J. W. Davis & Company DT-100D Operating Instructions Manual - page 2
N E W T E C H N O L O G Y
O L D R E L I A B I L I T Y
J.W. Davis & Company
• 3030 Canton Street • P.O. Box 710219 • Dallas, Texas 75371-0219
Sales 800-527-5705 • Fax 800-388-9106 • Corp 214-651-7341 • Fax 214-939-0328 • sales@jwd.com • www.jwd.com
WARNING: THIS APPLIANCE MUST BE GROUNDED
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Do not use a “3 to 2” power cord adapter or cut the AC power cord ground
prong on the AC power cord plug. Either of these actions will cause the J. W.
Davis & Company warranty to be voided.
7. MOH Output Level Control
8. 1-Watt / 8
Ω
Output
9. 1-Volt(RMS) / 600
Ω
Output
10. 12 VDC Input
REAR PANEL
1. FM Antenna Socket 75
Ω
2. AM Loop Antenna Terminals
3. Line Output Level Control
4. Mono / Stereo Output Switch
5. Left / Mono-1 Output
6. Right / Mono-2 Output
11. 120 VAC Input
The Mark of the Professional...
The J. W. Davis DT-100D Tuner has been specifically engineered with features for commercial and
industrial applications. The monaural output combines incoming stereo signals ensuring full frequency
response distribution throughout each speaker’s coverage area. The memory keys allow the desired AM/
FM stations to be preset to discourage tampering. A separate music-on-hold amplifier permits the volume
level of the music that is provided to incoming calls to be set separately from the line level out to the power
amplifier. A 12 VDC power connection is available for emergency power or for use in remote locations. A
memory chip retains station memory for 14 days if all power is lost. Large digital display permits easy
station identification. All necessary accessories for tuner use are included. 5 year warranty.
1. Power On/Off Button
2. VFD Display
3. FM Stereo LED
4. Band Selector Button
5. Station Scan Button
6. FM Stereo Button
7. Auto Scan and Store Station Button
8. Station Seek Up/Down Buttons
9. Station Pre-Set Buttons
10. Station Tuning Knob
FRONT PANEL