J Well Ivary User Manual - 2. Charging Your J Well

2. Charging your J Well 

IVARY

The IVARY uses a battery with a power saving 

function/safty function allows you to turn on and 

off the battery. This prevents accidental discharge 

of battery when not in use. To avoid damage to your 

IVARY under normal conditions,it takes without 5 

hours to charge the battery.  The IVARY battery has 

a microchip to prevent overcharging. The charger 

will automatically shut down when battery gets 

fully charged. 

To charge the battery, gently screw the battery into 

the USB charger and plug USB cable into a wall 

charger or a computer. Battery should fl ash to show 

it is being charged. The light on the USB charger is 

red in the process and turns green when the battery 

gets fully charged. 

You should use only the dedicated USB charger 

provided to avoiddamaging battery. Use the high 

voltage USB port to charge batteryproperly. Charge 

the battery fully before using to maintain a good 

battery life.

16

17

1.

USB Charger

2.

Wall Charger