- 1 - mfj51006.
User manual ja-60gsm - 2 - mfj51808 - 2 - mfj51006 1. User features of the gsm dialer the ja60gsm dialer offers many useful features described in detail below. The installer should properly demonstrate the use of the system to the user after installation and instruct the user on how to set user acce...
User manual ja-60gsm - 3 - mfj51808 - 3 - mfj51006 notes: the system confirms an am command with a reply sms. when system arming is impossible e.G. It is in the programming mode, you will be notified about the situation via a reply sms. If the alarm system is “split” the instruction will effect ...
User manual ja-60gsm - 4 - mfj51808 - 4 - mfj51006 1.10. Alarm system remote control via a telephone keypad if you want to operate the alarm system via a phone (mobile or landline), perform the following: dial the gsm dialer number. An attached telephone will ring. if the phone is not answered t...
User manual ja-60gsm - 5 - mfj51808 - 5 - mfj51006 2. Sms and audible alarm reports setting the factory default settings allow the gsm dialer to send sms reports and audible warnings when the control panel generates important pertinent information (alarms, arming, etc.). It is only necessary to set ...
User manual ja-60gsm - 6 - mfj51808 - 6 - mfj51006 3. 73 ____ f0 - alarm sms - alarm call (audible warning) 4. 74 ____ f0 5. 75 ____ f0 - any alarm, arming & disarming sms. - alarm call (audible warning) - technical sms 6. 76 ____ f0 7. 77 ____ f0 - alarm call (audible warning) 8. Technical sms abou...
User manual ja-60gsm - 7 - mfj51808 - 7 - mfj51006 3.2.1. Table – sms reports assignments to telephone numbers.
User manual ja-60gsm - 8 - mfj51808 - 8 - mfj51006 - 8 - mfj51006 3.3. Sms texts editing the list of sms texts stored in the dialer consists of texts reported as event reports (installation name, event name and source name) and texts for remote control instructions. All these texts can be edited by ...
User manual ja-60gsm - 9 - mfj51808 - 9 - mfj51006 - 9 - mfj51006 4. General settings enter the user mode (see section2.) before using any of the following sequences. 4.1. Remote access code 9 4 xxxxxxxx f1 where: xxxxxxxx is the code, it can have from 1 to 8 digits if you enter 94f1 - the code is e...
User manual ja-60gsm - 10 - mfj51808 - 10 - mfj51006 - 10 - mfj51006 the emergency number can be entered by: 99 xx...X f0 where: xxx…x is a telephone number (max. 20 digits), enter f9 before the number if you need + prefix for international calls 4.6. Remote programming of the alarm via sms the comm...
User manual ja-60gsm - 11 - mfj51808 - 11 - mfj51006 - 11 - mfj51006 5. Web server remote access 5.1. Setting possibilities: the setting server allows a user to read and change the control panel and dialer configuration. Data transfer is made by sending an sms. The web site allows the user to change...
- 12 - mfj51006 - 12 - mfj51006.
