Jabra Freespeak BT200 Quick Start Manual - page 2
6
Making a call
If FreeSpeak is not already on, turn it on now.
Using phone’s keypad
1.
Dial number on keypad.
2.
Press phone’s “send” key.
Using voice-activated dialing (after you’ve set up
voice tags on your phone)
1.
Press and release
. You’ll hear
ONE
short
beep while doing this.
2.
You’ll then hear a tone; then say the name of
the person you wish to call.
7
Ending a call
•
Press and release
OR
•
End call from phone’s keypad.
8
Answering a call
•
After you hear the ring tone, press and release
OR
•
Answer the call with your phone’s keypad, then
transfer the call to the headset by pressing and
releasing .
9
Call-waiting
•
Use standard method from your phone’s keypad
(recommended)
OR
What you see
What you hear
Flashes
every
second
Flashes
every 3
seconds
Quick series of
TWO
tones — low to high
pitch (when active
mode starts)
Quick series of
TWO
tones — high to low
pitch (when standby
mode starts)
Status
Active Mode
• Call in progress
• Up to 3 hours of
talk-time*
Standby Mode
• Waiting for call
• Up to 100 hours
of standby time*
* Depending on phone type and usage.
BASIC OPERATIONS
4
Turning headset on/off
Press the multi-function button
for 3 to 5 seconds
until you see a
burst of flashes
on the blue indicator
light, then release.
The indicator light will flash while
the power is on.
If you are already wearing the headset, you’ll hear a
quick series of
FOUR
tones when turning the headset
on or off. When turning the headset on, the tones will
go from low to high pitch, and when turning off, the
tones will go from high to low.
IMPORTANT:
Do not hold the
button down
too long (more than 3 to 5 seconds) when turning
the headset on or else it may go into pairing
mode, and the blue indicator light will turn solid.
If that happens, turn off the headset, wait 3 to 5
seconds, and repeat process for turning the
headset on.
5
Choosing wearing preference
FreeSpeak is ready to wear on the right ear. If you
prefer the left, gently rotate the MiniGel 180°.
•
Press and release
once to switch between
calls (some phones do not support this headset
feature).
IMPORTANT:
Do not hold the
button down
too long when making, ending, or answering a
call. This should only be a quick tap.
10 Status indicators
JABRA
®
FreeSpeak
™
BT200 QUICK START GUIDE
For Most Bluetooth
™
Phones
2
www.jabra.com
J A B RA