assemble the control horns and hinges to the elevator . Figs. 2 - cut up the elevator, drill hole in the location of install hinges. Fig. 3 -photo shows the hinges assembled on the elevat...
Page 4
Assembly and operating manual grob120tp 4 fig. 5 -assemble the elevator to fuselage ,and screw up it . Fig. 6 -cut up the rudder , drill hole in the location of install hinges fig. 7 -assemble the hinges to the rudder surface fig. 8 - connect the rudder lighting wire to the fuselage and assemble the...
Page 5
Assembly and operating manual grob120tp 5 fig. 9 -fixed the vertical with screw . Fig. 10 -assemble the vertical to the fuselage . Figs. 11 -heat the shrink tube .To avoid the collet chuck loosen figs. 12 - cut up the rudder , drill hole in the location of install hinges 10 11 12 9.
Page 6
Assembly and operating manual grob120tp 6 figs. 13 -assemble the hinges to the aileron . Figs. 14 -photo shows the hinges have settled in the aileron . Figs. 15 -photo shows the main wing support wood board.. Figs. 16 -apply glue to the board .Assemble the board to the main wings. 14 13 15 16.
Page 7
Assembly and operating manual grob120tp 7 figs. 17 -photo shows the main wing support bar have installed in the wings . - figs. 18 -assemble the control rods to the left and right main wings. Figs. 19 - assemble the control rods to the left and right aileron figs. 20 -assemble the main wings to the ...
Page 8
Assembly and operating manual grob120tp 8 figs. 21 - assemble the propellers and spinner cover with screws . Figs. 22 -photo shows the propellers connected on the cover . Figs. 23 -assemble the propellers on the motor . Figs. 24 -photo shows the finished view. 22 21 23 24.
Page 9
Assembly and operating manual grob120tp 9 figs. 25 -assemble the spinner to the spinner cover .Lock it with screw . Figs. 25 -photo shows the accessories figs. 27 -assemble accessories a,c and g to the vertical fin . Figs. 28 -assemble accessories d,h and e to the fuselage . 26 27 28 25.
Page 10
Assembly and operating manual grob120tp 10 figs. 29 -assemble the accessory b to the nosing of the plane . Figs. 30 -assemble the accessory f to the main wing . Figs. 31 -assemble the accessory i to the main wing . Figs. 32 - connect the channel wire leads to the receiver .And located the battery. 3...
Page 11
Assembly and operating manual grob120tp 11 figs. 33 - congratulations , you have completed the assembly process. We hope you enjoy flying your new model! Figs. 34 - photo shows the balancing weight. - place the canopy on the fuselage. - place the battery in the model of balancing; do not connect it....
Page 12
Assembly and operating manual grob120tp 12 fig.35 - charge the flight battery; connect the equalizer lead using and adapter lead matching your charger (adapter lead not included). Fig.36 - switch the transmitter on, and move the throttle stick to the “motor off” position. (diagram mode 1 right throt...
Page 13
Assembly and operating manual grob120tp 13 fig.37-40 function test - check the channel assignment at the receiver, and if necessary swap the plugs as necessary. - set the transmitter sticks and trims to centre. - the control surfaces should now also be at centre (neutral). Adjust the clevis where ne...
Page 14
Assembly and operating manual grob120tp 14 fig. 41 checking the electric power system - caution: position the throttle stick in such a way that the motor cannot possibly start running. 41.
Page 15
Assembly and operating manual grob120tp 15 - switch the transmitter on , and connect the flight pack check the direction of rotation of the motor: when viewed from the front, the output shaft must rotate anti-clockwise. If this is not the case, perhaps because you are using components other than tho...
Page 16
Assembly and operating manual grob120tp 16 j-power group co.,ltd 5th floor, a3 building, xinjianxing technology industrial park, fengxin road, guangming town, bao'an, shenzhen city, 518107 china phone: +86 755 33699201 fax: +86 755 33699203 www.Jpower.Hk.