Summary of Tellus Mobi
Page 1
Tellus mobi user manual ver. 1.0 1 mobi.
Page 2
Tellus mobi user manual ver. 1.0 2.
Page 3
Tellus mobi user manual ver. 1.0 3 user manual tellus mobi content introduction………………………………….. 5 general characteristics……………………... 7 how to switch on the tellus mobi …………. 5 connectors and buttons ……………………. 9 touch screen calibration …………………… 13 battery and charging ……………………….. 15 infra red remote ...
Page 4
Tellus mobi user manual ver. 1.0 4.
Page 5: Introduction
Tellus mobi user manual ver. 1.0 5 introduction the tellus mobi is a portable dynamic display solution for augmentative and alternative communication. The tellus mobi is an xp based computer platform with additional features such as high quality stereo speakers, an alternative access interface for s...
Page 6: General Characteristics
Tellus mobi user manual ver. 1.0 6 general characteristics • geode lx800 500 mhz microsoft windows xp tablet pc edition 1 gb sdram 5 gb hard disk • 1 usb 2.0 port • clear 8,4“ svga transmissive tft screen (800 x 600) • touch screen • two mini-jack connectors for switches • internal replaceable li-on...
Page 7
Tellus mobi user manual ver. 1.0 7 how to switch on the tellus mobi press the power on switch shortly to power up the tellus mobi. The power indicator light will turn on to indicate that the tellus mobi is starting up. This might take a while as the device will start windows xp home edition and load...
Page 8
Tellus mobi user manual ver. 1.0 8.
Page 9: Onnectors And Buttons
Tellus mobi user manual ver. 1.0 9 c onnectors and buttons dc use this input to connect the tellus mobi with the adapter/charger that is delivered with the device. Do not use another adapter. Using another adapter might damage the tellus mobi. Avoid charging the tellus mobi when the unit is operatin...
Page 10: Switch 2
Tellus mobi user manual ver. 1.0 10 switch 2 this is the input for switch 2 when operating the tellus mobi with 2 switch scanning. System button esc hold the system button for more then 2 seconds to emulate a keyboard escape function. This will allow you for instance to stop scanning when you are us...
Page 11: Usb
Tellus mobi user manual ver. 1.0 11 usb tellus mobi has one usb master port 2.0. If you want to connect more then one usb peripheral you can use a usb hub. Headphone the headphone output will not automatically switch off the speakers. Both speakers and headphone are controlled by software (see mobi ...
Page 12
Tellus mobi user manual ver. 1.0 12 to remove the battery, press the battery lock with a stylus and shift the battery cover to the right. The battery becomes visible. You can shift the battery out of the device. The battery has a groove to avoid wrong polarisation when replacing. Replacing the batte...
Page 13: Touch Screen Calibration
Tellus mobi user manual ver. 1.0 13 touch screen calibration tellus mobi has a touch screen that can be operated by using a finger or stylus. Avoid using sharp items to touch the screen. In case you would need to recalibrate the touch screen double click the calibration icon in the control panel . T...
Page 14
Tellus mobi user manual ver. 1.0 14 touch it at the exact location. Repeat this for the left and right corner on the bottom of the screen. Finally a cross edge will appear in the center of the screen. Shortly touch it at the exact location. The calibration has now been finished. It is not necessary ...
Page 15: Battery And Charging
Tellus mobi user manual ver. 1.0 15 battery and charging the tellus mobi has an internal li-ion battery and is designed to operate approximately 8 hours, based on average use. Of course the autonomy of the battery depends on the frequency of usage and the settings of the power management. Only use t...
Page 16
Tellus mobi user manual ver. 1.0 16 use a pencil to press the battery lock and slide the battery sleeve away from the tellus mobi. The battery now becomes visible and you can take it out of the device: the battery has a groove to avoid wrong polarisation when replacing. Replacing the battery should ...
Page 17: Nfra Red Remote Control
Tellus mobi user manual ver. 1.0 17 i nfra red remote control the tellus mobi can be (optionally) equipped with a programmable infrared remote control unit (gewalinked). This unit can learn and transmit infrared codes of for instance your television, cd player… programming ir codes mind express has ...
Page 18
Tellus mobi user manual ver. 1.0 18 put your remote control (in this example it will be the remote control of your television) in front of the ir window of the tellus mobi. The distance between your remote control and the ir windows should be about 2 inches. On the tellus mobi screen: press the lear...
Page 19
Tellus mobi user manual ver. 1.0 19 press the button on your remote control of the code you want the tellus mobi to learn (in this case the ir code for television volume up). Keep the button pressed until the red light in the ir window of the tellus goes out or the status line in the gewa window wil...
Page 20
Tellus mobi user manual ver. 1.0 20 the red light will blink shortly to confirm that the record procedure has been finished successfully. In the status line an ok will appear. Repeat this procedure for all ir codes you want the tellus mobi to learn..
Page 21: Transmitting Ir Codes
Tellus mobi user manual ver. 1.0 21 transmitting ir codes to link an ir code to a specific cell in the mind express grid you need to go into edit mode and choose the command: send to gewa. Choose select command and press the select button. Press the down arrow to get the list of available ir codes..
Page 22
Tellus mobi user manual ver. 1.0 22 make a choice and fill in the repeat frequency of the specific code. This is useful for volume control for instance. The chosen command will now appear in the list. You can press ok or add another command to build a macro. This can be useful to make tv channel sel...
Page 23: Mobi Tool
Tellus mobi user manual ver. 1.0 23 mobi tool tellus mobi system settings like screen brightness, speaker volume…, can be controlled with the mobi tool. Double click the icon to open the mobi tool. The following window appears on your screen: speaker volume button turns on or off the speakers. The n...
Page 24: Headphones
Tellus mobi user manual ver. 1.0 24 the headphones button turns on or off the headphone output of the tellus mobi. With the + and – button you can change the volume. Brightness: with the + and – button you can change the brightness of the screen. The brightness setting will affect the autonomy of te...