Jabra BT2050 User Manual - page 6
5
EN
g
Li
Sh
Jabra bt2050
make sure that your headset is fully charged for two hours before
you start using it . use the aC power supply to charge from a
power socket . When the light indicator (led) has a solid led light,
yourheadsetischarging.WhenthesolidLEDlightturnsoff,itis
fully charged .
Useonlythechargerprovidedinthebox-donotuserchargers
from any other devices as this may damage your headset .
Pleasenote:Thelifetimeofthebatterywillbesignificantly
reduced if your device is left uncharged for a long period . We
therefore recommend that you recharge your device at least
once a month .
TURNiNg yoUR hEAdSET oN ANd off
• Presson/offbuttonforapprox.2secondstoturntheheadset
onoroff.
PAiRiNg iT WiTh yoUR PhoNE
headsets are connected to phones using a procedure called
‘pairing’ . by following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
1. Put the headset in pairing mode
•
WhenyouturnonyourJabraBT2050forthefirsttime,the
headsetwillautomaticallystartupinpairingmode–i.e.itis
discoverable for your phone . When the headset is in pai
ring
mode the led is constantly lit .
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2050
• Followyourphone’sinstructionguide.Firstmakesurethat
bluetooth is activated on your mobile phone . then set your
phone to discover the headset . this usually involves going
to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone and
selectingtheoptionto‘discover’or‘add’aBluetoothdevice.*