J&W G31 + ICH7 Chipset User Manual - page 24
- 2 -
G31 Series User's Manual
►
PCI Express Configuration
Click
this item sets the active state for express PCI between disabled and enabled.
►
Smbios Configuration
Click
item sets SMBIOS Smi support for PnP function within the optional, between enabled
and disabled.
►
USB Configuration
Click
allows you to select USB function within the environment.
4.5.5 Advanced Chipset Features
CMOS Setup Utility - Copyright (C) 1985-2004,American Megatrends,Inc.
Advanced Chipset Features
Advanced Chipset Settings
WARNING:Setting wrong values
may cause system to
► North Bridge Configuration
► South Bridge Configuration
► Colorful Magic Control
in below sections
malfunction.
[
Press Enter
]
[Press Enter]
[Press Enter]
Item Help
Configure North Bridge
features.
↑
↓
→←
:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7: Previous Values F8: Fail-Safe Defaults F9: Optimized Defaults
Press Enter
►
North Bridge Configuration
Click
chipset configuration, this item sets the memory remap feature, DRAM frequency,
DRAM timing by SPD, memory hole, initate graphic adapter, internal graphics mode
select and PEG port selection.
►
South Bridge Configuration
Click
chipset configuration, this item sets USB functions, audio controller, PCIE ports
selection.
►
Colorful Magic Control
Click
clock configuration, the CPUvore and Memoryvcore will automatic on the screen, also,
the CPU Voltage and Memory voltage can be set according to your selection; the clock
configuration sets the PCIE LAN, BIOS write protect function.