Jabra IBM lotus sametime User Manual - page 4
VerIfy InStallatIon
to verify the installation start Jabra device service by clicking on
the start button in windows’ taskbar and select all Programs,
Jabra, Jabra Pc suite, Jabra device service. after a few seconds
a Jabra logo icon will appear in the notification area in windows’
taskbar. right-click on this icon and select open device service.
thIS brIngS up the wIndow below:
in the installed Jabra Pc suite softphone drivers table make sure
the softphone status is ready and the driver status is started for
ibm Lotus sametime. if the driver status is not started select the
ibm Lotus sametime row in the table and press the start button.
the table contains two rows for ibm Lotus sametime, one for ver-
sion 8.0.x and one for version 8.5.x. make sure the driver version
matching your sametime version is ready.
If the Softphone StatuS IS not ready VerIfy that
a. Lotus sametime connect has been started and you have logged
in.
b. the Jabra plug-in for sametime has been installed in sametime
connect as explained above.
make sure the softphone in focus selection is set to “ibm Lotus
sametime”.
teSt the plug-In
when you have verified the installation and Jabra device service
and the ibm Lotus sametime driver is running you can start up
ibm Lotus sametime connect to start testing the Jabra headset
integration in sametime.
Plug-in a Jabra device into a Usb port on the Pc and start a call in
sametime. You should now be able to perform these actions from
the headset buttons (features available depends on the type of
Jabra headset):
- accept an incoming call
- end the active call
- Put active call on hold
- resume a call on hold
- mute the headset microphone
- Un-mute the headset microphone
unInStallatIon
to uninstall the plug-in from Lotus sametime connect follow the
steps below.
1. open the tools menu and select Plug-ins, manage Plug-ins…
2. in the window below find and select the “Jabra sametime
Plugin” feature in the tree view on the left hand side.
in the panel on the right hand side you click on the Uninstall link.