J-Power Nano Warbirds P-47 Assembly And Operating Manual

Summary of Nano Warbirds P-47

  • Page 1

    Assembly and operating manual specification: *length: 19 ‐ 1/10"(485mm) *wing span: 21 ‐ 7/10"(550mm) *flying weight: 6 oz (175g) nano warbirds p ‐ 47.

  • Page 2

    Assembly and operating manual nano warbirds p-47 2 dear customer, congratulations on your choice of a factory-assembled model aircraft from the jpower nano warbirds range and thank you for placing your trust in us. The model can very quickly be completed ready to fly. Please read right through these...

  • Page 3

    Assembly and operating manual nano warbirds p-47 3 fig. 1 - glue the control rod to horizontal tail. (glue not included) fig. 2 - remove any excess glue and hold in position until glue sets. The photo shows the finished view. Fig. 3 - glue the control rod to vertical tail. (glue not included) fig. 4...

  • Page 4

    Assembly and operating manual nano warbirds p-47 4 fig. 5 - glue the control rod to wing set. (glue not included) fig. 6 - remove any excess glue and hold in position until glue sets. The photo shows the finished view. Fig. 7 - reverse the procedure to the left side. The photo shows the finished vie...

  • Page 5

    Assembly and operating manual nano warbirds p-47 5 fig. 9 - apply glue to the horizon tail (glue not included) fig. 10 - remove any excess glue and hold in position until glue sets. Figs. 11 - photo shows the finished view. Figs. 12 - apply glue to the horizon tai (glue not included) 9 10 11 12.

  • Page 6

    Assembly and operating manual nano warbirds p-47 6 figs. 13 - apply glue to the fuselage (glue not included) figs. 14 - assemble the horizon tail and vertical tail to fuselage figs. 15 - photo shows the finished view. Figs. 16 - connect the control rod to the vertical tail. 14 15 16 13.

  • Page 7

    Assembly and operating manual nano warbirds p-47 7 figs. 17 - tighten the control rod with screw. Figs. 18 - connect the control rod to the horizon tail. Figs. 19 - tighten the control rod with screw. Figs. 20 - connect the wing panel push rod to the servo arm at third hole. 17 20 19 18.

  • Page 8

    Assembly and operating manual nano warbirds p-47 8 figs. 21 - assemble the elevator push rod to the wing set. Figs. 22 - tighten the elevator push rod with screw. Figs. 23 - the photo shows the finished view. Figs. 24 - reverse the procedure to the left wing. The photo shows the finished view. 21 22...

  • Page 9

    Assembly and operating manual nano warbirds p-47 9 figs. 25 - apply glue to the scatter-gun. Figs. 26 - apply glue to the wing panel. Figs. 27 - assemble the scatter-gun to the wing panel ,photo shows the finished view. Figs. 28 - reverse the procedure to the left wing. The photo shows the finished ...

  • Page 10

    Assembly and operating manual nano warbirds p-47 10 figs. 29 - apply glue to the single scatter-gun. Figs. 30 - apply glue to the wing panel. Figs. 31 - assemble the single scatter-gun to the wing panel, photo shows the finished view. Figs. 32 - apply glue to the antenna. 29 30 31 32.

  • Page 11

    Assembly and operating manual nano warbirds p-47 11 figs. 33 - assemble the antenna to the fuselage. Figs. 34 - photo shows the finished view. Figs. 35 - apply glue to the radiator. Figs. 36 - assemble the radiator to fuselage. 36 35 34 33.

  • Page 12

    Assembly and operating manual nano warbirds p-47 12 figs. 37 - photo shows the finished view. Figs. 38 - reverse the procedure to the right side. The photo shows the finished view. Figs. 39 - assemble the main wing to the fuselage. Photo shows the finished view . Figs. 40 - tighten the fixup presser...

  • Page 13

    Assembly and operating manual nano warbirds p-47 13 figs. 41 - apply glue to the fuel tank. Figs. 42 - apply glue to fuselage. Figs. 43 - assemble the fuel tank to fuselage ,photo shows the finished view. Figs. 44 - apply glue to missile 41 43 42 44.

  • Page 14

    Assembly and operating manual nano warbirds p-47 14 figs. 45 - apply glue to wing set. Figs. 46 - assemble the missile to wing set ,photo shows the finished view . Figs. 47 - reverse the procedure to the right side. The photo shows the finished view. Figs. 48 45 47 48 46.

  • Page 15

    Assembly and operating manual nano warbirds p-47 15 - fix the main landing gear with screw. Figs. 49 - photo shows the finished view. Figs. 50 - reverse the procedure to the left side. The photo shows the finished view. Figs. 51 - photo shows the finished view. Figs.52 - apply a little glue to the n...

  • Page 16

    Assembly and operating manual nano warbirds p-47 16 figs. 53 - apply glue to the fuselage. Figs. 54 - assemble the nose cone to fuselage, photo shows the finished view. Figs. 55 - assemble the propeller to motor. Figs. 56 - fix the propeller with screw. 55 56 53 54.

  • Page 17

    Assembly and operating manual nano warbirds p-47 17 figs. 57 - connect to the receiver and place the receiver in the middle of the fuselage. Figs. 58 - photo shows battery leads connected to the speed controller. Figs. 59 - place the flight battery in the fuselage. Figs. 60 - opening and closing the...

  • Page 18

    Assembly and operating manual nano warbirds p-47 18 - reverse the procedure to replace the canopy. Figs. 61 - place the battery in the model of balancing; do not connect it. - make the centre of gravity on both sides. - support the model at the marked c.G. And allow it to hang freely. The model is c...

  • Page 19

    Assembly and operating manual nano warbirds p-47 19 fig. 64 - switch the transmitter on, and move the throttle stick to the “motor off” position. (diagram mode 1 right throttle control stick) - fig. 65and 66 - check the channel assignment of the control surfaces, and swap over the connectors at the ...

  • Page 20

    Assembly and operating manual nano warbirds p-47 20 the aileron and elevator functions fig. 67 checking the electric power system - caution: position the throttle stick in such a way that the motor cannot possibly start running 69 67.

  • Page 21

    Assembly and operating manual nano warbirds p-47 21 - switch the transmitter on , and connect the flight pack - check the direction of rotation of the motor: when viewed from the front, the output shaft must rotate anti-clockwise. If this is not the case, perhaps because you are using components oth...

  • Page 22

    Assembly and operating manual a-1 j-power group co.,ltd 5th floor, a3 building, xinjianxing technology industrial park, fengxin road, guangming town, bao'an, shenzhen city, 518107 china phone: +86 755 33699201 fax: +86 755 33699203 www.Jpower.Hk.