Jabra HT-Two User Manual - Ht -T
HT -T
wo
User Guide
HT-Two System Components and Description
The HT-Two is an FCC-approved phone for connection to a compatible PABX or direct exchange analog line. It can be used with an analog
modem for CTI applications, or as a stand-alone unit for incoming calls. It can also be used in parallel with an approved analog desktop
phone for headset use.
Headset Stand
Ringer Volume Control
(located under cover)
Phone ON/OFF Switch
Mute Function
Volume Control
Quick Disconnect
GN Netcom, Inc.
77 Northeastern Boulevar
d
Nashua, NH 03062
1-800-826-4656
www .gnnetcom.com
HT-Two Feature Set
Phone Switch
In the “on” position a phone call is
answered, and in the “off” position
a call is released.
Phone Switch LED
A solid light indicates the phone
switch is in the “on” position or a
call is in progress. A flashing light
indicates an incoming call.
Mute Switch
In the “on” position the user will
not be overheard by the person on
the other end of the line. When
activated, the mute LED flashes to
indicate the microphone is muted.
Volume Switch
Sliding toward “high” increases
your receive volume, while sliding
toward “low” decreases the audio
receive.
Tone Ringer
The HT-Two provides an audible
tone ringer through the headset
when there is an incoming call.
Ring Adjustment
To adjust the tone ringer sound
level to the headset, slide the cover-
plate to the left and lift off. While
the phone is ringing, turn the rotary
switch to increase or decrease ringer
volume.
54-0017-A
Printed in USA, August 1999